MIDLAND K6M-SPEAK Specific Headset User Guide
- June 10, 2024
- MIDLAND
Table of Contents
MIDLAND K6M-SPEAK Specific Headset
Product Information
The Specific Headset is a wireless communication device designed for
motorcycle riders. It comes with speakers, a wired microphone, a boom
microphone, and buttons for controlling the device. The headset is equipped
with Bluetooth technology that allows it to
connect to a phone or GPS device. It also has an intercom feature that enables
communication between two riders who are wearing the headset.
The headset has a micro USB recharge plug for charging its battery. It has a
power on/off button that needs to be pressed for three seconds to turn the
device on or off. The headset has audio and visual feedback features that
indicate its status, such as blue
or red led blinking, steady blue or red led, and purple led.
Product Usage Instructions
Pairing to Phone/GPS
To pair the headset with a phone or GPS device:
- Make sure the headset is powered off.
- Press and hold the button with the Caberg logo for four seconds until the led blinks alternately.
- Activate Bluetooth on your phone or GPS device and search for Bluetooth devices.
- Select “Specific Headset” from the list of available devices.
- If prompted, enter the PIN code 0000.
- Wait for the led to blink four times, indicating that pairing is successful.
Pairing Another Midland Specific Helmet
To pair the headset with another Midland Specific Helmet:
- Make sure both devices are powered on.
- Press and hold the button with the Caberg logo for five seconds on both devices until the leds blink alternately on both devices.
- Wait for the leds to blink three times on both devices, indicating that pairing is successful.
Pairing to a Different Model/Brand Unit
To pair the headset with a different model/brand unit:
- Make sure both devices are powered on.
- Press and hold the button with the Caberg logo for five seconds until the led blinks alternately.
- Follow the phone pairing procedure for your device.
Voice Call
To make a voice call:
- Make sure the headset is powered on and connected to a phone.
- Press the button with the Caberg logo once to answer a call or end a call.
- Press and hold the button with the Caberg logo for three seconds to reject a call.
Volume Adjustment
To adjust the volume:
- While listening to an audio source, such as intercom, music, or phone call, press and hold the button with the Caberg logo to increase the volume.
- While listening to an audio source, such as intercom, music, or phone call, press and hold the button with the + symbol to decrease the volume.
Music
To play music:
- Make sure the headset is powered on and connected to a phone.
- Select a music app from your phone.
- Press the button with the Caberg logo once to play/pause the music.
- Press the button with the Caberg logo twice to skip to the next song.
- Press the button with the Caberg logo twice again to go back to the previous song.
Change Language
To change the language:
- Make sure the headset is powered on.
- Press and hold the button with the + symbol for more than seven seconds.
- Release the + button to select the desired language from the battery status options available.
DESCRIPTION – LEGENDA
Operation
POWER
POWER ON
POWER OFF
PAIRING
PAIRING TO PHONE/GPS
PAIRING ANOTHER MIDLAND SPECIFIC HELMET
PAIRING TO A DIFFERENT MODEL/BRAND UNIT
RESET ALL PAIRINGS
How to use
OPEN/CLOSE INTERCOM
VOICE CALL
Note: Double click on + control -> Redial
ANSWER A CALL 
Note: if the automatic reply is activated, after 8 seconds the call automatically starts.
VOLUME ADJUSTMENT
Frequency 2.4GHz
Max power 2.5mW
MUSIC 
CHANGE LANGUAGE
FCC
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
To download the complete user manual please visit www.midlandeurope.com
Produced or imported by:
MIDLAND EUROPE srl
Via R. Sevardi 7 – 42124 Reggio Emilia – (Italy
www.midlandeurope.com
Read the instructions carefully before installation and use.
Imported in Canada by:
GENTEC INTERNATIONAL 90 Royal Crest Court, Markham,ON L3R 9X6 Canada
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>