KOHLER Hyten K-25876 Elevated Quiet-Close Round Front Toilet Seat Owner’s Manual
- June 10, 2024
- Kohler
Table of Contents
KOHLER Hyten K-25876 Elevated Quiet-Close Round Front Toilet Seat
Product Information
The HytenTM Elevated Quiet-CloseTM round-front toilet seat K-25876 is designed for those with limited mobility and features a comfortable height. The toilet seat has no unattractive riser to detract from your bathroom decor and can be easily removed from the toilet for convenient cleaning. The product meets the IAPMO/ANSI Z124.5 standards.
The seat shape type is round-front, with a closed front. The seat-mounting holes are 5-1/2 inches (140 mm) apart and there are 3 holes that are 3 inches (76 mm) in diameter. The product dimensions are as follows:
- Height: 16-3/16 inches (411 mm)
- Width: 14-7/16 inches (367 mm)
- Depth: 16-3/4 inches (425 mm)
- Seat Height: 5-1/2 inches (140 mm)
Product Usage Instructions
To install the HytenTM Elevated Quiet-CloseTM round-front toilet seat K-25876, follow these steps:
- Remove the old toilet seat by unscrewing the nuts underneath the toilet bowl.
- Place the new toilet seat on top of the toilet bowl, making sure that the mounting holes on the seat align with the holes on the toilet bowl.
- Insert the bolts through the mounting holes on the toilet bowl and then through the corresponding holes on the toilet seat.
- Screw the nuts onto the bolts and tighten them with a wrench until they are snug, but do not over-tighten.
To remove the toilet seat for cleaning, simply unscrew the nuts underneath the toilet bowl and lift the seat off. Clean the seat and the toilet bowl with a mild detergent and water, then rinse and dry thoroughly before re-installing.
For detailed warranty information, please visit the Kohler website or contact their customer service at 1-800-4KOHLER (1-800-456-4537).
Features
-
3″ (76 mm) raised seating surface provides a more comfortable height for those with limited mobility
-
The eye-pleasing design mimics a conventional toilet seat, with no unattractive riser to detract from your bathroom decor
-
Round closed-front seat
-
Contoured seat for user comfort
-
Grip-Tight installation hardware makes it easy to fasten the seat – everything is done from above the bowl
-
Quick-Release™ functionality allows seat to be removed easily from toilet for convenient cleaning
-
Grip-Tight bumpers hold seat firmly in place
-
Quiet-Close™ round-front lid and seat prevents slamming
Material -
Plastic construction
Installation -
Installs easily and securely onto your existing toilet bowl
-
For residential use only
Technical Information
All product dimensions are nominal.
- Seat shape type : Round-front
- Seat front type: Closed-front
- Seat-mounting holes: 5-1/2″ (140 mm)
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications. For the most current Specification Sheet, go to
www.kohler.com.
3-5-2023 01:14 – US