HDTV SUPPLY KVM Workstation User Guide
- October 30, 2023
- HDTV Supply
Table of Contents
HDTV SUPPLY KVM Workstation
The KVM workstation is a tool used to control multiple input sources on a single monitor. It supports a workstation with one monitor and can be operated using hotkeys and input source previews.
Usage Instructions
- Triple press the Ctrl key to show the login interface.
- Login with the specific user name and password.
- After login, the input sources preview will be displayed on the top bar.
- Operators can drag any sources down to the down section to view or double-click the sources to control it. To control the sources, ensure that it is a PC with the USB cable connected.
- Use hotkeys to switch the input sources seamlessly to this monitor:
- Double click source 1: Ctrl+1
- Double click source 2: Ctrl+2
- To enter the Video Wall control, triple click Alt key. There are two modes available – Free window mode and Full-screen on whole video wall mode.
KVM Workstation Operation Guide
As long as the users have the KVM workstation setup in the system, it can support the KVM workstation, below take example as a workstation with one monitor:
Triple press the “Ctrl” key, it will show the login interface, and login with the specific user name and password:
After login, it will should be below interface, have the input sources preview on the top bar:
Operators can simply drag any sources down to the down section to view:
or just double click the sources to control it(* to control the sources will need to make sure it’s a PC with the USB cable connected); And now operators can use the hot-key to switch the inputs sources seamless to this monitor:
- Double click the source 1(hot-key: Ctrl+1)
- Double click the source 2(hot-key: Ctrl+2)
Triple click “Alt” key to enter the Video Wall control:
Free window mode:
Full-screen on whole video wall mode:
Other functions on the other keys:
- Esc: Exit the KVM or video wall mode(when show the preview bar on the top)
- Home: Back to login interface
Input sources tab/mode:
- Tab: select input signal groups
- Up/Down: Select the current sources from the signal group(no cycling)
- PGUP/PGDN: When signal above 1 page, to switch the signals
- LEFT/RIGHT: Select the local workstation monitor(cycling)
- F1~F8: Fast select the local workstation
Video Wall tab/mode:
- UP/DOWM: select the video wall(no cycling)
- PGUP/PGDN: When video wall above 1 page, to switch the video wall
- LEFT/RIGHT: Select the local workstation monitor(cycling)
- F1~F8: Fast select the local workstation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>