MAJORITY ARBURY – Portable Digital Radio Instruction Manual

AR BURY 2
PORTABLE DIGITAL RADIO
ARB-DAB-2

3 YEAR WARRANTY
Register your product online for a FREE 3 year extended warranty at: www.majority.co.uk

Controls And Functions
Front View

1. Info/Menu
2. Preset
3. Power/Mode
4. Dimmer
5. Previous
6. Next| 7. Enter/Snooze
8. Volume
9. Volume +
10. LCD display
11. Antenna
---|---

Rear View 12. Off/On Switch
13. DC 5V,1A Power Connector
14. Charging Light Indicator
15. 3.5mm Headphone Socket

Box Contents

1. Majority Arbury II Radio
2.  USB to DC 5V, 1A Power Supply
3.  Instructions Guide

Support
Thank you for your purchase of the Majority Arbury II. Please follow the guidance of the manual to set up your radio and enjoy its fantastic variety of stations and features. If  you require further assistance with your new radio, please contact our support team on the Majority website: www.majority.co.uk/support

Getting Started
Please note all (Ref.) refer to Pages 1-2 of the Controls and Functions guide. Plug the power connector into the back of the system via the port that is labeled as DC 5V (Ref.13). Alternatively, charge the radio for approximately 3.5 hours to charge the internal battery. This will allow for approximately 6 hours of charge and portability. Once powered or charged, switch the Power Supply switch on the back of the system to ‘ON’ (Ref.12).
Ensure the antenna (Ref.11) is extended as far as possible so that you can rotate it. This will allow you to receive the best possible signal before DAB or FM mode is selected.
Press the ‘Power/Mode’ button (Ref.3) to turn on the unit from standby. It will automatically take you to DAB radio mode or the previous mode you were using.
If DAB mode is activated, the radio will automatically begin scanning and storing DAB stations with good signals. The screen will display “FullScan” when it is scanning, and will display a radio station when the scan is complete. If the radio does not automatically begin scanning, simply press and hold the ‘Menu’ button (Ref.1) then select Full scan to initiate a full scan. Once it is finished, the first available station will begin to play To place the music system in standby mode, press and hold the ‘Power/ Mode’ button (Ref.3) To turn the radio off fully, switch the button on the rear of the unit (Ref.12) to OFF and turn the power off at the source or unplug the USB cable. This would be advisable to have the radio’s internal battery charge if you are operating it in this way instead of operating it from the mains.
DAB/DAB+ Radio
Press the ‘Power/Mode’ button (Ref.3) to switch to DAB Radio. On first use, it will automatically scan all available stations and save them. Fully extend the antenna (Ref.11).
If the radio does not automatically begin scanning, simply press and hold the ‘Menu’ button (Ref.1) then select Full scan to initiate a full scan. This would be advisable if you are having trouble listening to particular stations.
Once you have chosen to scan, the radio will display “Full Scan” as it starts scanning up the frequency band. Once the scan is complete, the first radio station with a good signal will begin to play.
To browse through all of the stations that have been stored, use the   ‘Next’ (Ref.6) and ‘Prev’ (Ref.5) buttons to scroll through the stations. Once you have found your desired station, press ‘Enter/Snooze’ (Ref.7) to confirm your choice.
When listening to a DAB station, you can access station information by pressing the ‘Info/Menu’ button (Ref.1) repeatedly to view information available.

DAB/DAB+ Radio Presets
How to store a preset DAB station
Up to 10 stations can be preset for easy navigation. To store a station that you are currently playing:
Press and hold the ‘Preset’ button (Ref.2) for 2-3 seconds until the Preset Store settings open and “<1: (Empty)” will show on the display. Release your finger from the ‘Preset’ button.
Press the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) button to change the “<1” to the preset number you want to store the station as. Once on the chosen number, followed by pressing the ‘Enter/Snooze’ button (Ref.7) to save.  The display will then show “Preset (X) stored” to signify the saved preset station. Follow the same guidance to set up to 10 preset DAB stations.  To delete a stored preset station, simply save another station in that preset number.
How to play a preset radio station
To listen to one of your preset stations, do the following:
Press the ‘Preset’ button (Ref.2) to open the Preset Recall screen. Do not hold down the button as this will open the Preset Store settings.
Press the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) buttons to scroll through your saved preset stations. You can store up to 10 presets.
Press the ‘Enter/Snooze’ button (Ref.7) to select your choice and this station will begin to play.

Station Information for DAB Radio
When you are listening to a DAB/DAB+ radio station with a good signal you can press the ‘Info/Menu’ button (Ref.1) repeatedly to show the different program information.
Bit Rate: This shows the data rate at which the signal is being transmitted.
Bit Error Rate (BER) : Provides details of the signal error rate.
Channel and Frequency : Displays the station’s transmission channel number and frequency.
PTY (Programme Type) : This shows the type and description of the program provided by the DAB station.
Time and Date : Displays the time and date information provided by the broadcaster.
Bit Rate : The data rate at which the signal is being transmitted.
Dynamic Label Segment (DLS): Displays scrolling text information supplied by the broadcaster.

FM Radio
Press the ‘Power/Mode’ button (Ref.3) multiple times to switch to FM. The first time you do this, the FM frequency “87.5 MHz” will be displayed on the screen.
Fully extend the antenna (Ref.11).
To scan for the available stations with a good signal, simply press and hold the ‘Menu’ button (Ref.1) then select Full scan to initiate a full scan.
The next available station will then begin to play.
To go to the next station with a good signal, press (do not hold) the ‘Scan’ button.
The radio will display station information when you press the ‘Info/ Menu’ button (Ref.1). Press multiple times to view all information
How to tune a specific frequency manually
To listen to a specific frequency, press and hold the ‘Next’ button (Ref.6) to search forward quickly, or the ‘Prev’ button (Ref.5) to search back quickly. It will stop searching when the button is released. To search slowly, press the ‘Next’ (Ref.6) and ‘Prev’ (Ref.5) buttons multiple times rather than holding.

FM Radio
Mono and Auto
When on FM mode, you can change between Mono and Auto by pressing the ‘Enter/Snooze’ button (Ref.7).
Playing ‘Strong’ or ‘All’ FM Stations
When on FM mode, you can decide if you would like to pick up all stations (even if they do not have a good signal), or just the stations with a strong signals.
To do this, press and hold the ‘Info/Menu’ button (Ref.1) and use the ‘Prev’ or ‘Next’ buttons (Ref.5/6) to scroll through to ‘FM Scan Set’.
Confirm this choice by selecting ‘Enter/Snooze’ (Ref.7).
You can now choose between ‘Only’ or ‘All’. Select “Only” with the ‘Enter’ button to only receive the stations with a good signal.

FM Radio Presets
How to store a preset FM station
Up to 10 stations can be preset for easy navigation. To store a station that you are currently playing:
Press and hold the ‘Preset’ button (Ref.2) for 2-3 seconds until the Preset Store settings open and “<1: (Empty)” will show on the display.
Release your finger from the ‘Preset’ button.
Press the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) button to change the “<1” to the preset number you want to store the station as. Follow by pressing the ‘Enter’ button (Ref.7) to save. The display will then show “Preset (X) stored” to signify the saved preset station. Follow the same guidance to set up to 10 preset DAB stations. To delete a stored preset station,  simply save another station in that preset number.
How to play a preset radio station
To listen to one of your preset stations, do the following:
Press the ‘Preset’ button (Ref.2) to open the Preset Recall screen. Do not hold down the button as this will open the Preset Store settings.
Press the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) buttons to scroll through your saved preset stations. You can store up to 10 presets.
Press the ‘Enter/Snooze’ button (Ref.7) to select your choice and this station will begin to play.

Station Information for FM Radio
When you are listening to an FM radio station with a good signal, you can press the ‘Info/Menu’ button (Ref.1) repeatedly to browse through different program information.
Signal Strength: Displays a signal bar with the strength of the current station.
Time and Date : Displays the time and the date.
Frequency: Displays the station’s transmission frequency.
Audio Type : Displays the audio type of the station you are listening to. It will either be Stereo or Mono.
Radio Text : Displays scrolling text information supplied by the broadcaster.
Program Type: Displays a description of the type of program provided by the broadcaster.

Clock & Date Settings
Once the radio has been put into DAB mode, the time and date should automatically set. If this does not happen or you wish to alter the time and date, follow the below guidance:
Manually Setting the Time
Ensure the unit is turned on and out of standby.
To enter radio settings, press and hold the ‘Info/Menu’ button (Ref.1).
Use the ‘Prev/Next buttons (Ref.5/6) to scroll through to “Time/Date” and press the ‘Enter/Snooze’ button to confirm the choice (Ref.7).
Once this option is selected, the hour will then flash on the display screen. You can now alter the time hour by pressing the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) buttons until the required hour is displayed.
To confirm the hour press the ‘Enter/Snooze’ (Ref.7) button.
The minutes will then flash on the display screen. Press the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) buttons until the required minute is displayed.
To confirm the minute press ‘Enter/Snooze’ (Ref.7).
The time is now set and you will be able to alter the date in the next step.

Clock & Date Settings
Manually Setting the Date
The date can be changed straight after changing the time.
The year will flash on the display screen. To change the date year, press the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) buttons until the required year is displayed.
To confirm the year press the ‘Enter’ (Ref.7) button.
The month will now flash on the display screen. Press the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) buttons until the required month is displayed.
To confirm the month press the ‘Enter’ (Ref.7) button.
The day unit will then flash on the display screen. Press the ‘Prev’ (Ref.5) or ‘Next’ (Ref.6) buttons until the required data is displayed.
To confirm the date, press ‘Enter’ (Ref.7).

Dual Alarm Setting

1. Press and hold the ‘Info/Menu’ button (Ref.1).
2. Use the ‘Prev/Next buttons (Ref.5/6) to choose “Alarm 1 Set” or “Alarm 2 Set” and press the ‘Enter’ button (Ref.7) for the alarm you wish to set.
3. Once alarm 1 or 2 is selected, OFF will display on the screen. To turn the alarm on, use the ‘Next’ button (Ref.6) to make “ON” flash on the display. Press the  ‘Enter/Snooze’ button (Ref.7) to confirm the alarm switch on.
4. The hour digits for the alarm will then flash. To set the hour you want the alarm to sound, press the ‘Prev’ or ‘Next’ buttons (Ref.5/6) to browse to the hour and press the ‘Enter’ button (Ref.7) to confirm your choice.
5.  The minutes of the alarm is now able to be set. Using the ‘Prev’ or ‘Next’ buttons (Ref.5/6), scroll up and down the minutes and press the ‘Enter’ button (Ref.7) to confirm your choice.
6. Now choose when you would be alarmed to sound. Using the ‘prev’ or ‘Next’ buttons, scroll through the alarm options: ‘Once/Daily/Weekends/ Weekdays’. Use the ‘Enter’ button to confirm the selection.
7.  Once the alarm time is set, you can change the alarm volume by pressing the ‘Prev’ or ‘Next’ buttons (Ref.5/6) to choose the noise level. Press the ‘Enter’ button (Ref.7) to confirm.
8. You can now choose the alarm tone sound. Press the ‘Prev’ or ‘Next’ buttons (Ref.5/6) to change between which sound you would like: Alarm, DAB or FM Radio, and press the ‘Enter/Snooze’ button (Ref.7) to confirm.

Alarm Functions

To Cancel Alarm 1 or Alarm 2
To cancel the alarm, press and hold the ‘Info/Menu’ button (Ref.1).
Use the ‘Prev/Next buttons (Ref.5/6) to choose “Alarm 1 Set” if you wish to cancel alarm 1, or “Alarm 2 Set” if you wish to cancel alarm 2. Press the ‘Enter/Snooze’ button to confirm your choice (Ref.7).
To turn the Alarm off, press the ‘Next’ button (Ref.6) so that “OFF” is flashing and press the ‘Enter/Snooze’ button (Ref.7) to confirm.
Snooze/Switch off Alarm when Sounding
When the alarm sounds, press the ‘Enter/Snooze’ button (Ref.7) to snooze the alarm for another 9 minutes. The radio will go into standby mode.
To turn the alarm off completely, press the ‘Power/Mode’ button (Ref.3). If you do not turn the alarm off or put it on snooze, the alarm will sound for 10 mins before it turns off automatically.

Other Functions
Sleep Setting
This enables you to program the radio to switch off at a selection of set times up to 120 minutes from activation.
Press and hold the ‘Info/Menu’ button (Ref.1).
Use the ‘Prev/Next buttons (Ref.5/6) to choose “Sleep Timer” and press the ‘Enter’ button (Ref.7) to confirm this option.
Using the ‘Prev’ or ‘Next’ buttons (Ref.5/6) choose the sleep timer amount from activation: OFF, 15mins, 30mins, 45mins, 60mins, 90mins, or 120mins.
When your choice is displayed press the ‘Enter/Snooze’ button (Ref.7).
The system will automatically start the timer.
To turn the sleep timer off, follow the above instructions and select “OFF” from the choices.
Once the timer has been set, the minutes will count down on the display screen. For example: if set to turn off in 5 minutes, “S5” will flash, counting down to “S0”. The radio will then go into standby mode.

Other Functions
System Reset
To erase all setting and preset options, and reset your radio, perform a factory reset. This would also be advisable if you are having any functionality issues with your radio.
To perform a factory reset, press and hold the ‘Info/Menu’ button (Ref.1).
Use the ‘Prev/Next buttons (Ref.5/6) to browse to the “Factory Reset” option and press the ‘Enter’ button (Ref.7) to confirm.
The display screen will then show “Factory Reset?”. To confirm the factory reset, use the ‘Next’ button (Ref.6) to choose “Yes”. Press ‘Enter/
Snooze’ (Ref.7) to initiate the factory reset.
SW Version – Software Version Display
To view the software version, press and hold the ‘Info/Menu’ button (Ref.1).
Use the ‘Prev/Next buttons (Ref.5/6) to select “SW Version” and press the ‘Enter’ button (Ref.7). The software version will then display.

Internal Rechargeable Battery
Play Time
The Arbury has an internal rechargeable battery that has a playtime of 6 hours when it is fully charged. This will allow you to take the radio on the go and use it portably.
If you want to turn your radio off, save the battery life by putting into standby mode and then turn it off at the ON/OFF switch.
To charge the radio, plug your radio into a USB power supply with the power lead provided.
Charging
The unit will charge in standby and working mode if it is connected to a USB power supply.
To confirm that the unit is on the charge, a red light will appear on the back of the system (Ref.14). The unit takes approximately 2 hours to fully charge, after which the light will show blue.

Observation

|

Potential Cause/Solution

---|---
No sound| The station is not tuned in. Fine-tune the station.

The volume is set to a low position. Increase the volume. Headphones may be connected. Disconnect the headphones.

Buttons are not working| Turn off the unit and turn it on after a few seconds.
FM: Static sound

DAB: Burbling/ intermittent cut-out

| Signal reception is low. Adjust the aerial or move the unit to a stronger signal location.

Re-scan stations.

Sound is distorted| The volume is too high. Adjust the volume control.
Desired station not found| Weak signal. Use the manual tune function.
The display shows “No Service”| There is no DAB coverage in your area or poor reception. Adjust the position of the aerial, or move the unit to a stronger signal location.
Display is blank| This may occur if the broadcaster changes the label of service or removes a label while tuning. The radio will try to retune or perform a scan.
Time and Date not set automatically| For the time and date to be set automatically you need to turn on the system and switch to DAB radio and let this scan. Then press the ‘Power Mode’ button and the will go into standby. The date and clock will update automatically.

Technical Specifications

Warranty All products come with a standard 12-month warranty. All items must be registered on www.majority.co.uk for the warranty to be valid. Once on the web page, use the menu to find “ register your product”.You will also be given the chance to extend your warranty for an additional 24 months, free of charge.

Safety Information

1.  Read these instructions.
2.  Keep these instructions. Instructions are also available for download at www.majority.co.uk
3.  Heed all Warnings
4. Follow all instructions
5. Do not clean the apparatus near or with water
6.  D does not block any ventilation openings. Install in accordance with the manufacturer’s instructions
7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.  Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. . Only use attachments/accessories specified by the manufacturer.
11.  Unplug this apparatus during light storms or when unused for long periods of time.
12.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally, or has been dropped.
13.  No naked flame sources, such as lit candles, should be placed on the apparatus.
    Dispose of used electrical products and batteries safely according to your local authority and regulation

ADDITIONAL WARNINGS
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be placed on the apparatus.
The mains plug is used to disconnect the device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
RECYCLING ELECTRICAL PRODUCTS
You should now recycle your waste electrical goods and in doing so help the environment.
This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.
IMPORTANT: Please read all instructions carefully before use and keep them for future reference.
Risk of electric shock. Do not open
Read all instructions carefully before use and keep them for future reference
When servicing, use only identical replacement parts

www.majority.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>