O ERRE OASIS R 140 IPX4 Ceiling Fan User Manual

June 10, 2024
O ERRE

O ERRE OASIS R 140 IPX4 Ceiling Fan

O-ERRE-OASIS-R-140 -PX4-Ceiling-product

Product Information

The product is a fixed installation fan with the model name OASIS R, OASIS R 140 IPX4, and OASIS 3KR. It is designed for air exhaustion for domestic and similar purposes. The fan has a maximum fan flow rate of 130-230 m3/min, fan power input of 185-190W, and standby power consumption of 40-60W. The maximum air velocity is 2.6-4.1 m/s, and the fan sound power level is 60dB(A). The product comes in different models, including R90, R120, R140, and R150.

Product Usage Instructions

  1. Ensure that the fan is installed using a flexible cable with a plug or an omnipolar switch with a contact opening distance not less than 3mm.
  2. After installation, ensure that the moving parts of the fan are at least 2.3 meters above the floor.
  3. Do not use the fan in the presence of inflammable vapors such as alcohol or petrol.
  4. Before cleaning or maintenance, disconnect the fan from the power source.
  5. Check that the product is correctly mounted before turning it on.
  6. Ensure that any devices used to fix the fan to the ceiling, such as hooks, can support four times the weight of the fan.
  7. If you notice any unusual oscillation, immediately turn off the fan and contact the manufacturer or qualified personnel.
  8. For any replacement of safety devices in the suspension system, contact the manufacturer or qualified personnel.

Note : This is a general guide. Refer to the user manual for specific instructions related to your product model.

PRECAUTIONS

The products OASIS O.ERRE are ceiling fans to move high quantity of air where installed. This product is artistically made in confirm to applicable CEE rules. Please follow all these indication to ensure performance, mechanical and electrical affidability ad keep always this instructions leaflet. Do not use this product for different application unless indicated by us.

  1. Remove packing and make sure that appliance is undamaged.
  2. Check that your electrical voltage and frequence correspond to those marked on the fan rating label.
  3. This appliance must only be used for the purpose it was built for, i.e. air exhaustion for domestic and similar purposes.
  4. Do not operate the appliance in the presence of inflammable vapours (alcohol, petrol, etc.).
  5. Before carrying out any cleaning or maintenance disconnect the mains electrical supply to the fan by means of a double pole switch or remove the plug.
  6. Make sure you have completely assembled the product before running.
  7. Periodically, at least once a year or more frequently in the case of heavy use, remove the dirt and incrustation from the fan and motor casing. It is also very important to make sure the fan is not deformed or cracked, is able to rotate freely and without oscillation, and is properly fixed to the motor.
  8. When the appliance is out of use, remove the power lead. Moreover, make potentially dangerous parts harmless, especially with regard to children who might play appliance when it is not in use.
  9. Installation must be carried out by qualified personnel according to manufacturer’s instructions. Incorrect installation can cause damage to people, animals or property for which the manufacturer cannot be considered liable.
  10. The fans is a fixed appliance and the electrical supply must be by a fixed wired and fused (e amp.) spur incorporating a double pole switch contact opening of at least 3 mm. or a flexible lead with plug.
  11.  After installation, all the moving pars of the calling fan should not be placed under a height of 2,3 meters from the floor
  12. The replacement of the parts of the suspension system’s safety device must be carried out by the manufacturer, its service center or its qualified personnel.
  13. The fixings for proper installation on ceiling such as hooks or other devices must be secured with sufficient strength to support 4 times the weight of the fan.

WARNING : In case of any unusual oscillating motion, immediately turn off the ceiling fan and contact the manufacturer, the service center, or qualified personnel.

INSTALLATION

O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-1O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-2O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-4O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-5

OASIS R 140 IPX4

O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-6O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-7O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-8O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-9O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-10O-ERRE-OASIS-R-140 -PX4-Ceiling-Fan-
fig-11

COD. P06084000
EP S.p.A Via Del Commercio 1, 25029 – Travagliato BS (Italy)
ph. +39 030 68 62 341 / fax +39 030 68 62 051

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

O ERRE User Manuals

Related Manuals