HDTV SUPPLY DVDO-RS-3 HDBaseT Room Solution User Manual
- October 30, 2023
- HDTV Supply
Table of Contents
HDTV SUPPLY DVDO-RS-3 HDBaseT Room Solution
Introduction
The DVDO-RS-3 HDBaseT extender allows for the transmission of video resolutions up to 4K2K @60Hz(YUV 4:4:4) and HD audio, along with dedicated USB pathways, 2-Way IR, RS-232, and POC signals up to 131ft/40m for 4K2K@60Hz(4:4:4) or up to 230ft/70m for 1080p60Hz through a single Cat6/6a cable. The USB KVM function enables USB transmission from the receiver to the transmitter. Using the latest HDBaseT 2.0 technology, the DVDO-RS-3 can make your home or office set-up more efficient and easy to use.
Features
- Transmission of video resolutions up to 4K2K @60Hz(YUV 4:4:4)
- HD audio transmission
- Dedicated USB pathways
- 2-Way IR
- RS-232
- POC signals up to 131ft/40m for 4K2K@60Hz(4:4:4) or up to 230ft/70m for 1080p60Hz through a single Cat6/6a cable
- USB KVM function for USB transmission from the receiver to the transmitter
- HDBaseT 2.0 technology
Instructions for Use
- Read all instructions carefully before connecting, operating, or adjusting the DVDO-RS-3.
- For optimum performance and safety, use surge protection systems to protect the sensitive electrical components from damage due to electrical spikes, surges, electric shock, lightning strikes, etc.
- Connect the DVDO-RS-3 to a power source using the included power adapter.
- Connect the transmitter and receiver using a single Cat6/6a cable.
- Connect the input source to the transmitter using an HDMI cable.
- Connect the output display to the receiver using an HDMI cable.
- Connect any USB devices to the transmitter or receiver using USB cables.
- Use the 2-way IR or RS-232 for remote control of the connected devices.
- Refer to the table of contents in the user manual for information on the front panel, rear panel, and bottom panel of the DVDO-RS-3.
- Refer to the application examples in the user manual for guidance on how to use the DVDO-RS-3 in your home or office set-up.
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shook, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
The HDBaseT extender enables transmission of video resolutions up to 4K2K
@60Hz(YUV 4:4:4), along with HD audio, dedicated USB pathways, 2-Way IR,
RS-232, POC signals up to 131ft/40m for 4K2K@60Hz(4:4:4) or up to 230ft/70m
for 1080p60Hz through a single Cat6/6a cable. USB KVM function enables the USB
transmission from the receiver to the transmitter. Using the latest HDBaseT
2.0 technology, DVDO-RS-3 can make your home or office set-up more efficient
and easy to use.
Features
- HDMI 2.0b, HDCP 2.2 and HDCP 1.4 compliant
- Video resolutions up to 4K2K@60Hz(4:4:4), 4K2K@30Hz, 1080p@120Hz
- HDBaseT™ 2.0 over a single CAT6/6a cable up to 131ft/40m distance for 4K2K@60Hz(4:4:4) or up to 230ft/70m distance for 1080p60Hz
- 5-Play™ convergence: HD video & audio, IR/RS-232/POC
- Audio up to 7.1 channels of High Definition audio pass through (LPCM, Dolby True HD, and DTS-HD Master Audio)
- USB, CEC, RS-232 and two-way IR
- 24V POC (optional)
Package Contents
- CD 1 X HDBaseT extender Receiver
- ® 1 X User Manual
- @ 1 X Wideband I Blaster cable
- © 1 X Wideband IRReceiver cable
- @ 2 X Mounting ears
- @ 1 X 3-pin male Phoenix terminal
- < i> 1 X 24V/1A Locking Power adaptor
Specifications
Technical
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 1.4 and HDCP 2.2
Video Bandwidth| 18Gbps
Video Resolution| up to 4K2K@S0/60Hz(YUV4:4:4),4K2K@30Hz,
1080P@120Hz, and 1080P 3D@60Hz
Color Space| RGB/YCbCr 4:4:4, YCbCr 4:2:2
Color Depth| 10-bit, 12-bit
HDMI Audio Formats| LPCM 2/5.1/7.lCH, Dolby Digital, DTS 5.1, Dolby Digital+,
Dolby TrueHD, DTS-HD Master Audio,
Dolby Atmos, DTS:X
ESD Protection| Human body mode l – + SkV (Air-gap discharge) & +
4 kV (Contact discharge)
Connections
Receiver| Inputs: lx IRINPUT [3.5mm Stereo Mini-jack] lx RS-232
[Phoenix jack] lx HDBaseT IN [RJ45] 2xUSB [USB Type A] lx SERVICE [Micro USB]
Outputs: lx HDMI Type A [19-pin female] lx IR OUTPUT [Phoenix jack]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 172mm [W] x 97.5mm [D] x 20mm [H]
Weight| 420g
Power Supply| Input: ACl00 – 240V 50/G0Hz, Output: DC 24V/1A
(US/EU standards, CE/FCC/UL certified)
Power Consumption| 7.SW
Operating| 32 – 104° F / 0 – 40° C
Temperature|
---|---
Storage
Temperature| -4 – 140° F / -20- 60° C
Relative Humidity| 20 – 90% RH (no condensation)
Operation Controls and Functions
Front panel and Rear panel
| Number | Name | Function description |
|---|---|---|
| 1 | POWER LED | This indicator LED will illuminate when the unit is |
power on.
2| SERVICE| For firmware update.
3| DC24V| Plug the 24V/1A adaptor to AC wall outlet for
power supply.
4| HDBaseT IN| HDBaseT input port. Connect HDBaseT Transmitter with a UTP
cable.
5| IRIN| Connect to IR Receiver cable.
6| IROUT| Connect to IR Blaster cable.
7| HDMI OUT| Connect to a HDMI display device such as TV or
projector.
8| USB port| Connect to USB device such as USB mouse or keyboard.
9| RS-232| Use the phoenix jack for connect PC or control
system to transmit RS-232 commands.
Bottom Panel
| Number | Name | Function description |
|---|---|---|
| 1 | Dial switch | When the switch is dialed to number “1” , the SERVICE port |
will update internal MCU firmware. The switch is dialed to number “0” , the
SERVICE
port will update HDBaseT firmware.
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>