BaByliss C459E Hair Strainer User Guide

: June 10, 2024
: BaByliss

Table of Contents

C459E Hair Strainer
Switch Activation Control
HOW TO USE
Heat Settings
Auto Shut Off
CARE & MAINTENANCE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

C459E Hair Strainer

BaByliss C459E Hair Strainer User Guide

C459E Hair Strainer

Read the safety instructions first.
WARNING! Take care to avoid the hot surface of the appliance coming into direct contact with the skin, in particular the eyes, ears, face and neck.
WARNING! Do not touch the hot barrel or metal parts of the appliance whilst hot.

Switch Activation Control

IMPORTANT! This appliance features delayed activation control.
Immediately after turning the appliance on, you are able to adjust the temperature settings. After 5 seconds of the appliance being on, the temperature buttons will automatically lock. To adjust the heat settings, hold down the ‘+/-‘ button for 1-2 seconds. This will deactivate the lock mode and allow the settings to be changed. To turn off the appliance whilst in lock mode, hold down the button marked until the appliance switches off.

HOW TO USE

Ensure the hair is dry and combed through to remove any tangles. Divide the hair into sections ready for styling.
Press and hold the button marked ‘ ’ for 1-2 seconds to turn the appliance on. The digital display will start flashing and the appliance will automatically start heating up.
Press the ‘+/-‘ button to select a heat setting suitable for your hair type. The digital display will flash until the desired heat setting has been reached. Once the temperature has been reached, the digital display will remain solid in colour.

Please note: The appliance temperature settings will lock automatically after 5 seconds. (See Switch Activation Control).

Pressing the lever, place the appliance midway up a section of hair and spread the hair evenly between the lever and barrel.
Once the hair is in place, carefully release the lever, securing the hair between the lever and the barrel. Gently slide the appliance down to the end of the hair.
Wind the hair around the barrel at a slight angle, so the hair wraps around the barrel in a spiral motion. As you wind the hair around the barrel, try not to overlay the hair and ensure the hair is distributed evenly so the entire section is touching the barrel.
Hold in place for 5-8 seconds, depending on your hair type.
To remove the appliance from the hair, press the lever and pull the appliance away.
Allow the curl to cool before styling.
Repeat for each section of hair.
After use, press and hold the ‘ ’ button to switch off and unplug the appliance.
Allow the appliance to cool before storing away.

Heat Settings

If you have delicate, fine, bleached or coloured hair, use the lower heat settings. For thicker hair, use the higher heat settings. It is suggested to always complete a test on initial use to ensure the correct temperature is used on the hair type. Start on the lowest setting and increase the temperature until the desired result is achieved.
There are 6 temperature settings to select from; 160°C, 170°C, 180°C, 190°C, 200°C and 210°C.

Auto Shut Off

This appliance has an automatic shut off feature for added safety. If the appliance is switched on for more than 60 minutes continuously, it will automatically switch off. If you wish to continue using the appliance after this time, simply press and hold the ‘ ’ button for 1-2 seconds to turn the power on again.

Heat Mat
The appliance comes with a heat mat for use during and after styling.
During use, do not place the appliance on any heat sensitive surface, even when using the heat mat provided. After use, switch off and unplug the appliance. Immediately wrap the appliance in the heat mat provided and allow to fully cool down. Continue to keep it out of reach of children, as it will remain hot for several minutes.

CARE & MAINTENANCE

To help keep your appliance in the best possible condition, please follow the steps below:

Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
Do not use the appliance at a stretch from the power point.
Always unplug after use.

Made in China
C459E-F94s
BABYLISS SARL
ZI du Val de Calving
59141 Iwi France
www.babyliss.com
FAC 2022/07