NTI ENVIROMUX Series E-CO2-LC Carbon Dioxide Sensor Instruction Manual
- October 30, 2023
- NTI
Table of Contents
NTI ENVIROMUX Series E-CO2-LC Carbon Dioxide Sensor
The E-CO2-LC carbon dioxide sensor is designed for installation and operation in industrial settings. It uses a new type of infrared verification technology for CO2 concentration measurement, which provides a rapid and sensitive response. The sensor comes with an ABS waterproof shell and supports 0-5VDC output. It is intended for wall-mounted use in applications such as greenhouses, industrial waste gas monitoring, and farming monitoring.
product Materials
The materials supplied with this kit include:
- NTI ENVIROMUX E-CO2-LC Carbon Dioxide Sensor
- 110-240VAC, 50 or 60Hz-12VDC/1A AC Adapter With Country-specific line cord
- Wall Mount Hardware
- 2- WC-UY2 Butt Splices
- URL Slip with path to ENVIROMUX sensor manuals
Materials not supplied but required:
- ENVIROMUX E-S5VDC 0-5VDC Sensor Converter (Sold separately)
product Wiring
| Purpose | Power Supply | CO2 Signal |
|---|---|---|
| Color | Brown | Black |
| Signal | Power- Positive | Power-Negative |
product Technical Specifications
- Detection Range
- Accuracy
- Stability
- Non-linearity
- Response time
- Data update time
- System warm-up time
- Power Current Draw
- Output Signal
- Operating Temperature
- Operating Relative Humidity
- Enclosure Material
- Size WxDxH
- Approvals
Product Usage Instructions
- Mount the E-CO2-LC carbon dioxide sensor on the wall using the supplied wall mount hardware.
- If the ENVIROMUX E-S5VDC 0-5VDC Sensor Converter is not already installed, purchase and install it as per its instructions.
- Wire the sensor to the power supply and CO2 signal as per the wiring diagram above.
- Ensure that the system is warmed up before taking CO2 concentration measurements.
- The sensor provides a 0-5VDC output signal that can be used to display CO2 concentration readings.
- The sensor is suitable for use in greenhouses, industrial waste gas monitoring, farming monitoring, etc.
TRADEMARK
ENVIROMUX and the NTI logo are registered trademarks of Network Technologies
Inc in the U.S. and other countries. All other brand names and trademarks or
registered trademarks are the property of their respective owners.
COPYRIGHT
Copyright © 2022 by Network Technologies Inc. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written consent of
Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.
CHANGES
The material in this guide is for information only and is subject to change
without notice. Network Technologies Inc reserves the right to make changes in
the product design without reservation and without notification to its users.
INTRODUCTION
E-CO2-LC carbon dioxide sensor adopts a new type of infrared verification technology for CO2 concentration measurement, and the response rapid and sensitive. This carbon dioxide sensor includes an ABS waterproof shell. It is a professional industrial CO2 sensor and supports 0-5VDC output. This is a wall-mounted CO2 sensor that can be used in greenhouses, industrial waste gas monitoring, farming monitoring, etc.
Features:
- Measures CO2 in a range of 0 to 5,000 ppm.
- Accuracy: ±(3% of reading + 50ppm) at 77°F (25°C)
- Sensing element: Single Beam Non-Dispersive Infrared (NDIR)
- 0 to 5 VDC output.
- Includes 12V/1A power supply.
- Current consumption: 60mA @ 12VDC.
- Weatherproof enclosure.
- IP65-rated water and dust protection.
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Operating relative humidity: 0 to 80% non-condensing RH.
- Regulatory approvals: CE
- Requires the E-S5VDC sensor converter to operate with E-2D/5D/16D.
- E-S5VDC maximum cable length: 1000 ft (305 m).
- E-S5VDC powered by E-2D/5D/16D.
MATERIALS
Materials supplied with this kit:
- NTI ENVIROMUX E-CO2-LC Carbon Dioxide Sensor
- 110-240VAC, 50 or 60Hz-12VDC/1A AC Adapter With Country-specific line cord
- Wall Mount Hardware
- 2- WC-UY2 Butt Splices
- URL Slip with path to ENVIROMUX sensor manuals
Materials Not supplied but REQUIRED:
ENVIROMUX E-S5VDC 0-5VDC Sensor Converter (Sold separately)
WIRING
Purpose Color Signal
Power Supply| Brown| Power- Positive
Black| Power-Negative
CO2 Signal
| Blue| Signal- Positive
Green| Signal- Negative
TECHNICAL SPECIFICATIONS
Detection Range| 0-5000 ppm
Accuracy| ±50ppm+3% Full scale) at 25℃
Stability| <2%F-S
Non-linearity| <1%F-S
Response time| 90% step change is generally less than 90S
Data update time| 2s
System warm-up time| 2 minutes (ready to function/; 10 minutes (maximum
accuracy)
Power| 10 to 30VDC (110-240VAC, 50 or 60Hz-12VDC/1A AC Adapter supplied)
Current Draw| 60mA (@12VDC)
Output Signal| 0-5VDC
Operating Temperature| -10˚ to 50˚C
Operating Relative Humidity| 0 to 80% RH non-condensing
Enclosure Material| ABS Plastic, IP65
Size WxDxH| 4.33×1.73×3.35 in. (110x44x85mm)
Approvals| CE
Note: This sensor will provide an indication of the presence of carbon dioxide in an ENVIROMUX Enterprise Environment Monitoring System (E-16D/-5D/-2D) when connected through an E-S5VDC sensor converter.
WARRANTY INFORMATION
The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.networktechinc.com for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.
MAN426 Rev. 10/04/22
1275 Danner Dr
- Tel:330-562-7070
- Aurora, OH 44202
- Fax:330-562-1999
- www.networktechinc.com
References
- NTI Network Technologies Inc Environment Monitoring HDMI Extender
- NTI Network Technologies Inc Environment Monitoring HDMI Extender
- 4-20mA 5VDC Sensor Converter RJ45 Screw Terminal 24VDC ISA Type
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>