HDTV SUPPLY V2021.001 4K 60Hz 1×4 HDMI Splitter With EDID User Manual

HDTV SUPPLY V2021.001 4K 60Hz 1×4 HDMI Splitter With EDID

Product Information

The 4K 60 Hz 1×4 HDMI Splitter with EDID is a high-performance device that can split one HDMI input into four HDMI outputs simultaneously. It has a video bandwidth of 10.2 Gbps and supports video resolutions up to 4K2K@50/60Hz YCbCr 4:2:0. The splitter is HDCP1.4 compliant and supports 3D, HDR, and Dolby Vision function. It comes with STD and TV modes and EDID settings that can be selected using the switch on the panel. The splitter has no need for driver installation as it is plug-and-play.

Features

• HDCP1.4 compliant
• Support video bandwidth 10.2 Gbps
• Video resolution is up to 4K2K@50/60Hz YCbCr 4:2:0
• Support 3D, HDR, and Dolby Vision function
• EDID can be selected with STD and TV modes by the switch on the panel
• No need to install the driver, plug and play

Specification

• HDCP Compliance: HDCP 1.4
• Video Bandwidth: 10.2Gbps
• Resolution: 4K2K 50/60Hz 4:2:0, 4K2K 30Hz 4:4:4, 1080p, 1080i, 720p, 720i, 480p, 480i All HDMI 3D TV formats All PC resolutions including 1920 x 1200
• 3D Support: Yes
• Color Space: RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
• Color Depth: 8/10/12-bit
• Audio Formats: PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
• HDR Formats: HDR10, HDR10+, Dolby Vision
• ESD Protection: Human-body Model
• Connection Input Ports: 1’HDMI Type A [19-pin female], 1’SERVICE port [5-pin, Mini USB-B]
• Output Ports: 4’HDMI Type A [19-pin female]
• Mechanical Housing Color: Black
• Dimensions: N/A
• Weight: N/A
• Power Supply: DC 5V 1A power supply
• Power Consumption: N/A
• Operating Temperature: N/A
• Relative Humidity: 20~90% RH (non-condensing)
• Cable Length: For 4K60 (YCbCr 4:2:0)- –32ft / 10M; For 1080P—40ft/ 15m

Product Usage Instructions

1. Ensure that the device is grounded well before powering it on to protect the device and operating personnel from electrostatic discharge.
2. Connect the HDMI input source to the HDMI IN port of the splitter using an HDMI cable.
3. Connect the HDMI output devices to the HDMI OUT ports of the splitter using HDMI cables.
4. Select the EDID mode using the switch on the panel, either STD or TV mode.
   • STD mode: All HDMI OUT ports output default 1080P@60Hz-2ch
   • TV mode: Copy HDMI OUT 1 port EDID setting to all outputs. If no HDMI OUT 1 capable EDID is detected then the device will output default 1080P@60Hz-2ch.
5. Connect the DC 5V 1A power supply to the splitter and a power outlet.
6. The splitter is now ready to use. No driver installation is needed as it is plug-and-play.

Safety Reminder

To protect the device and operating personnel from electrostatic discharge, you need to check and ensure that the device is grounding well before the device is powered on. Please observe the following when you install, use, and maintain this equipment.

Make sure the device ground connection.

Disposal Instruction (US)
For better protection of our earth, please don’t throw this electronic device into municipal trash bin when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle the product. For more information about the collection and recycling of Waste Electrical and Electronic Equipment (WEEE), please contact your local dealers.

Safety Instructions

1. Please read these safety instructions carefully.
2. Please keep this User Manual for later reference.
3. Please disconnect this equipment from connecter before cleaning. Don’t use liquid or prayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
4. Make sure the equipment is connected to the power source with the correct voltage, frequency, and ampere.
5. All cautions and warnings on the equipment should be noted.
6. Never pour any liquid into opening, this could cause fire or electrical shock.
7. Never open the equipment. For safety reason, the equipment should only be opened by qualified service personnel.
8. If one of the following situations arises, get the equipment checked by a service personnel :
   • Liquid has penetrated into the equipment.
   • The equipment has been exposed to moisture.
   • The equipment has not work well or you can not get it work according to user’s manual.
   • The equipment has dropped and damaged.
   • If the equipment has obvious sign of breakage.
9. Ambient operation temperature: 0 ~ 45 degrees.
10. Risk of overheating! Don ’ t put operating/installing equipment inside too closed space, be sure the installation space at least 1 to 2 inches or 2 to 5 cm of space for ventilation. To ensure that other objects do not cover the equipment.

Notice: Peripheral devices Only peripherals (input/output devices, terminals,player, etc.) certified to comply with Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Caution
Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this equipment.

Introduction

WolfPack high performance 10.2Gbps 1×4 HDMI Splitter can split 1 HDMI input to 4 HDMI outputs simultaneously. The resolution is up to 4Kx2K@50/60Hz YCbCr 4:2:0. HDR and Dolby Vision function are available. In addition, this splitter supports STD and TV modes EDID settings.

Features

• HDCP1.4 compliant
• Support video bandwidth 10.2 Gbps
• Video resolution is up to 4K2K@50/60Hz YCbCr 4:2:0
• Support 3D, HDR, Dolby Vision function
• EDID can be selected with STD and TV modes by the switch on panel
• STD: Output default 1080P@60Hz-2ch
• TV: Copy HDMI OUT 1 port EDID setting to all outputs. If no HDMI OUT 1 capable EDID is detected, then the unit will output default 1080P@60Hz-2ch.
• No need to install the driver, plug and play

Specification

Technical|
---|---
HDCP Compliance| HDCP 1.4
Video Bandwidth| 10.2Gbps

Resolution

| 4K2K 50/60Hz 4:2:0, 4K2K 30Hz 4:4:4, 1080p, 1080i, 720p, 720i, 480p, 480i

All HDMI 3D TV formats

All PC resolutions including 1920 x 1200

3D Support| Yes
Color Space| RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8/10/12-bit
HDMI             Audio

Formats

| PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True  HD, DTS, DTS- EX,DTS-96/24, DTS High Res

DTS-HD Master Audio, DSD

HDR Formats| HDR10, HDR10+, Dolby Vision
ESD Protection| Human-body Model:
Connection
Input Ports| 1’HDMI Type A [19-pin female] 1’SERVICE port [5-pin, Mini USB-B]
Output Ports| 4’HDMI Type A [19-pin female]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 163mm(W)’63mm(D)x16mm(H)
Weight| 260g
Power Supply| Input: AC 100~240V 50/60Hz
Power Consumption| 1W (max)
Operating| 0°C ~ 40°C / 32°F ~ 104°F
Storage| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Cable Length| For 4K60 (YCbCr 4:2:0)- –32ft / 10M; For 1080P—40ft/ 15m

Packing

Panels

Front Panel

• Power: Red LED indicates that the device is powered on
• IN: HDMI input indicator
• OUT 1/2/3/4: HDMI outputs indicators
• SERVICE: For the firmware upgrading
• EDID STD: All HDMI OUT ports output default 1080P@60Hz-2ch
• EDID TV: Copy HDMI OUT 1 port EDID setting to all outputs. If no HDMI OUT 1 capable EDID is detected then the device will output default 1080P@60Hz-2ch.

Back Panel

• HDMI OUT 1/2/3/4: Four HDMI output ports
• HDMI IN: One HDMI input port
• DC 5V: DC 5V 1A power supply

Operation diagram

After-Sales

Warranty Information
The Company warrants that the process and materials of the product are not defective under normal use and service for 2 (2) years following the date of purchase from the Company or its authorized distributors. If the product does not work within the guaranteed warranty period, the company will choose and pay for the repair of the defective product or component, the delivery of the equivalent product or component to the user for replacement of the defective item, or refund the payment which users have made. The replaced product will become the property of the Company. The replacement product could be new or repaired. Whichever is longer, any replacement or repair of the product or component is for a period of ninety (90) days or the remaining period of the initial warranty. The Company shall not be responsible for any software, firmware, information, or memory data contained in, stored in, or integrated with the product repaired by the customer’s return, whether or not during the warranty period.

Warranty limitations and exceptions
Except above limited warranty, if the product is damaged by over usage, incorrect use, ignore, accident, unusual physical pressure or voltage, unauthorized modification, alteration or services rendered by someone other than the Company or its authorized agent, the company will not have to bear additional obligations. Except using the product properly in the proper application or normal usage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>