ELECANE DC-656 Rechargeable Small Dog Bark Collar User Manual

ELECANE DC-656 Rechargeable Small Dog Bark Collar

Thank you for purchasing the Elecane Bark Collar. The product has been specially developed for small dogs and their owners.  Dear dog lovers, our company and its employees love pets and don’t want to do any harm to them. That’s why only humane ways of influence, such as sound warning and vibration, are used in our bark correction collars.  Based on different testing models of the Elecane, it achieves an efficiency of 75-80% with the dogs that stopped barking within one week. 10-15% of dogs need up to two weeks, and about 5% of dogs need more time. Unfortunately, 3-5% of dogs aren’t susceptible to bark correction through exposure to sound and vibration.

Important!
If our product didn’t help you solve the problem with excessive barking, don’t hesitate to contact our support team at support@elecane.com, and we will help you or reimburse the purchase.

Principle Of Operation

The main element of the Elecane bark collar is the sensor. It recognizes and detects your dog’s throat vibration (barking). The sensor detects barking, and the collar is activated, affecting the dog with a vibro-sound warning.

Important!
The impact of the collar on each dog can vary as each dog has a different level of sensitivity to it, and it also depends on the sensitivity, thickness, and structure of the skin, fat, muscles, nervous excitability, etc. In accordance with the requirements of humanity, the Elecane Bark Collar has a special system of restrictions for the duration and intensity of exposure to the dog.

Levels Of Correction

• 1st Bark: sound for 1.5 seconds
• 2nd Bark: sound for 2.5 seconds
• 3rd Bark: sound for 5 seconds + vibration for 1 second
• 4th Bark: sound for 5 seconds + vibration for 1.5 seconds
• 5th Bark: sound for 5 seconds + vibration for 2 seconds
• 6th Bark: sound for 5 seconds + vibration for 3 seconds
• 7th Bark: sound for 5 seconds + vibration for 4 seconds
• 8th Bark: Sleep mode. For the dog’s safety, the collar turns off for 1 minute.

Important!

1. The collar moves to the next correction level consistently and only if the dog continues to bark. If the dog does not bark for 30 seconds, the collar returns to the first correction level.
2. After ‘sleep mode’ activation, the collar returns to the first correction level.

Device Overview

Important!
To turn ON/OFF the collar, press the button for 3 seconds still until the collar beeps and the indicator lights up.

The First Usage

For the collar to start working:

1. To charge collar 1.5-2 hours.
2. Turn on the collar before use. Press the button and hold for 3 seconds. The collar will beep, and the indicator will turn green.
3. Set the collar’s sensitivity to position
4. Press the button for a short while until the collar ceases to emit a signal when the button is pressed. It will be the mode of the lowest sensitivity of the collar. Then press the button. three times, which will be mode 4.
   • Each time you press the button, the collar will sound like a beep, so you know that the mode has switched. Adjust the sensitivity if necessary.

How To Put A Collar On A Dog

1. Check whether the collar fits tightly or not. If necessary, adjust it. You must cut the excess strap.
2. Install the collar block in the middle of the strap. Note that the collar block moves along the strap as you pull on it.
3. You must put the collar on the dog so the block is in the center of the throat. The collar reacts to the vibration of the throat when the dog barks.

Important!
Read on for more details and features of use!

Charging Instruction

The collar needs to be charged when the red light continues flashing slowly for 30sec and then turns off automatically.

1. Open the Battery Charging Rubber Cover on the Anti Bark Collar, plug one end of the cable in the charging port and connect the other end to the adaptor, computer, notebook, or power bank. (Note: please make sure that the adaptor output is 5V/500 – 1000mAh.)
2. Plug the Lithium Polymer Charger into an electrical power outlet of standard household voltage (110-230V) based on your local standard.
3. The red light will be steady when fully charged within 1.5 to 2 hours. It turns green light when charged fully.
   • Charging Time: 1.5-2 hours
   • Work Time: The battery charge lasts up to 14 days with ordinary use.
   • Time Of Non-Stop Working: 6-7 hours

Important!
The work time of the battery can vary depending on the frequency of the collar activation.

Testing The Collar Before Using

Take the collar in your hands, facing the back side of the collar, and gently blow a small puff of air towards the small hole between the vibration prongs. You will hear a sound. Blow a puff of air again. You will hear the second sound. Blow for the third time, and you will hear a sound and feel a mild vibration (similar to the cell phone vibration). You may continue to do this till the 7th correction level is reached.

Adjusting The Sensitivity

There are two BUTTONS , which are used to adjust the sensitivity. The higher the sensitivity level is, the easier it is to trigger the collar. Press the button for a short while until the collar ceases to emit a signal when the button is pressed. It will be the mode of the lowest sensitivity of the collar (the 1st). Then press the button three times, which will be mode 4. Each time you press the button, the collar will sound like a beep, so you know that the mode has switched. It would be best if you found the sensitivity level of your dog by experimentation. After turning off and turning back on the collar your settings will remain.

Put The Collar On The Dog

Important!
The correct placement and settings of the collar are essential for its effective work.

1. If the icon is blinking, the battery is not charged. Please charge the device.
2. Put the dog in a comfortable position that allows you to apply the collar correctly.
3. Install the collar receiver (main body) in the middle of the strap. Note that the collar receiver moves along the strap as you pull on it. Put the collar on your dog – high under the jaw and tighten the strap. The collar’s receiver must be located precisely in the middle of the neck, one inch below your dog’s Adam’s apple.
4. For your dog’s comfort in wearing the collar, please adjust the strap correctly. Put the collar on the dog, and leave a couple of inches so that the collar will fit your dog’s neck as it grows or has thick fur. Then take it off, cut off the excess and burn the cut with fire for a couple of seconds. For your pet’s safety, please do it out of your dog’s reach.
5. If the dog’s hair on the throat is long, it must be shortened for the collar to work correctly.
6. Let your dog wear the collar for a couple of minutes and then check again if it fits well. When the dog gets used to the collar, double-check the correct placement of the collar.

Important!
If you don’t tighten the strap tight enough, it won’t work correctly. There will be no contact, besides, it can rub the dog’s neck. To check the collar’s fit, insert your finger between the end of the contact points and the dog’s neck. The finger should be snug, but the dog should not experience breathing problems. In some cases, it may be necessary to shorten the fur around the contact point for direct contact.

Frequently Asked Questions

What is the Elecane Bark Collar designed for?****

The Elecane Bark Collar is specially developed for small dogs and their owners to control excessive barking.

What kind of correction methods does the Elecane Bark Collar use?****

The Elecane Bark Collar uses humane ways of influence, such as sound warning and vibration, to correct barking behavior.

What is the efficiency rate of the Elecane Bark Collar?****

Based on different testing models, the Elecane Bark Collar achieves an efficiency rate of 75-80% with dogs that stopped barking within one week. 10-15% of dogs need up to two weeks, and about 5% of dogs need more time. Unfortunately, 3-5% of dogs aren’t susceptible to bark correction through exposure to sound and vibration.

How does the Elecane Bark Collar work?****

The main element of the Elecane Bark Collar is the sensor that recognizes and detects your dog’s throat vibration (barking). The sensor detects barking, and the collar is activated, affecting the dog with a vibro-sound warning.

How does the collar move to the next correction level?****

The collar moves to the next correction level consistently and only if the dog continues to bark. If the dog does not bark for 30 seconds, the collar returns to the first correction level. After ‘sleep mode’ activation, the collar returns to the first correction level.

How do I turn on/off the Elecane Bark Collar?****

To turn ON/OFF the collar, press the button for 3 seconds still until the collar beeps and the indicator lights up.

How do I adjust the sensitivity of the Elecane Bark Collar?****

There are two buttons that are used to adjust the sensitivity. Press the button for a short while until the collar ceases to emit a signal when the button is pressed. It will be the mode of the lowest sensitivity of the collar (the 1st). Then press the button three times, which will be mode 4. Each time you press the button, the collar will sound like a beep, so you know that the mode has switched. You should find the sensitivity level of your dog by experimentation. After turning off and turning back on the collar, your settings will remain.

How do I put the Elecane Bark Collar on my dog?****

Put the dog in a comfortable position that allows you to apply the collar correctly. Install the collar receiver (main body) in the middle of the strap. Note that the collar receiver moves along the strap as you pull on it. Put the collar on your dog – high under the jaw and tighten the strap. The collar’s receiver must be located precisely in the middle of the neck, one inch below your dog’s Adam’s apple.

How does the ELECANE DC-656 Small Dog Bark Collar work?****

The ELECANE DC-656 Small Dog Bark Collar is designed to help train dogs to reduce excessive barking. It uses sound and vibration sensors to detect when the dog barks. When the barking is detected, the collar delivers a harmless static stimulation to interrupt the barking behavior.

Is the ELECANE DC-656 Small Dog Bark Collar safe for my dog?****

Yes, the ELECANE DC-656 Small Dog Bark Collar is designed with the safety and well-being of dogs in mind. The static stimulation it delivers is gentle and harmless, meant to interrupt the barking behavior without causing any harm or pain to the dog.

Can the ELECANE DC-656 Small Dog Bark Collar be adjusted for different dog sizes?****

Yes, the ELECANE DC-656 Small Dog Bark Collar is adjustable to fit different sizes of dogs. It usually comes with an adjustable strap that can be fitted comfortably around the dog’s neck.

How long does the battery of the ELECANE DC-656 Small Dog Bark Collar last?****

The battery life of the ELECANE DC-656 Small Dog Bark Collar can vary depending on usage. Typically, it can last for several weeks or even months, depending on how often the dog barks and the collar is activated. It is recommended to replace the battery when it becomes low to ensure consistent performance.

Can the ELECANE DC-656 Small Dog Bark Collar be used in all weather conditions?****

The ELECANE DC-656 Small Dog Bark Collar is generally designed to be water- resistant or waterproof, allowing it to withstand light rain or splashes. However, it is important to refer to the manufacturer’s instructions to understand the specific waterproof rating and any limitations or precautions for use in certain weather conditions.

Video – Product Overview

Download The PDF Link:ELECANE DC-656 Rechargeable Small Dog Bark Collar User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>