Simpson Strong-Tie CDT10S Adhesive Dispensing Tools Instruction Manual
- June 10, 2024
- Simpson Strong-Tie
Table of Contents
- Simpson Strong-Tie CDT10S Adhesive Dispensing Tools
- Product Information
- Product Usage
- Adhesive Dispensing Tools
- SET-3G™ High-Strength Epoxy Adhesive
- SET-XP® High-Strength Epoxy Adhesive
- ET-HP® Epoxy Adhesive
- SET Epoxy Adhesive
- Adhesive Nozzle Accessories
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Simpson Strong-Tie CDT10S Adhesive Dispensing Tools
Product Information
The product is a range of Anchoring, Fastening Systems, and Restoration Solutions for Concrete and Masonry. The range includes Adhesive Accessories, Adhesive Anchors, and Adhesive Dispensing Tools. The Adhesive Dispensing Tools are heavy-duty and designed to work with the cartridges for trouble-free dispensing. There are four types of manual dispensing tools available: CDT10S Manual Dispensing Tool for Single Cartridge Adhesives, EDT22S Manual Dispensing Tool for 22 oz. Adhesive Cartridges, EDTA22CKT Battery-Powered Dispensing Tool for 22 oz. Cartridges, and EDTA22P Pneumatic Dispensing Tool for 22 oz. Cartridges. The range also includes a pneumatic dispensing tool for 56 oz. cartridges. The SET-3GTM High-Strength Epoxy Adhesive is an adhesive cartridge system that comes in two models: SET3G101 (8.5 ounces) and SET3G22-N1 (22 ounces). The cartridges are available in coaxial and side-by- side types.
Product Usage
The Adhesive Dispensing Tools are designed to work with the cartridges for
trouble-free dispensing. The CDT10S Manual Dispensing Tool is used for single
cartridge adhesives, while the EDT22S Manual Dispensing Tool is used for 22
oz. adhesive cartridges. The EDTA22CKT Battery-Powered Dispensing Tool is used
for 22 oz. cartridges and does not require a hose or compressor.
The tool can be easily converted from dispensing a 22 oz., 1:1 ratio cartridge
to a 16.5 oz., 2:1 ratio cartridge. The EDTA22P Pneumatic Dispensing Tool is
used for 22 oz. cartridges, and the EDTA56P Pneumatic Dispensing Tool is used
for 56 oz. cartridges.
The recommended operating air pressure for pneumatic tools is between 80 and
100 psi.
The SET-3GTM High-Strength Epoxy Adhesive is an adhesive cartridge system that comes in two models: SET3G101 (8.5 ounces) and SET3G22-N1 (22 ounces). The cartridges are available in coaxial and side-by-side types. One EMN21I mixing nozzle and one extension are supplied with each cartridge. Cartridge estimation guidelines are available at strongtie.com/apps.
The SET-3G Cure Schedule indicates the gel time and cure time for different
concrete temperatures. The gel time for concrete temperature of 40 degrees
Fahrenheit is 4 minutes, and the cure time is 120 hours. The gel time for
concrete temperature of 50 degrees Fahrenheit is 10 minutes, and the cure time
is 75 hours.
Maintenance tips, troubleshooting, and repair parts schematics are available
at strongtie.com.
Adhesive Dispensing Tools
Our heavy-duty tools are designed to work with our cartridges for trouble-free dispensing. Each manual tool provides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive
CDT10S
Manual Dispensing Tool for Single Cartridge Adhesives The CDT10S features a
steel carriage for ultimate durability and is engineered for continuous, high-
volume use, as well as double-gripping plates that help extend tool life.
EDT22S
Manual Dispensing Tool for 22 oz. Adhesive Cartridges The EDT22S epoxy
adhesive tool features a steel carriage and is engineered for high-volume,
continuous use. The tool can be easily converted (conversion parts included)
from dispensing a 22 oz., 1:1 ratio cartridge to a 16.5 oz., 2:1 ratio
cartridge.
EDTA22CKT
Battery-Powered Dispensing Tool for 22 oz. Cartridges The EDTA22C offers power
dispensing of 22 oz., 1:1 ratio, dual-cartridge adhesives without the need for
a hose or compressor. The 18V lithium-ion battery is 50% lighter than NiCad
and offers 40% longer run time and 30-minute recharging. Tool converts to
dispense 16.5 oz., 2:1 ratio dual-cartridge adhesives (conversion parts
included).
The EDTA22CKT comes with the dispensing tool, two 18V lithium-ion battery
packs and a charger.
EDTA22P
Pneumatic Dispensing Tool for 22 oz. Cartridges The EDTA22P tool features an
optional suitcase handle adapter for the ultimate in tool configuration and
dispensing convenience, enabling easier and time-saving groundlevel doweling.
The heavy-duty tool comes with a custom, blow-molded plastic carrying case.
EDTA56P
Pneumatic Dispensing Tool for 56 oz. Cartridges The EDTA56P tool features an
optional suitcase handle adapter for the ultimate in tool configuration and
dispensing convenience, enabling easier and time-saving ground-level doweling.
The heavy-duty tool comes with a custom, blow-molded plastic carrying case.
Description Model No.
Premium tool for single-tube cartridges| CDT10S
Manual tool for 22 oz. cartridges| EDT22S
Replacement 14.4V battery (ea.)| EDT14B
Battery-powered tool for 22 oz. cartridges| EDTA22CKT
Pneumatic tool for 22 oz. cartridges1, 2| EDTA22P
Pneumatic tool for 56 oz. cartridges1, 2| EDTA56P
- Air supply attachment is 1⁄4 –18 NPT (male) thread.
- Recommended operating air pressure is between 80 and 100 psi.
Maintenance tips, troubleshooting and repair parts schematics available at strongtie.com.
SET-3G™ High-Strength Epoxy Adhesive
SET-3G Adhesive Cartridge System
Model No.| Capacity (ounces)| Cartridge Type| Carton Quantity| Dispensing
Tool(s)| Mixing Nozzle
---|---|---|---|---|---
SET3G101
|
8.5
|
Coaxial
|
12
|
CDT10S
|
EMN22I
SET3G22-N1
|
22
|
Side-by-side
|
10
| EDT22S, EDTA22P, EDTA22CKT|
EMN22I
- One EMN21I mixing nozzle and one extension are supplied with each cartridge.
- Cartridge estimation guidelines are available at strongtie.com/apps.
- Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair SET-3G adhesive performance.
SET-3G Cure Schedule1, 2
| Concrete Temperature Gel Time | Cure Time |
|---|---|
| (°F) (°C) (min.) | (hr.) |
| 40 | 4 |
| 50 | 10 |
| 60 | 16 |
| 70 | 21 |
| 90 | 32 |
| 100 | 38 |
For SI: 1°F = (°C x 9/5) + 32.
- For water-saturated concrete and water-filled holes, the cure times should be doubled.
- For installation of anchors in concrete where the temperature is below 70°F (21°C), the adhesive must be conditioned to a minimum temperature of 70°F (21°C).
SET-XP® High-Strength Epoxy Adhesive
SET-XP Cartridge System
Model No.| Capacity (ounces)| Cartridge Type| Carton Quantity|
Dispensing Tool(s)
| Mixing Nozzle
---|---|---|---|---|---
SET-XP104| 8.5| Single| 12| CDT1OS|
EMN22I
SET-XP22| 22| Side-by-Side| 10| EDT22S, EDTA22P, EDTA22CKT
SET-XP22-N4| 22| Side-by-Side| 10| EDT22S, EDTA22P, EDTA22CKT
SET-XP56| 56| Side-by-Side| 6| EDTA56P
- Cartridge estimation guidelines are available at strongtie.com/apps.
- Detailed information on dispensing tools, mixing nozzles and other adhesive accessories is available at strongtie.com.
- Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair SET-XP adhesive performance.
- One EMN22I mixing nozzle and one nozzle extension are supplied with each cartridge.
Cure Schedule
Base Material Temperature Gel Time Cure Time
°F °C (minutes) (hrs.)
50| 10| 75| 72
60| 16| 60| 48
70| 21| 45| 24
90| 32| 35| 24
110| 43| 20| 24
For water-saturated concrete, the cure times must be doubled.
ET-HP® Epoxy Adhesive
ET-HP Package Systems
Model No.| Capacity (ounces)| Package Type| Carton Quantity| Dispensing Tools|
Mixing Nozzle
---|---|---|---|---|---
ET-HP22-N4| 22| Side-by-side| 10| EDT22S| EMN22I
ET-HP22| 22| Side-by-side| 10| EDT22CKT| EMN22I
- Cartridge estimation guidelines are available at strongtie.com/apps.
- Detailed information on dispensing tools, mixing nozzles and other adhesive accessories is available at strongtie.com.
- Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair ET-HP adhesive performance.
- One EMN22i mixing nozzle and one nozzle extension are supplied with each cartridge.
Cure Schedule
Base Material Temperature
°F °C
|
Gel Time (minutes)
|
Cure Time1 (hrs.)
---|---|---
50| 10| 45| 72
60| 16| 30| 24
80| 27| 20| 24
100| 38| 15| 24
- For water-saturated concrete, the cure times must be doubled.
SET Epoxy Adhesive
SET Cartridge System
Model No.| Capacity (ounces)| Cartridge Type| Carton Quantity| Dispensing
Tools| Mixing Nozzle
---|---|---|---|---|---
SET22| 22| Side-by-side| 10| EDT22S, EDTA22CKT EDTA22P| EMN22I
SET22-N4| 22| Side-by-side| 10| EMN22I
- Cartridge estimation guidelines are available at strongtie.com/apps.
- Detailed information on dispensing tools, mixing nozzles and other adhesive accessories is available at strongtie.com.
- Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions. Modification or improper use of mixing nozzle may impair SET adhesive performance.
- One EMN22I mixing nozzle and one nozzle extension are supplied with each cartridge.
Cure Schedule
Base Material Temperature
°F °C
|
Cure Time (hrs.)
---|---
40| 4| 72
65| 18| 24
85| 29| 20
90| 32| 16
For water-saturated concrete (including damp and water-filled holes), the cure times must be doubled.
In-Service Temperature Sensitivity
Base Material Temperature
°F °C
|
Percent Allowable Load
---|---
40| 4| 100%
70| 21| 100%
110| 43| 100%
135| 57| 75%
150| 66| 44%
180| 82| 20%
- Percent allowable load may be linearly interpolated for intermediate base material temperatures.
- °C = (°F–32) / 1.8
Adhesive Nozzle Accessories
EMN22i
An 18-element mixing nozzle with integrated nut for use with 22 oz. and 56 oz.
epoxy adhesive cartridges.
Model Option Package Carton
No. Quantity Quantity
EMN22I
| 18-element nozzle for 22 oz. and 56 oz.epoxy adhesive. Includes integrated threaded nut for attachment to cartridges.|
1
|
12
EMN22I-RP10
| 18-element nozzle for 22 oz. and 56 oz.epoxy adhesive. Includes integrated threaded nut for attachment to cartridges.|
10
|
3
EMN22I-RP5
| 18-element nozzle for 22 oz. and 56 oz.epoxy adhesive. Includes integrated threaded nut for attachment to cartridges.|
5
|
6
EMN22IB
| 18-element nozzle for 22 oz. and 56 oz.epoxy adhesive. Includes integrated threaded nut for attachment to cartridges.|
500
|
500
EMN50
A high-volume nozzle for 22 oz. and 56 oz. epoxy cartridges.
| Model No. | Option | Package Quantity |
|---|
EMN50
| Hi-volume nozzle for 22 oz. and 56 oz. cartridges (separate retaining nut not required), 17″ long, major diameter 7/8″|
10
AMN19Q
A 19-element high-strength static mixing nozzle for use with all acrylic
adhesive products.
| Model No. | Option | Package Quantity | Carton Quantity |
|---|
AMN19Q-RP5
|
Five mixing nozzles for AT-XP® product.
| 5 nozzles per pack|
10