HDTV SUPPLY HDTV-CAT6 HDMI Extender with IR Control User Manual

: October 30, 2023
: HDTV Supply

Table of Contents

HDTV SUPPLY HDTV-CAT6 HDMI Extender with IR Control
Introduction
Features
Package Contents
Specifications
Operation Controls and Functions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HDTV SUPPLY HDTV-CAT6 HDMI Extender with IR Control

VER 1.0
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shook, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Introduction

The HDMI Extender (70m) with IR Control is a device that allows you to extend HDMI signals up to 70 meters via a single CAT6/5E cable. It is HDMI 1.4 and HDCP 1.4 compliant, and supports video resolution up to 4K@30Hz. It also supports copying EDID from receiver display or loop out display, and allows for cascading via additional HDMI loop out port.

Features

HDMI 1.4 and HDCP 1.4 compliant
Support video resolution up to 4K@30Hz

The maximum transmission distance via a single CAT6/5E cable is as follows:

*  **CAT6:** 230ft/70m for 1080p, 131ft/40m for 4K30

CAT5E: 197ft/60m for 1080p, 115ft/35m for 4K30

Support copying EDID from receiver display or loop out display
Allow for cascading via additional HDMI loop out port
Compact design for easy and flexible installation

Package Contents

Transmitter x1
Receiver x1
IR Extender Cable x2
Power Adaptor x2
User Manual x1

Specifications

Technical

ESD Protection

| Human Body model:

+/- 8 kV (air-gap discharge)

+/- 4 kV (contact discharge)

Connection

Transmitter

| Input: 1 x HDMI Type A [19-pin female] Outputs:1 x HDMI Type A [19-pin female]

1 x IR OUT [3.5mm Stereo Mini-jack]

1 x CAT OUT [RJ45, 8-pin female]

Receiver

| Inputs: 1x IR IN [3.5mm Stereo Mini-jack] 1x CAT IN [RJ45, 8-pin female]

Output: 1x HDMI Type A [19-pin female]

Operation Controls and Functions

HDTV-SUPPLY-HDTV-CAT6-HDMI-Extender-with-IR-Control-
FIG-1

Transmitter Panel

No.	Name	Function Description
1	HDMI IN	HDMI signal input port. Connect to HDMI source device such as DVD

or Set-top box.

2

| ****

EDID

DIP switch

| The switch is used for selecting EDID: Switch to the right position, the extender will copy HDMI loop out display EDID information to signal source; Switch to the left position, the extender will copy Receiver display EDID

to signal source.

3| HDMI OUT| HDMI signal loop out port. Connect to HDMI display device such as HDTV.
4| IR OUT| Connect to IR blaster cable, the IR signal is

from the IR IN port of the receiver.

5| Power LED| When the transmitter is powered on, the LED will be on.
6| CAT| CAT output port. Connect to the CAT input

port of the receiver with CAT5E/6 cable.

7| Link LED| When the transmitter is connected to HDMI source, the LED will be on.
---|---|---
8| DC 5V| DC 5V power supply port.

Receiver Panel

HDTV-SUPPLY-HDTV-CAT6-HDMI-Extender-with-IR-Control-
FIG-2

No.	Name	Function Description
1	HDMI OUT	HDMI signal output port. Connect to HDMI display device such as

HDTV.
2| IR IN| Connect to IR receiver cable, the IR signal

will emit to the IR OUT port of the transmitter.

3| Power LED| When the receiver is powered on, the LED will be on.
4| CAT| CAT input port. Connect to the CAT output

port of the transmitter with CAT5E/6 cable.

5| Link LED| When the receiver is connected to HDMI source, the LED will be on.
6| DC 5V| DC 5V power supply port.

IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:

Application Example The terms HDMI and HDMI High- Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.