unitech MS340 Barcode Scanner User Guide

June 10, 2024
unitech

unitech MS340 Barcode Scanner

unitech MS340 Barcode Scanner product

Product Information: MS340 Barcode Scanner

The MS340 is a high-performance barcode scanner that can be used to scan various types of barcodes. It has a USB interface and can be connected to a host PC. The scanner comes with a Quick Start Guide that provides step-by-step instructions on how to install and use the scanner.

Step 1: Getting Started (For USB Cable)

To install the scanner to the host system, follow these steps:

  1. Connect the USB cable of MS340 to the USB port on your host PC.
  2. After six beeps, MS340 is successfully connected with your host PC, then the driver will be started to install automatically.
  3. Please go to step 2: Test & Finish.
Step 2: Test & Finish

To test and finish the installation process, follow these steps:

  1. Scan the following barcode.
  2. If the word unitech appears on your screen, the scanner has been successfully installed.
  3. Set All Defaults.
Tips for Switching Cable

Before removing the cable from the scanner, it is recommended that the power on the host system is off and the power supply has been disconnected from unit. To switch the cable, follow these steps:

  1. Find the small Pin-hole on the bottom of the unit.
  2. Use a bended regular paperclip and insert the tip into the hole.
  3. You will hear a click, then gentle on the strain-relief of the cable and it will slide out of the scanner.unitech MS340 Barcode Scanner 3

Configuration Flow Chart

To configure the scanner, follow the steps in the configuration flow chart. The configuration flow chart includes barcode scans for interface selection, reading mode selection, terminator selection, RS232 mode parameters, and language selection.
The function can be executed directly by scanning barcode instead of following the configuration flow chart process. For more detailed scanner setting, please go to www.ute.com to download the user manual and the scanner configuration manager utility.unitech MS340 Barcode Scanner
4

Interface Selection

unitech MS340 Barcode Scanner 5

Reading Mode Selection

unitech MS340 Barcode Scanner 6

Select Terminator

unitech MS340 Barcode Scanner 7

RS232 Mode Parameters : Set Up BAUD Rate

unitech MS340 Barcode Scanner 8

Language Selection

unitech MS340 Barcode Scanner 9

* : Default Option*
* :Quick Setting Label**
The function can be executed directly by scanning barcode instead of following the configuration flow chart process.
For more detailed scanner setting, please go to www.ute.com to download the user manual and the scanner configuration manager utility.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals