EXCEL AE609-RK IONE Knob Risis Tranquility Instruction Manual
- June 10, 2024
- EXCEL
Table of Contents
EXCEL AE609-RK IONE Knob Risis Tranquility
Product Information
The AE609-RK – IONE – Knob Risis Tranquility is an antique cabinet knob made of zinc alloy material with an antique bronze finish. The knob has a solid style with a diameter of 26mm and a depth of 28mm. It has a single-hole drilled hole diameter of 5mm and is suitable for door thickness between 16-21mm. Each knob is individually bagged to prevent damage to the finish and comes with 1 installation screw.
Product Usage Instructions
- First, determine the location where you want to install the knob.
- Using a measuring tape or ruler, mark the center point for the single-hole drilled hole diameter of 5mm.
- Drill the hole at the center point using a drill bit of the appropriate size.
- Insert the installation screw through the back of the knob and into the drilled hole.
- Tighten the screw until the knob is securely attached to the door.
Note: Make sure that the knob is properly aligned and level before tightening the screw. The center-to-center measurement between the screw holes should be equal to the C.C. measurement provided in the specifications section of the manual. The knob is suitable for door thickness between 16-21mm.
Specifications
- Material: Zinc Alloy
- Finish: Antique Bronze
- Type: Antique Cabinet Knob
- Style: Solid
Product Dimensions
- Depth: 28 mm
- Diameter: 26 mm
- C.C.: Single-hole
- Drilled hole diameter: 5 mm
- Package quantity: 1 piece
EXCEL – Antique Ornamental Cabinet Knob Care Instructions
- Wipe clean with a cloth dampened in a mild cleaner.
- Wipe dry with a clean cloth.
- Do not scrub the product surface with acidic or corrosive liquid.
- Do not change the product pitch, in order to avoid unnecessary damage.
- Please use the product load to avoid the loss of super-negative results is not necessary.
- Store in a dry location, do not pile up in damp, cold places, to avoid rusting or oxidation.
Product Advantages
- Classical appearance design of the pull handles would be very popular.
- The pull handles can help you create a stylish and complete look.
- Made of classical design, the draw pull handles are for a long time use.
- The drawer pull handles are comfortable for you to hold.
- Fine workmanship of the pull handles makes sure the handles are perfect for your using.
- This pull handle is perfect for your shoe cabinet, bookcase, drawer and so on.
Good to know
Each pull is individually bagged to prevent damage to the finish. 1” X 1 pcs
installation screw is included. C to C is the center-to-center measurement
between the screw holes. Suitable for door thickness 16-21 mm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>