S5X0513W Odace Connected Universal Rotary Dimmer LED

Odace – Connected Universal Rotary Dimmer LED

The Odace – Connected Universal Rotary Dimmer LED is a device
that allows users to control the brightness of their LED lights.
The device is manufactured by Schneider Electric SE and its
subsidiaries and is protected by applicable copyright laws.

Features and Functionality

The Odace – Connected Universal Rotary Dimmer LED has the
following features:

• Universal compatibility with most LED lights

• Rotary knob for easy brightness adjustment

• Connected technology for remote control via a smartphone
  app

• Quick Home Connect for easy installation

Device User Guide

The device user guide provides detailed information about the
installation and operation of the Odace – Connected Universal
Rotary Dimmer LED. The guide is available on the Schneider Electric
website at www.se.com.

Legal Information

The Schneider Electric brand and any trademarks of Schneider
Electric SE and its subsidiaries referred to in this guide are the
property of Schneider Electric SE or its subsidiaries. All other
brands may be trademarks of their respective owners. No part of
this guide may be reproduced or transmitted without the prior
written permission of Schneider Electric.

Safety Information

It is important to read and follow all safety instructions
before installing, operating, servicing, or maintaining the Odace –
Connected Universal Rotary Dimmer LED. The device may pose
electrical hazards that can result in personal injury or death if
not handled properly.

Danger and Warning Labels

The Odace – Connected Universal Rotary Dimmer LED may have
Danger and Warning labels that indicate potential hazards. It is
important to follow all safety instructions to avoid injury or
death.

Installation Instructions

Before installing the Odace – Connected Universal Rotary Dimmer
LED, make sure to turn off the power supply to the lights. Follow
these steps for installation:

1. Remove the existing dimmer switch cover plate and switch.

2. Connect the Odace – Connected Universal Rotary Dimmer LED to
   the wires according to the wiring diagram provided in the user
   guide.

3. Attach the device to the wall using the screws provided.

4. Replace the cover plate and turn on the power supply.

Usage Instructions

Once installed, use the Odace – Connected Universal Rotary
Dimmer LED to adjust the brightness of your LED lights. Follow
these steps:

1. Turn on the lights using the switch.

2. Rotate the knob on the Odace – Connected Universal Rotary
   Dimmer LED to adjust the brightness of the lights.

3. For remote control via a smartphone app, download and install
   the app from the app store. Follow the app instructions to connect
   the device to your smartphone.

Make sure to follow all safety instructions and guidelines
provided in the user guide for safe and proper usage of the Odace –
Connected Universal Rotary Dimmer LED.

Odace – Connected Universal Rotary Dimmer LED
Device user guide
Information about features and functionality of the device. 01/2023
www.se.com

Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for informational use only. No part of this guide may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide or its content, except for a non-exclusive and personal license to consult it on an “as is” basis. Schneider Electric products and equipment should be installed, operated, serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this material or consequences arising out of or resulting from the use of the information contained herein.

Table of Contents
Safety information……………………………………………………………………………4 Odace – Connected Universal Rotary Dimmer LED …………………………5
For your safety ……………………………………………………………………………….5 About the device……………………………………………………………………………..6 Installing the device …………………………………………………………………………6 Quick Home Connect……………………………………………………………………….7
About Quick Home Connect………………………………………………………….7 Pairing the device in Quick Home Connect ………………………………………7 Operating a dimmer ……………………………………………………………………9 Resetting the device in Quick Home Connect………………………………….10 LED indications in Quick Home Connect………………………………………..10 Troubleshooting in Quick Home Connect ……………………………………….10 Pairing the device with Wiser Hub …………………………………………………….. 11 Configuring the device ……………………………………………………………………12 Setting the device location ………………………………………………………….12 Renaming the device ………………………………………………………………..12 Identifying the device ………………………………………………………………..13 Setting RL-LED mode ……………………………………………………………….13 Setting the brightness level …………………………………………………………14 Removing the device from Wiser system …………………………………………….14 Resetting the device ………………………………………………………………………15 Using the device……………………………………………………………………………15 Switching/Dimming the device manually ………………………………………..15 Adjusting the brightness level using app ………………………………………..16 Turning On/Off device using app ………………………………………………….16 Setting up a schedule………………………………………………………………..17 Moments ………………………………………………………………………………..18 Automation …………………………………………………………………………….. 20 LED Indication………………………………………………………………………………25 Troubleshooting ……………………………………………………………………………26 Technical Data ……………………………………………………………………………..27 Compliance …………………………………………………………………………………. 28 Compliance information for Green Premium products ……………………….28 Trademarks …………………………………………………………………………….28

DUG_Odace Rotary Dimmer_WH-01

3

Safety information

Safety information

Important information
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that accompany this symbol to avoid possible injury or death.

DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. Failure to follow these instructions will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.

4

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED
Odace – Connected Universal Rotary Dimmer LED

S5X0513W
For your safety
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Safe electrical installation must be carried out only by skilled professionals. Skilled professionals must prove profound knowledge in the following areas: – Connecting to installation networks. – Connecting several electrical devices. – Laying electric cables. – Safety standards, local wiring rules and regulations. Failure to follow these instructions will result in death or serious injury.
DANGER
RISK OF FATAL INJURY FROM ELECTRIC SHOCK The output may carry electric current even when the load is switched Off. Disconnect the device from the supply by means of the fuse in the incoming circuit before working on the device. Failure to follow these instructions will result in death or serious injury.
CAUTION
THE DEVICE MAY BE DAMAGED Only connect dimmable load. Failure to follow these instructions can result in injury or equipment damage.

DUG_Odace Rotary Dimmer_WH-01

5

About the device

Odace – Connected Universal Rotary Dimmer LED

The Connected Universal Rotary Dimmer LED (hereinafter referred to as dimmer) has a rotary knob that can be used to switch and dim ohmic, inductive or capacitive loads manually or remotely.

Control options
Home control: To control the dimmer through the Wiser app you will need the Wiser Hub. Direct operation: The dimmer can always be controlled directly on- site. You can also connect any number of mechanical push buttons.

Functions

· The device can detect the load automatically · It provides thermal protection, overload-resistance and short-circuit protection

Installing the device
Refer to the installation instructions supplied with this product.

6

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED
Quick Home Connect
About Quick Home Connect
Quick Home Connect is your starting point for wireless home automation. It performs functions like switching, dimming and shutter control using a Connected Wireless Switch (hereinafter referred to as Wireless switch) via a Zigbee network.
IMPORTANT: Applicable only for products sold as a part of Quick Home Connect kits. Quick Home Connect is a wireless connectivity solution for Zigbee devices without the need for a Hub or smartphone application.
The Wireless switch is a battery-powered wireless push-button switch that is used to control Zigbee devices (such as light or shutter) within the same Zigbee network.

Supported devices
· Connected Universal Rotary Dimmer (Rotary dimmer) · Connected Blind Control Switch (Blind control) · Connected Single Socket Outlet (Socket outlet)
Pairing the device in Quick Home Connect
The Wireless switch can be paired with the supported devices in the list. Refer to Supported devices, page 7.
Preparing the devices:
It is necessary to prepare the devices before pairing. On certain devices the status LED is not directly visible.

DUG_Odace Rotary Dimmer_WH-01

7

Odace – Connected Universal Rotary Dimmer LED 1. Remove the rocker of the Wireless switch.

· Make sure the Wireless switch is aligned correctly to identify the pairing buttons.

1-gang wireless switch: Pairing button (A)

2-gang wireless switch: Pairing button for the right channel (A)

2-gang wireless switch: Pairing button for the left channel (B)

B

A

NOTE: The Wireless switch is configured for 1-gang operation by default. To switch from 1-gang to 2-gang operation, refer to Switching from 1-gang to 2-gang.
2. Remove the knob of the Rotary dimmer.

Pairing Wireless switch with Rotary dimmer
To pair the Wireless switch to the Rotary dimmer, you must put the Wireless switch and the Rotary dimmer into pairing mode.
NOTE: The pairing mode will be active for about a minute.
1. Short press the push-button (A) 5 times in quick succession on the Wireless switch. The status LED blinks green.

3

1

5 × < 0,5 s
A

PRESS CR2032

4

2

8

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED
2. Short press the push button of the Rotary dimmer 5 times in quick succession. The status LED blinks green.

5 × < 0,5 s

The light connected to the Rotary dimmer blinks for a few times. The status LED stops blinking green on the Wireless switch and the Rotary dimmer. The Rotary dimmer can now be controlled by the Wireless switch.
3. Assemble the rocker (A) and rotary knob (B) on the Wireless switch (A) and the Rotary dimmer (B), respectively.

A

B

PRESS CR2032

Operating a dimmer
You can switch the dimmer on/off or adjust its brightness using the Wireless switch.
· Short press the top (+) or bottom (v-) Wireless switch (< 0,5 s) to turn On or Off the dimmer.
· Long press the top (+) or bottom (v-) Wireless switch (> 0,5 s) to increase or decrease the brightness of the dimmer.

< 0,5 s

0,5 s

DUG_Odace Rotary Dimmer_WH-01

9

Odace – Connected Universal Rotary Dimmer LED
Resetting the device in Quick Home Connect
It is necessary to reset the devices in the following scenarios: · Unpair the device in Quick Home Connect Refer to Resetting the Wireless switch. Refer to Resetting the Rotary dimmer, page 15. When reset is done successfully. The Wireless switch and device returns to factory default. · Revert the Wireless switch from 2-gang to 1-gang operation. · Integrating into Wiser System If you wish to integrate the devices into Wiser System, reset all the devices in Quick Home Connect and refer to Pairing the device with Wiser Hub, page 11 .

LED indications in Quick Home Connect

Pairing the device in Quick Home Connect

User Action
Press the push button 5 times in quick succession.

LED Indication LED blinks green, once per second.

Status
Pairing mode is active for 60 seconds. When pairing is completed, LED stops blinking.

Troubleshooting in Quick Home Connect

Symptom

Possible cause

Solution

LED displays amber in Rotary dimmer.

Pairing not completed and returned to factory reset.

Pair the Wireless switch and the device again. Refer to Pairing the Wireless switch with Rotary dimmer, page 8 .

The Wireless switch and the device are too far away from each other.

Place the Wireless switch in a position closer to the device.

Wireless switch not able to control the device reliably.

The Wireless switch lost pairing or battery drained.

Pairing different devices like Rotary dimmer and Blind control to the same channel of the Wireless switch.

· Pair the device again. Refer to Pairing the Wireless switch with Rotary dimmer, page 8.
· Replace the battery of the Wireless switch.
Reset the Wireless switch and pair the devices again with different channels. Refer to Reset the Wireless switch and Pairing the device in Quick Home Connect.

Scenario
Central control of multiple devices with Wireless switch. (Applicable only for users with multiple Home Connect kits).

Procedure
If you wish to have a centralized control with a single Wireless switch, first pair the central control Wireless switch with devices and then pair the other Wireless switch with the remaining devices.

10

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED
Pairing the device with Wiser Hub
Using the Wiser Home app, pair your dimmer with the Wiser Hub to access and control the dimmer. Follow the steps to pair the dimmer:
1. On the Home page, tap icon. 2. Tap Devices > icon and Lights > Rotary Dimmer > Next.
NOTE: The next screen shows the joining process of the dimmer. 3. Remove the knob and short-press the push button 3 times and make sure
that the LED blinks amber.
3× < 0,5 s
4. Wait for a few seconds until the LED turns green. You can also see in the app that the device is joined. NOTE: If the LED is blinking green and red, see the instructions by tapping the link LED blinking green and red?.
Rotary Dimmer Setup Press the centre of the device three times rapidly. The LED will start blinking amber.
x3
LED blinking green and red? Device joined
5. Tap Next to enter the name of the device and assign the device to a new room or an existing room. The dimmer is now listed on the Home page under the All and Room tabs.

DUG_Odace Rotary Dimmer_WH-01

11

Configuring the device

Odace – Connected Universal Rotary Dimmer LED

Setting the device location

Using the Wiser Home app, add the dimmer to any room (such as living room, bedroom, kitchen etc).

1. On the Home page, tap icon.
2. Tap Devices > Lights > Rotary Dimmer > Location (A) to assign the dimmer to an existing room or a new room (B) and tap Submit. NOTE: Dimmer is the name given to the device by the user. Any name can be assigned when pairing with the Wiser Hub.

Device Details Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

?

Minimum Brightness

Maximum Brightness

ABOUT Firmware Version

Identify Delete

Rotary Dimmer Setup Where does this device control? New room name

B A

Living Room 3 Devices
Kitchen 2 Devices
Bathroom 3 Devices

Bedroom 2 Devices

Submit

Renaming the device
Rename the dimmer using the Wiser Home app. 1. On the Home page, tap icon. 2. Tap Devices > Lights > Rotary Dimmer > Device Name (A) to rename the dimmer.
Device Details Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

?

Minimum Brightness

Maximum Brightness

ABOUT Firmware Version

Identify Delete

A

12

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED
Identifying the device
Using the Wiser Home app, identify the dimmer among the devices available in a home.
1. On the Home page, tap icon. 2. Tap Devices > Lights > Rotary Dimmer > Identify (A).
Device Details Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

?

Minimum Brightness

Maximum Brightness

ABOUT Firmware Version

Identify Delete

A

The status LED blinks red and connected lighting devices blinks On/Off, upon successful identification of the dimmer.
3. Tap OK to finish identifying the dimmer.

Setting RL-LED mode
You can change the dimming mode in the app if you have problems with light flickering. By changing the dimming mode, the dimming quality is also improved.
1. On the Home page, tap . 2. Tap Devices > Lights > Rotary Dimmer. 3. Tap the toggle switch (A) to enable the RL-LED Mode.
NOTE: · Refer to Technical Data, page 27 for more information. · Manual operation (Optional): Remove the knob of the Rotary dimmer and press the push- button 14 times. If the status LED blinks 3 times in green, RL-LED mode is enabled. If the status LED blinks once in green, Auto mode is enabled.
Device Details Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

?

Minimum Brightness

Maximum Brightness

ABOUT Firmware Version

Identify Delete

A

DUG_Odace Rotary Dimmer_WH-01

13

Odace – Connected Universal Rotary Dimmer LED
Setting the brightness level
If the dimmer is connected to an LED, the minimum and maximum brightness should be set to avoid flickering and switching off the LED.
1. On the Home page, tap icon. 2. Tap Devices > Lights > Rotary Dimmer . 3. Drag the slider bar to increase or decrease the Minimum Brightness and
Maximum Brightness (A).
Device Details Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

?

Minimum Brightness

Maximum Brightness

ABOUT Firmware Version

Identify Delete

A

Removing the device from Wiser system
Using the Wiser app, you can remove the dimmer from the system. Follow the steps to remove the dimmer:
1. On the Home page, tap icon.
2. Tap Devices > Lights > Rotary Dimmer > Delete (A). NOTE: · Removing the device will reset the dimmer. After reset the LED turns amber indicating that the dimmer is ready for pairing. · If there is a problem while pairing or resetting the dimmer, refer to Resetting the device, page 15 .
Device Details Rotary Dimmer

OPTIONS

Device Name

Location

RL-LED Mode

?

Minimum Brightness

Maximum Brightness

ABOUT Firmware Version

Identify Delete

A

14

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED
Resetting the device
You can reset the dimmer to factory default manually. Remove the knob and short-press the push button 3 times (<0.5 s) and then longpress the push button once (>10 s). The LED blinks red after 10 s, and then release the push button. Upon successful reset, the LED stops blinking. Then, the dimmer restarts and blinks green for a few seconds.
NOTE: After reset, the LED turns amber indicating that it is ready for pairing.

3× < 0,5 s +1× > 10 s
Using the device
Switching/Dimming the device manually
You can manually turn on/off the dimmer and increase/decrease brightness level. This will provide power to the load connected to it. To turn on or off the dimmer, short-press the push button (< 0,5 s).
< 0,5 s To increase brightness, turn the dimmer knob clockwise, and to decrease brightness, turn it anti-clockwise.

DUG_Odace Rotary Dimmer_WH-01

15

Odace – Connected Universal Rotary Dimmer LED
Adjusting the brightness level using app
By using the Wiser Home app, increase/decrease the brightness level in the dimmer. Follow the steps to increase/decrease the brightness level:
1. Go to the Home page, tap All and find the device. 2. On the control panel page, drag the sliding bar up/down to increase/decrease
the brightness (A). TIP: You can also turn On/Off the dimmer on the control panel page, tap (B) icon to turn On/Off dimmer.
Dimmer
B A
1%

Create or assign a schedule Device settings

Turning On/Off device using app
Using the Wiser Home app, you can turn On/Off the dimmer remotely. Follow the steps to turn On/Off the dimmer using the app:
1. Go to the Home page, tap All and find the device. 2. Tap (A) icon to turn On/Off dimmer.

18°
Plymouth

07:05 21:35

All Living Room Kitchen Bedroom

Living Room

Dimmer

A

Home

Automations

Energy

16

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED

Setting up a schedule

The dimmer can be fully controlled by schedule. Once the schedule is set, the dimmer operates at a given time. Follow the steps to create a schedule:

1. On the Home page, tap icon.

2. Go to Schedules > icon to create a schedule. 3. Enter the name of the schedule (A). 4. In the TYPE menu, select Lights (B). 5. In the APPLIES TO menu, select Dimmer (C) from the listed devices.

NAME

New Schedule

Schedule name

A

TYPE

Lights Shutters

APPLIES TO Dimmer

B C

Create
6. Tap Create to setup events. 7. Tap icon to add an event such as STATE (lights Off or dimming level in %)
and WHEN ( sunrise/sunset or specific time range). 8. Tap Set to save the schedule.

DUG_Odace Rotary Dimmer_WH-01

17

Moments

Odace – Connected Universal Rotary Dimmer LED
Moment allows you to group multiple actions that are usually performed together. By using the Wiser Home app, you can create moments based on your needs.

Creating a moment

Follow the steps to create a moment:

1. On the Home page, tap icon.

2. Go to Moments and then tap icon to create a moment. 3. Enter the name of the moment (A).
TIP: You can choose the cover image that represents your moment by tapping icon. 4. Tap Add actions (B) to select the list of devices.

Close

Moment Creator

Save

Name e.g. Movie Night

A

Actions

Add actions

0 of 60
B

5. In the Add actions menu, you can select the devices (C).

Select devices
Please select the devices you want to add to this moment.

All Test Three Test

Heating

Rotary dimmer

Shutter Three
Push button dimmer Light
Light

C

Done

6. Once all the device are selected, tap Done.

18

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED

7. On the Moment creator page, tap on the device to set the condition:
­ Tap to turn on (D)
­ Drag the sliding bar up/down to increase/decrease the brightness (E) and tap Set in the upper right corner.

Dimmer

Set

D

Tap to turn on

E

8. Once all conditions are set, tap Save. Once the moment is saved, it is visible on the Moments tab. You can tap on the moment to enable it.

Editing a moment

To edit a moment: 1. On the Home page, tap .

2. Go to Moments, locate the moment you want to edit and tap (A). 3. On the Moment Editor page, you can tap each item to change the settings
and tap Save (B).

Automations

Moments

Automations Schedules

Away Mode

Cancel all overrides

Boost All

Moments

A

Movie+Night+

Close

Moment Editor

Movie+Night+

B Save

Actions Light

1 of 60 On

Home

Automations

Energy

Add actions Delete

DUG_Odace Rotary Dimmer_WH-01

19

Odace – Connected Universal Rotary Dimmer LED

Deleting a moment

To delete a moment: 1. On the Home page, tap . 2. Go to Moments, locate the moment you want to delete and tap (A). 3. On the Moment Editor page, tap Delete (B) and tap Ok.

Automations

Moments

Automations Schedules

Away Mode

Cancel all overrides

Boost All

Moments

A

Movie+Night+

Close

Moment Editor

Save

Movie+Night+

Actions Light

1 of 60 On

Home

Automations

Energy

Add actions Delete

B

Automation

An automation allows you to group multiple actions that are usually done together, triggered automatically or at scheduled times. By using the Wiser app, you can create automations based on your needs. This example demonstrates how a device works when the condition is met.

Creating an automation

Follow the steps to create an automation:
1. On the Home page, tap icon.
2. Go to Automation and then tap icon to create an automation. 3. Enter the name of the automation (A) .
TIP: You can choose the cover image that represents your automation by tapping icon.

Close

New automation

Evening movie

Save
A

If

When

Conditions are met

All conditions

Then 0 of 10 Any condition

Start by adding a condition that will trigger your automation
Add conditions

20

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED

4. Tap Add a condition (B).
NOTE:
· A Condition will be set to trigger an Automation for example when the shutter is opened, or the motion sensor is detecting the movement.
· You can add one condition to an automation; to add another condition, you must create another automation.

Close

New automation

Save

Evening movie

If

When

Conditions are met

All conditions

Then 0 of 10 Any condition

Start by adding a condition that will trigger your automation

Add conditions

B

5. Select a device that will set the condition.
Select devices Please select the devices you want to add to this moment. All Living Room Kitchen Bedroom Living Room
Smart Socket
Radiator Bedroom
Blind control switch Kitchen
Dimmer
Relay switch

6. Select the state of the device that will trigger the automation, for example relay switch On/Off.

Relay Switch

Set

Tap to turn on

7. Tap Set on the upper right corner. TIP: If you want to change the condition, swipe it to the left and tap the bin icon. Then add a new condition with the required parameters.
8. Tap Action> Add an action. NOTE: You can add one action in an automation; to add another action, you must create another automation.

DUG_Odace Rotary Dimmer_WH-01

21

Odace – Connected Universal Rotary Dimmer LED

9. Select the type of action: ­ Control a device – Select the device and set the desired state of the device. ­ Send notification – You will be notified if the condition is met. ­ Activate a moment – Select a Moment. For this example, we will choose Control a device.

Back

Add actions

Please choose an action for your automation.

Control devices
E.g. turn the light on

E.g. if motion is detected
Activate a moment
E.g. enable Away Mode

10. Select Dimmer (D) as a device that will trigger an action.

Select devices
Please select the devices you want to add to this moment.
All Living Room Kitchen Bedroom Living Room
Smart Socket

Radiator Bedroom
Blind control switch Kitchen
Dimmer
Relay switch

D

11. Set the state, for example increase/decrease the dimmer brightness or turning On/Off the dimmer. Then tap Set on the upper right corner.

Relay Switch

Set

Dimmer

Set

Tap to turn on

On

OR

22

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED
12. Tap Save. The saved Automation is displayed on the Automation page. Tap the toggle switch (E) on the Automation page to enable/disable the Automation.

Editing an automation

Follow the steps to edit an automation: 1. On the Home page, tap . 2. Go to Automation, tap the automation you want to edit (A).

Automation

Moments

Automations

Automations

A

Evening movie

Schedules

Home

Automations

Energy

3. On the Edit automation page, you can: ­ Change the icon. ­ Rename the automation. ­ Change the condition or action.

DUG_Odace Rotary Dimmer_WH-01

23

Odace – Connected Universal Rotary Dimmer LED

4. Remove the Condition or Action by swiping it to the left and tapping the bin icon (B).

Close

Edit automation

Save

Evening movie

If

When

Conditions are met

All conditions

Then 1 of 10 Any condition

exactly %

B

Add conditions Delete automation

5. Add a new condition or action and then tap Save.

Deleting an automation

Follow the steps to delete an automation: 1. On the Home page, tap . 2. Go to Automation, tap the automation you want to delete (A).

Automation

Moments

Automations

Automations

A

Evening movie

Schedules

Home

Automations

Energy

3. On the Edit automation page, tap Delete Automation (B) and tap Ok.

Close

Edit automation

Save

Evening movie

If

When

Conditions are met

All conditions

Then 1 of 10 Any condition

Load 14 Living room

exactly %

Add conditions Delete automation

B

24

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED

LED Indication

Pairing
User Action Press the push button 3 times

LED Indication LED blinks amber per second.

Status
Pairing mode is active for 30 seconds. When pairing is completed, LED glows green for some time before turning Off.

Resetting
User Action Press the push button 3 times and hold it down once for > 10 s.

LED Indication After 10 s, the LED blinks red.

Status
The device is in reset mode. It is reset to the factory settings after 10 seconds. The device then restarts and the LED blinks green for a few seconds and then stays amber.

Identifying the device
LED Indication The LED blinks red.
Different connectivity mode
LED Indication The LED blinks green and red while paring.

Status The connected lighting devices blinks On/Off, upon successful identification of the dimmer
Status The device is trying to connect to other connectivity mode. Short-press the push button 3 times and then hold for 20 seconds. When the LED blinks red rapidly, release the push button.

3× < 0,5 s +1× > 20 s

DUG_Odace Rotary Dimmer_WH-01

25

Troubleshooting

Odace – Connected Universal Rotary Dimmer LED

Symptom Dimming up not possible. Switching On not possible.
Flickering at minimum brightness.
Flickering Only slight dimming capability The device is not ready to pair after the device is removed from the app.

Solution
· Reduce/increase load. · Allow the Dimmer to cool in case of overheating. · Change the load (if the load is incompatible with the Dimmer).
· Allow the Dimmer to cool in case of overheating. · Reduce load. · Change load. · Check wiring between the push button and the Dimmer.
· Increase minimum brightness (if flickering still persists, install a 31LCDA load correction device).
· Change the load (if the minimum brightness is insufficient). · Set to RL LED mode, page 13.
· Change load. · Set to RL LED mode, page 13. · Change the brightness settings.
· Change dimming range. · Set to RL LED mode., page 13 · Change the load (if the load is incompatible with the Dimmer).
Reset to factory default settings, refer to Resetting the device, page 15.

26

DUG_Odace Rotary Dimmer_WH-01

Odace – Connected Universal Rotary Dimmer LED
Technical Data

Nominal voltage Nominal power

AC 230 V ~, 50 Hz Load type

LED

Load name LED
Iron core transformer
Incandescent lamp Halogen lamp

Load value

7­100 VA

RC

7­20 VA

RL

14­150 VA

RL

14­200 W

R

14­150 W

R

Electronic step-down converter

Standby Neutral conductor Connecting Terminals Extension unit Fuse protection Operating frequency Max. radio-frequency power transmitted Communication protocol

Max 0.4 W Not required Screw terminals for max. 2 x 2.5 mm², 0.5 Nm Single Push-button, unlimited number, max. 50 m 16 A circuit breaker 2405 – 2480 MHz < 10 mW
Zigbee 3.0 certified

14­150 VA

RC

DUG_Odace Rotary Dimmer_WH-01

27

Compliance

Odace – Connected Universal Rotary Dimmer LED

Compliance information for Green Premium products
Find and download comprehensive information about Green Premium products, including RoHS compliance and REACH declarations as well as Product Environmental Profile (PEP) and End-of-Life instructions (EOLI).

General information about Green Premium products
Click the link below to read about Schneider Electric’s Green Premium product strategy. https://www.schneider-electric.com/en/work/support/green-premium/

Find compliance information for a Green Premium product
Click the link below to search for a product’s compliance information (RoHS, REACH, PEP and EOLI).
NOTE: You will need the product reference number or product range to perform the search. https://www.reach.schneider-electric.com/CheckProduct.aspx?cskey= ot7n66yt63o1xblflyfj

Trademarks

This guide makes reference to system and brand names that are trademarks of their relevant owners.
· Zigbee® is a registered trademark of the Connectivity Standards Alliance.
· Apple® and App Store® are brand names or registered trademarks of Apple Inc.
· Google PlayTM Store and AndroidTM are brand names or registered trademarks of Google Inc.
· Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
· WiserTM is a trademark and the property of Schneider Electric, its subsidiaries and affiliated companies.
Other brands and registered trademarks are the property of their respective owners.

28

DUG_Odace Rotary Dimmer_WH-01

Schneider Electric 35 rue Joseph Monier 92500 Rueil Malmaison France + 33 (0) 1 41 29 70 00 www.se.com
As standards, specifications, and design change from time to time, please ask for confirmation of the information given in this publication.
© 2023 ­ Schneider Electric. All rights reserved. DUG_Odace Rotary Dimmer_WH-01

References

• download.schneider-electric.com/files?p_Doc_Ref=S5x0513W_HW
• Replacing the battery - Wiser Home
• Resetting the device - Wiser Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>