RATH 7085 Area of Rescue Assistance Sign User Manual
- June 10, 2024
- RATH
Table of Contents
- RATH 7085 Area of Rescue Assistance Sign
- Product Information: Area of Rescue Assistance Sign 7085
- Sign Specifications
- Photoluminescent Material Specifications
- Product Usage Instructions
- Sign Specifications
- Photoluminescent Material Specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RATH 7085 Area of Rescue Assistance Sign
Product Information: Area of Rescue Assistance Sign 7085
The Area of Rescue Assistance Sign 7085 is a photoluminescent sign designed to provide clear identification of an area where individuals can seek assistance during an emergency. The sign is made of high-quality materials and is designed to be durable and long-lasting.
Sign Specifications
- Dimensions: [insert dimensions here]
- Material: [insert material here]
- Color: [insert color here]
- Text: “Area of Rescue Assistance”
- Model Number: 7085
Photoluminescent Material Specifications
- Material Type: [insert material type here]
- Duration: [insert duration here]
- Charging Time: [insert charging time here]
- Color: [insert color here]
Product Usage Instructions
The Area of Rescue Assistance Sign 7085 should be installed in a clearly visible location near the designated area of rescue assistance. Follow these steps for proper installation:
- Clean the surface where the sign will be installed to ensure proper adhesion.
- Peel off the backing from the sign and align it with the desired location.
- Press the sign firmly onto the surface to ensure it is securely attached.
The photoluminescent material on the sign will absorb light during regular use and will glow in the dark, providing clear visibility during emergencies. It is important to periodically check the sign to ensure it is still securely attached and the photoluminescent material is functioning properly.
Sign Specifications
- 7-3/4” H x 7-3/4” W
- Peel and stick mounting for easy installation
- The sign should be mounted above 60” but below 80” from floor to top of sign
- IBC, NFPA, and ADAAG code compliant
- 2-year warranty
Photoluminescent Material Specifications
- The base material is PVC and a non-toxic pigment is added to create the photoluminescent effect
- Material is listed under UL 1994
- After being exposed to 1 foot-candle of light for 60 minutes, a minimum luminance shall be 30 millicandelas per square meter at 10 minutes and 5 millicandelas per square meter after 90 minutes
- Also meets IBC 2015 Section 1025.4 and New York Local Law 24
- Typical material life expectancy is 25+ years
N56 W24720 N. Corporate Circle Sussex, WI 53089
800-451-1460
www.rathcommunications.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>