LiFud LF-GIF020YFIIxxxxH EU Standard Flicker Free Built in Track Light LED Driver User Manual

LiFud LF-GIF020YFIIxxxxH EU Standard Flicker Free Built in Track Light

LED Driver

Product Information

The LF-GIF020YFIIxxxxH is a 14-20W isolated constant current flicker-free LED driver. It is designed specifically for split-type LED track lights and is not suitable for integrated track lights or downlights. The driver has a built-in track light LED driver that complies with EU standards. It operates at an ambient temperature of up to 55°C and has an input voltage range of 220-240Vac. The output voltage ranges from 30 to 40Vdc, and the output current ranges from 350 to 500mA. The LF-GIF020YFIIxxxxH comes in two versions: a full external casing version and a bare board + fixed bottom casing version.

Product Usage Instructions

1. Ensure that the ambient temperature does not exceed 55°C during operation.
2. Verify that the input voltage is within the range of 220-240Vac.
3. Connect the LF-GIF020YFIIxxxxH LED driver to the split-type LED track light.
4. Make sure that the integrated track light or downlight is not connected to the driver.
5. Select the appropriate output voltage and current settings based on your specific LED track light requirements.
6. If using the full external casing version, install the driver in a suitable enclosure to protect it from external elements.
7. If using the bare board + fixed bottom casing version, securely mount the driver to a compatible mounting surface.
8. Follow any additional installation guidelines provided by the track light manufacturer.
9. Ensure proper electrical connections are made according to the manufacturer’s instructions.

Product Description

LF-GIF020YFIIxxxxH is a 14-20W isolated constant current flicker-free LED driver. It is suitable for split-type LED track light (any integrated track light or down light is forbidden) and its ambient temperature shall NOT exceed 55℃. Its input voltage ranges from 220 to 240Vac; output voltage range from 30 to 40Vdc and output current ranges from 350 to 500mA. It has 2 optional versions: full external casing version & bare board + fixed bottom casing version.

Features

• Suitable for Class II light fixtures
• Ta: 55℃
• Modulation depth <0.5%
• High efficiency; low THD
• 5-year warranty (please refer to the warranty condition)

Applications

• Indoor office lighting
• Decorative lighting
• Commercial lighting
• Residential lighting

Product Naming

Electrical Characteristics

Output

| Output Voltage| 30-40Vdc
Output Current| 350mA| 400mA| 450mA| 500mA
Flicker Index (Modulation depth)| ****

<0.5%

CIE SVM| ≤0.4
IEC-Pst| ≤1
Current Tolerance| ±5%
Temperature Drift| ±10%
Start-up Time| <0.5S

Input

| AC Input Voltage| 220-240Vac (limit: 200-264Vac)
Input Frequency| 47Hz-63Hz
Input Current| 0.13A max.
Power Factor| ≥0.9
THD| ≤20%
Efficiency| ≥85.5%| ≥86%| ≥86.5%| ≥87%
Inrush Current| ≤20A&150uS
Load Quantity Carried by the Circuit Breaker| Circuit Breaker Model| B10| C10| B16| C16
Quantity (pcs)| 39| 65| 62| 104
Leakage Current| ≤0.7mA
Standby Power Consumption| ****

<0.5W

Protection Characteristics

| Open Circuit Protection| ****

<55V

Short Circuit Protection| ****

Hiccup mode (auto-recovery)

Environment Description

| Operating Temperature| ****

-30℃ – +55℃ & Tc ≤90℃

---|---|---
Operating Humidity| 0-95%RH (no condensation)
Storage Temperature/Humidity| -30℃ – +80℃ (six months under class I environment);

0-95%RH (no condensation)

Atmospheric Pressure| 86kPa~106kPa

Safety & Electromagnetic Compatibility

| Certifications| TUV-ENEC, CE, CB, RCM, CCC
Withstanding Voltage| I/P-O/P: 3.75kVac&5mA&60S
Insulation Resistance| I/P-O/P: >100MΩ@500Vdc

Safety Standards

| ENEC: EN61347-1: 2015, EN 61347-2-13: 2014/A1: 2017,

EN 62384: 2016/A1: 2009;

CE-LVD: EN 61347-2-13: 2014/A1: 2017, EN 61347-1: 2015,

EN 62493: 2015;

CB: IEC 61347-1: 2015, IEC61347-2-3: 2014,

IEC 61347-2-13: 2014/AMD1: 2016;

RCM: AS 61347.2-13:018

CCC: GB19510.1-2009, GB19510.14-2009

EMI

| CE-EMC/RCM: EN55015, EN61000-3-2, EN61000-3-3 CCC:GB/T17743, GB17625.1, GB17625.2

EMS

| CE-EMC/RCM: EN61000-4-2, 3, 4, 5 (lightning strike 1kV), 6, 11

CCC: GB/T17626.2, 3, 4, 5 (lightning strike 1kV), 6, 11

Others

| IP Rating| IP20
RoHS| RoHS 2.0 (EU) 2015/863
Warranty Condition| 5 yrs (Tc<74℃)

Test Equipment

| AC power source: CHROMA6530, digital power meter: CHROMA66202, Oscilloscope: Tektronix DPO3014, DC electronic load: M9712B, LED board, constant temperature and humidity chamber, lightning surge generator: Everfine EMS61000-5B, rapid group pulse generator: Everfine EMS61000-4A, spectroanalyzer: KH3935, hi-pot tester: TH9201B, flicker tester (flicker-free coefficient test) 60N-01, etc.

Remarks

1. It is recommended that customer should install overvoltage and undervoltage protection devices and surge protection devices in the power supply circuits of the light fixtures to ensure safety before connecting to electricity.
2. The PC cover, casing, end caps and other parts of the LED driver inside the LED light fixture must conform to UL94-V0 flammability standard or above.
3. As an accessory, the LED driver is not the only factor determining the EMC performance of the LED light fixture. The structure and the wiring of the light fixture are also relevant. Thus it’s strongly recommended the LED light fixture manufacturer should re-confirm the EMC of the whole LED light fixture.
4. The test conditions of the circuit breaker configuration quantity are the same as those of the inrush current test.
5. Do not install the driver inside the integrated track light or down light.
6. The ambient temperature (Ta) of the driver shall not exceed 55℃ and casing temperature (Tc) not exceed 90℃.
7. Unless otherwise stated, the parameters above are test results under these conditions: ambient temperature 25℃, humidity 50%, input voltage 230Vac/50Hz and 100% load.
8. The positioning hole on the bottom casing of driver is Φ3.5mm. It is well-advised to use the screw with 5mm head diameter and M3 outer diameter when using the full external casing version; the screw with 6mm head diameter and M3 outer diameter when using the bare board + fixed bottom casing version.
9. Do not place the LED driver in the track head.

Characteristic Curves

PF Curve

Efficiency Curve

Lifetime Curve

Definitions of Terminals

INPUT

OUTPUT

LED+(red terminal)

|

Positive electrode output of the driver

---|---

LED-(black terminal)

|

Negative electrode output of the driver

Labels

Structure & Dimensions (unit: mm)

Packaging Specifications

Full external casing version

Bare board + fixed bottom casing version

Transportation & Storage

• Transportation

  • Suitable transportation means: vehicles, boats and aircraft.
  • During transportation, there should be awnings for rain protection and sun protection. Civilized loading and unloading are required. There should be no severe vibration or impact.

• Storage

  • Storage in accordance with the provisions of Class I environment. For products which have been stored for more than six months, they mustn’t be used until they pass the re-inspection.
    Attention

  • Please use this product according to its specifications otherwise there may be malfunction.

  • Use light fixtures that have not been certified or are not compatible with the LED drivers may cause fire or other hazards.

  • Man-made damage, any use beyond the specification and non-original-factory modification are not covered by warranty.
    Remark: The final interpretation right of the contents of this data sheet belongs to Lifud Technology Co., Ltd.

www.lifud.com Service Hotline: +86 755 8373 9299

LF-GIF020YFIIxxxxH EU-Standard Flicker-free Built-in Track Light LED Driver

References

• Lifud Technology Co., Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>