Red100 Lighting Red100 Beacon Smart LED Bulb Installation Guide
- June 6, 2024
- Red100 Lighting
Table of Contents
Red100 Lighting Red100 Beacon Smart LED Bulb
Warning
FCC Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator& your body.
ISED RSS Warning/ISED RF Exposure Statement
ISED RSS Warning:
This device complies with Innovation, Science, and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator& your body. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Product features
- l. App dimming and color matching
- Energy-saving and emission reduction, long service life
- Stable performance, safety and reliability
- Changeable colors, high-end atmosphere
- Convenient installation and wide applicability
Installation steps
- Cut off all the electronics components
- Reconnect the circuit as indicated in the picture
- Turn on the lamp holder
- Screw the lamp into the lamp holder
- The lamp is not suitable for discharge within 15cm
Precautions during use
- .Before use, determine whether the lamp is damaged or loose.
- Pay attention to the power supply voltage before installing lamps
- The light source of the product cannot be changed at will, and the structural parts and seals can not be disassembled
Download original steps:
- Open the mobile app store and search for TUYA Smart. The above interface is displayed. and click 11 lnstall11 button
- Click open or return to the desktop to open on the desktop
Dimming steps:
Connect the lamp to 120V voltage
The light starts to flash. turn on the mobile app, click the plus sign in the upper right corner
Click next
Click the plus sign in the upper right corner of the device to
be connected
After the distribution network is completed, it will
automatically jump to the dimming interface. The color temperature between
2700-6500k can be called out in the upper circular area, and the brightness of
the lower
arc-shaped adjusting rod can be l % – l 00%.
Click the color light in the upper left corner to switch to the
color light adjustment page. The color of the color light can be adjusted in
the circular area above, and the brightness of the arc-shaped adjustment rod
below can be l % – l 00%.
Documents / Resources
|
Red100 Lighting Red100 Beacon Smart LED
Bulb
[pdf] Installation Guide
SLBC9BR302, 2A2VL-SLBC9BR302, 2A2VLSLBC9BR302, Red100 Beacon Smart LED Bulb,
Beacon Smart LED Bulb, Smart LED Bulb, LED Bulb, Bulb
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>