OLIGHT Haloop 600 Lumen Umbrella Light User Manual
- June 10, 2024
- OLIGHT
Table of Contents
OLIGHT Haloop 600 Lumen Umbrella Light
Product Information
The Olight Product is a portable LED light that comes with a Haloop, USB-C Charging Cable, Binding Strap, and Binding Strap Adapter. It has a white light mode and an orange light mode with different lumen outputs and runtimes. The product is designed with a hanging hook, rotary knob switch, logo buckle indicator, USB-C port dust plug, steel guard, anti-slip mat, white light LED, and orange light LED. The product has a battery level indicator that displays the remaining battery level when charging and discharging. The product also comes with a fixing accessory installation guide.
Product Usage Instructions
- Before the first use, fully charge the product by connecting one end of the provided USB-C cable to an external USB-C power source and inserting the other end of the cable into the USB-C charging port of the product.
- To turn on the light, rotate the rotary knob clockwise and turn off by rotating counter-clockwise.
- To change the light output, keep rotating the rotary knob clockwise for stepless adjustment of the light output in the following order: low orange light, high orange light, low warm white light, and high warm white light. Rotating the rotary knob counter-clockwise will change the light output in reverse order.
- When charging, the battery-icon indicator displays the remaining battery level as follows: 100%, 75%-100%, 50%-75%, 25%-50%, and 0%-25%.
- When discharging, the battery-icon indicator displays the remaining battery level as follows: 75%-100%, 50%-75%, 25%-50%, 5%-25%, and 0%-5%.
- When rotating the rotary knob switch, the battery-icon indicator turns on (automatically turns off after 5 seconds), and the battery-icon indicator displays the remaining battery level as follows: 75%-100%, 50%-75%, 25%-50%, 5%-25%, and 0%-5%.
- For fixing accessory installation, pass the two attachment straps through the holes on the top of the adapter, affix the adapter to the hub of the hanging umbrella using its strap, hold down the logo buckle and pull the lamp body outwards, close the lamp body around the installed adapter, and ensure the latch is secure.
Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!
IN THE BOX
SPECIFICATIONS
White Light Mode
Orange Light Mode
All above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed indoors under a room temperature of 25 degrees celsius with windless conditions. The runtime may vary depending on the external temperature and ventilation conditions, and these biases may affect the results of testing.
PRODUCT OVERVIEW
CHARGING
Before first use, please fully charge the product. Connect one end of the
provided USB-C cable to an external USB-C power source (power adapter not
included), open the silicone dust plug that shields the USB-C charging port of
the product, and then insert the other end of the cable into the USB-C
charging port.
NOTE : Best charging efficiency with an 18W or higher-capacity power
source.
BATTERY LEVEL INDICATOR
- When charging, the battery-icon indicator displays the remaining battery level.
- When discharging, the battery-icon indicator displays the remaining battery level.
- When rotating the rotary knob switch, the battery-icon indicator turns on (automatically turns off after 5 seconds), and the battery-icon indicator displays the remaining battery level.
FIXING THE ACCESSORY INSTALLATION GUIDE
- Pass the two attachment straps through the holes on the top of the adapter.
- Affix the adapter to the hub of the hanging umbrella using its strap.
- Hold down the LOGO buckle and pull the lamp body outwards.
- Close the lamp body around the installed adapter and ensure the latch is secure.
DANGER
DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
WARNING
- DO NOT store the product in a car or any place where the temperature may exceed 60°.
- When the charging port is not in use, please keep the dust plug inserted to prevent dust or foreign matters from entering.
- DO NOT place the product in any dusty environment. Otherwise, the dust may enter the rotary knob switch and cause it to malfunction.
- DO NOT disassemble the product.
- DO NOT immerse the product in seawater or other corrosive media to avoid damage to the product.
- Please prevent it from falling and handle it with care.
- Please DO NOT try to open the spring clamp wider than the allowed range. Otherwise, the product may suffer irreversible damage.
NOTICE
- Please keep the product away from radios, as the PWM modulation of the rotary knob may cause noise to the radio signals.
- Please fully charge the battery before storing the product for a long period of time.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual.
HOW TO OPERATE
ON/OFF: Turn on by rotating the rotary knob clockwise and turn off by rotating
counter-clockwise.
Change Light Output: When the light is on, keep rotating the rotary knob
clockwise for the step-less adjustment of the light output in the following
order: low orange light, high orange light, low warm white light, and high
warm white light. Rotating the rotary knob counter-clockwise will change the
light output in the reverse order.
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an Authorized retailer or Olight itself.
USA Customer Support
cs@olightstore.com
Global Customer Support
customer-service@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town,
Dongguan City, Guangdong, China.
Made in China