Anritsu Company 2000-2074-R Extended Power Pack User Guide
- October 30, 2023
- Anritsu Company
Table of Contents
Anritsu Company 2000-2074-R Extended Power Pack
Product Information
The Extended Power Pack 2000-2074-R is a rechargeable battery bank that provides DC power to the instrument. It has a front panel with a powered button/voltage selector, battery and voltage indicator, DC in/out port, USB A ports (2), USB C port, USB C cable to charging source, and DC-DC barrel connector cable to instrument. The USB Type A and Type C ports can be used to recharge the extended power pack using an AC-DC USB adapter. The voltage output of the power pack can be adjusted to 12 V, 16 V, 19 V, or 24 V, but it is recommended to set it to 16 VDC before making any connections to the instrument.
Product Usage Instructions
Charging the Instrument: To charge the instrument, connect it with the extended power pack using the DC-DC barrel connector cable.
Recharging the Extended Power Pack: The extended power pack can be recharged using an AC-DC USB adapter connected to either the USB Type A or Type C ports.
Setting the Voltage: To set the voltage to 16 VDC, follow these steps:
- Press and hold the powered button for two seconds and release. Each of the four voltage indicator LEDs will sequence through during power on. If the four LEDs do not light, the battery is not fully charged and will need to be charged before continuing.
- Double-press the power button to set to DC output mode.
- Single-press the power button to sequence through each voltage setting until it reaches 16 VDC.
- Set to the 16 VDC position as shown on the front panel. The voltage output is now set to 16 VDC and the power pack can be safely connected to the instrument’s DC power input jack.
Caution: Do not adjust the DC output voltage when the DC cable is connected to the instrument. Damage to the instrument’s internal circuitry may result if incorrect DC power is applied.
Caution
- Do not adjust the DC output voltage when the DC cable is connected to the instrument. Set the output to 16 VDC before making any connections.
- Damage to the instrument’s internal circuitry may result if incorrect DC power is applied.
Overview
The extended power pack front panel and contents are shown below. To charge the instrument connect the instrument with extended power pack using DC-DC barrel connector cable. USB Type A and Type C ports can be used to recharge the extended power pack using an AC-DC USB adapter.
- Powered Button/Voltage Selector
- Battery and Voltage Indicator
- DC In/Out Port
- USB A Ports (2) (Do not connect to instrument USB ports)
- USB C Port (Do not connect to instrument USB port)
- USB C Cable to Charging Source
- DC-DC Barrel Connector Cable to Instrument (Adjust voltage before connecting to instrument as described in the next section.)
Setting the Voltage
The rechargeable battery bank provides DC power to the instrument. Set the voltage to 16 VDC BEFORE making any connections to the instrument.
Caution
- Do not adjust the DC output voltage when the DC cable is connected to the instrument. Set the output to 16 VDC before making any connections.
- Damage to the instrument’s internal circuitry may result if incorrect DC power is applied.
To set to 16 VDC
- Press and hold the power button for two seconds and release. Each of the four voltage indicator LEDs sequence through during power on. If the four LEDs do not light, the battery is not fully charged and will need to be charged before continuing.
- Set to DC output mode by double-pressing the power button.
- In DC output mode, set to 16 VDC by single-pressing the power button to sequence through each voltage setting.
- Set to the 16 VDC position as shown below. The voltage output is now set to 16 VDC and the power pack can be safely connected to the instruments DC power input jack.
Anritsu utilizes recycled paper and environmentally conscious inks and toner.
Anritsu Company
- 490 Jarvis Drive
- Morgan Hill, CA 95037-2809 USA
- http://www.anritsu.com
Part Number: 10580-00494
Revision: A
Published: November 2022
Copyright 2022 Anritsu Company, USA. All Rights Reserved.