MORRIS SVC9704 Vacuum Cleaner Instruction Manual
- June 5, 2024
- MORRIS
Table of Contents
MORRIS SVC9704 Vacuum Cleaner
Safety Cautions:
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- For the first operation, it is advisable to read the manual carefully beforehand and keep it properly for future use.
- Before first operation, make sure the dust cup or the dust bag is properly installed.
- Make sure the power supply is 230V~ 50Hz。
- Do not use to pick up water and inflammable materials.
- Do not pick up burning materials and ashes.
- Do not use the machine without a motor protection filter filled.
- Please change the dust bag immediately if it is damaged.
- Do not store or use the machine close to high temperature sources.
- Dot not let children use the machine in case of danger.
- If abnormal noise, smell, smoke or any other failure or breakage is found during the operation, you should turn off the switch and unplug it. Then contact with your service center for repair. Do not repair by yourself.
- The plug must be removed from the power socket before any maintenance or replacement.
Failure clearance
Less vacuum power of the cleaner
- The cleaner can leave dust out of the full dust cup or the dust bag.
- If blockage is found in ground brush, hose or tubes, the machine can be re-operated only after the blockage is cleared away.
Introduction of Product
Your vacuum cleaner can produce centralized wind, adjust the operation speed, indicate full dust, and automatically rewind the wire, multi-level filter exchange. Being convenient and flexible in cleaning dust, it is reliable and ideal household cleaning tool.
- Lock clip
- Front cover
- Back cover
- Dust full indicator
- Cord rewinding pedal
- ON/OFF switch pedal
- Speed control button
- Big wheel
Included accessories: A set of hose accessories, one extendible tube, one floor brush, one integrated brush & nozzle
Operation methods:
-
Connect the hose accessories: insert the hose end into the hose socket at the front cover and then hook it. (Fig1)
Remove the hose accessories: press the adaptors at both sides of the hose end and then pull the hose accessories. (Fig2) -
Connect the telescopic tube to the curves end of the hose. (Fig3)
-
Connect the different nozzle tools to the tube depending on your selected different cleaning purpose: floor brush (adjusted to the type of ground) for carpet or floor (Fig4,5); combined brush & nozzle for sofa, wall surface, curtain, corner or space between furniture and etc. (Fig6)
-
Switch on the appliance: insert the plug of cord into the power socket which conforms to that on the label for power supply, and press the on/off switch pedal, the appliance shall start operating (Fig7).
-
Cord rewinding: hold the plug and pull out the cord; at the same time press the cord rewinding pedal, and the power cord will be retracted inside (Fig8)
Maintenance:
-
Change the dust bag: when the dust full indicator turns to be red, it is time to clear the dust or replace with a new bag (cloth dust bags can be emptied and/or washed and then be re-used). (Fig1)
Open the front cover by clipping. (Fig2)
Take out the bag holder then remove the full dust bag. (Fig3) -
Exchange the outlet filter: clip down and remove the outlet cover by hand in order to replace the filter.(fig4,5)
-
The motor protection filter should be removed and rinsed occasionally, and can be use again only once it is completely dry. If the filter is damaged, it should be replaced with a new filter element. (Fig6)
NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-
life,
should be disposed of separately from your household waste. Please dispose of
this equipment at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used
electrical and electronic products.
Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
Herewith, Amiridis-Savvidis S.A. states that this product, complies with the
requirements of below directives:
EMC-Directive: 14 / 30 / EU
Low Voltage Directive: 14 / 35 / EU
ErP Directive 09 / 125 / EC
CE Marking: 93 / 68 / EEC
RoHS Directive: 11 / 65 / EU & 15 / 863 / EU
The detailed declaration of conformity can be found at
www.morris.gr
Exclusive importer in Greece:
Amiridis – Savvidis S.A.
87A, 17th Noemvriou str, P.C. 55534
Thessaloniki – Greece
T: +302310944944 | F: +302310944940
www.amiridis-savvidis.gr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>