ELECANE Small 11-X Anti Barking Collar User Manual

June 10, 2024
ELECANE

ELECANE Small 11-X Anti Barking Collar

ELECANE-Small-11-X-Anti-Barking-Collar-product

Product Overview

ELECANE-Small-11-X-Anti-Barking-Collar-fig-1

Introduction

The intelligent Anti Bark Collar stops barking with progressively increasing sound and vibration stimulation. It is humane and safe and does not use static shock stimulation.

Easy to use and test, activated by throat vibration when dog is barking. A microprocessor distinguishes your dog’s bark from other environmental noises and automatically delivers a sound and vibration after each bark.

Important Note:

When the collar is fitted correctly IT DOES NOT MOVE. If it is NOT FITTED CORRECTLY, it will go off randomly and NOT work when your dog barks.

Main Features

Rechargeable and Water-Resistant Bark Collar

  • Safe and short prongs
  • Combined Functions: Sound and Vibration
  • 7 Levels of Sensitivity for different dogs.
  • Easy and Quick Testing.
  • Battery Life LED Indicators.

Operating Instructions

The Mode Button is . Press the  for 2 secs, the Green Light will come on. You turn on the collar in Sound and Vibration mode. Press the  for 2 secs, Green Lights will go off. You have now turned the collar off. When it is in GREEN LIGHT Mode, what the Bark Collar actually does when Your Dog Barks:

On the 1st Bark, 1.5 Sec Beep

2nd Bark within 40 secs, 2.5 Sec Beep

3rd Bark within 40 secs, 4 Sec Beep 0.5 sec vibration

4th Bark within 40 secs, 4 Sec Beep 1 sec vibration

5th Bark within 40 secs, 4 Sec Beep 3 sec vibration

6th Bark within 40 secs, 4 Sec Beep 3 sec vibration

7th Bark within 40 secs, 4 Sec Beep 5 sec vibration.

The collar will now enter sleep mode for 1 minute If your dog does not bark within the 40 sec limits then the collar will revert back to number 1.

Charging Instructions

The collar needs to be charged when the red light continues flashing slowly for 30s, and then turns off automatically.

  1. Open the Battery Charging Rubber Cover on the Anti Bark Collar, plug one end of the cable in the charging port and connect the other end to the adaptor, computer, notebook or power bank.

(Note: please make sure that the adaptor output is 5V/500-1000mA.)

The Red Light will be steady on when charging.

  1. Plug the Lithium Polymer Charger into an electrical power outlet of ordinary household voltage( 110-230V) based on your local standard.
  2. The Green Light will be steady on when fully charged within 1.5 to 2 hours.

Putting The Collar On Your Dog:

Ensure that you have turned the collar off. Check the collar and adjust Strap to the correct length, these prongs MUST be against your dog’s skin to work, If need be, shave your dog’s throat to get good contact, remember it is only for a short period of time.

Place the collar around your dog’s neck, it must not move, if it does then adjust and tighten the collar.

Prongs need to be either side of dog’s windpipe.

Now leave the collar on your dog. Do Not turn the collar back on. Wait for 24 – 48 hours until your dog totally ignores the collar, initially they will scratch at it and just paw at it, when that completely stops, we are ready to start the training.

You must be present when you turn on the collar and start the training.

Do not just leave your dog to figure it out, teach them from the start.

Do Not Under Any Circumstances Put The Collar On Your Dog Without First Testing It. Testing the Collar, You do not have to bark at it. Just test by scratching the rough surface of the test tool on the bark collar(as shown in the diagram) using a fingernail or pen.

First time the bark collar will emit sound.

The second time the bark collar will emit sound.

The third time the bark collar will emit sound & vibration for 1.5 seconds.

Then repeat the same process if you want to try it again. Now you have tested the collar take the sensitivity all the way down to number 1 by pressing the – button on the collar. If your dog barks and the collar does not beep, press the + button once this will increase the sensitivity to number 2, if your dog barks again and no beep, once again press the + button, continue this until the collar beeps immediately after your dog’s bark.

Your Collar Is Now Set Up Correctly. Now we are going to start the Training, under no circumstances should you just put the collar on your dog and leave it them to figure out, your dog will get confused and extremely upset.

You must teach them what you expect from them. Remember every time your dog barks you give the command NO. The collar will reinforce that command. If your dog continues to bark then you give a much more forceful NO and the collar will do the same, again continuation you give a much more forceful NO! Again, the collar will mimic you. This way your dog will understand that the beep means NO. The beep and vibration mean NO! And the way to stop the discomfort is to stop barking. Do Not Just Put The Collar On Your Dog And Expect Them To Understand What It Is Supposed To Mean, I Will Admit Some Dogs Are Super Smart And Will Understand Almost Immediately, But What If Your Dog Doesn’t Understand, Help Them Understand, Teach Them Always. Remove The Collar When Your Dog Is Playing.

Please remember that this collar is a behavioral aid and you do not want to be telling your dog off while they are playing.

Caution Notes:

  1. Do not allow your dog to chew this collar. You should also attempt to minimize scratching or clawing at the casing.
  2. This device is made up of plastic and electronic components that are not digestible. Consult your local vet if your dog swallows any part of this product.
  3. The collar is not intended for use as a restraining collar. If you are using a leash, use it with a Separate restraining type of collar.

Fault Finding Guide

  1. The Collar Just Keeps Going Off.

A1. The sensitivity is set too high. You reduce the sensitivity by pressing the minus button.

A2 The collar is not tight enough, please tighten the collar.

  1. My dog shakes his head and the collar goes off.
  2. Because the collar feels unusual to your dog, they will keep shaking their heads and scratching forcing the collar to activate.
  3. My Dog Barks But the Collar Does Not Activate.
  4. Check the battery by performing a full test. If the collar tests correctly then you will need to either Increase the sensitivity of the collar. Making it more sensitive + will make it activate easier. Or the collar is too loose, please tighten the collar.
  5. Collar will Beep but Will Not Vibrate.
  6. There is enough charge in the battery to make it beep but not vibrate. Please recharge the battery.

FAQ’s

How does the ELECANE Small 11-X Anti Barking Collar work?

The ELECANE Small 11-X Anti Barking Collar is designed to detect excessive barking in dogs. It uses sound and vibration sensors to detect barking and delivers a gentle static correction or vibration to discourage barking behavior.

Is the ELECANE Small 11-X Anti Barking Collar suitable for all dog sizes?

The ELECANE Small 11-X Anti Barking Collar is specifically designed for small- sized dogs. It may not be suitable for larger dog breeds.

Is the static correction provided by the collar safe for my dog?

Yes, the static correction provided by the ELECANE Small 11-X Anti Barking Collar is designed to be safe and humane. It is a mild stimulation that acts as a deterrent to barking behavior without causing harm to your dog.

How long should I leave the collar on my dog?

It is generally recommended to only leave the ELECANE Small 11-X Anti Barking Collar on your dog when necessary, such as during periods when excessive barking needs to be addressed. It is advisable to remove the collar during playtime, sleep, or when your dog is unsupervised.

Can the ELECANE Small 11-X Anti Barking Collar be used for other training purposes?

The ELECANE Small 11-X Anti Barking Collar is specifically designed to address excessive barking and may not be suitable for other training purposes. It is primarily intended as an aid to discourage barking behavior.

Is the collar adjustable for different sensitivity levels?

Yes, the ELECANE Small 11-X Anti Barking Collar usually comes with adjustable sensitivity levels to suit your dog's needs. This allows you to find the appropriate level of correction for your dog's barking behavior.

Is the collar waterproof?

The waterproof capability may vary depending on the specific model of the ELECANE Small 11-X Anti Barking Collar. Some models are designed to be water- resistant, allowing for use in light rain or when your dog is near water. However, it's important to check the product specifications to determine the specific waterproof rating.

How long does the collar's battery last?

The battery life of the ELECANE Small 11-X Anti Barking Collar can vary based on usage. Typically, the collar's battery can last for several weeks or even months, depending on the frequency of use and the specific model.

Can I use the collar on multiple dogs?

It is generally recommended to use one collar per dog to ensure accurate detection and appropriate correction for each individual dog. Using the collar on multiple dogs simultaneously may not provide optimal results.

How can I ensure the collar fits my dog properly?

To ensure proper fit, it is important to measure your dog's neck circumference accurately and adjust the collar accordingly. Follow the manufacturer's instructions for sizing and fitting the ELECANE Small 11-X Anti Barking Collar to ensure it is snug but not too tight on your dog's neck.

Is it OK to use anti-bark collar?

Anti-bark collars are punishment devices and are not recommended as a first choice for dealing with a barking problem. This is especially true for barking that's motivated by fear, anxiety or compulsion.

What age I can use anti-bark collar?

Generally, all anti-bark collars are suitable for puppies from 5-6 months old. If you decide to get one for your furry friend, starting with vibration or sound collars is better, and they have mild stimulation and will not fear the pup.

Are bark collars safe for small dogs?

The minimum weight for a dog to use most collars is 8 pounds, even with mini dog bark collars. Most manufacturers do not recommend using their collars on dogs smaller than that because they can be too bulky, heavy, and not function as intended.

Video – How To Use

Download This PDF Link: ELECANE Small 11-X Anti Barking Collar User Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ELECANE User Manuals

Related Manuals