TrafficMaster HT044-197-1818 Mesa Boulder Texture Residential 18 in. x 18 in. Peel and Stick Carpet Tile Instructions
- June 10, 2024
- trafficMaster
Table of Contents
HT044-197-1818 Mesa Boulder Texture Residential 18
in. x 18 in. Peel and Stick Carpet Tile
Instructions
HT044-197-1818 Mesa Boulder Texture Residential 18 in. x 18 in. Peel and
Stick Carpet Tile
SIDE SEAMS
Photo A shows two light color yarns, Photo B shows the results of seaming two
light colors together, a light line.
Photo C shows two dark color yarns, Photo D shows the results of seaming two
dark colors together, a dark line.
Photo E shows the light color yarn keeping the two dark yarns separated. Photo
F shows a correct carpet seam.
This type carpet must be seamed from face side. Use a row finder to find and
separate a row, down the length of the seam.
On one edge leave on the light color yarn and on other edge leave on the dark
color, then pull both edges together and check seam for proper color alignment
and proper seam fit.
If satisfied with seam appearance, apply seam sealer to both cut edges and
allow to dry.
Use a premium quality seam tape to seam pieces together, set thermostat on
iron at 3 to 3 1/2 and follow on seam with a round wheel seam roller, rolling
up and down seam. Now follow with a seam weight weighing no heavier than 10
lbs.
Always move seaming iron in the carpets pile direction and allow seam to
completely cool before stretching.
CROSS SEAMS
Keep cross seams to a minimum. They are best when cut from back of carpet.
Using a straight edge [6 ft.], and carpenter square, adjust straight edge so
that the seam will be straight across width mark on each side either with a
notch cut into the edge or make a mark then snap a white chalk line from side
to side.
Now align the straight edge to the chalk line and cut carpet using a very
sharp razor knife; on piece of carpet with pile laying toward seam, hold razor
knife on a slight angle undercutting the face fibers slightly, other edge cut
straight up and down.
Pull both pieces together and check seam for proper fit, if satisfied with fit
seam, seal both cut edges and allow to dry. Use a premium quality seam tape to
seam edges together, follow by rolling over seam with a round wheel seam
roller and a seam weight no heavier than 10 lbs. to hold seam flat while
cooling. Allow seam to cool completely before stretching.
RECCOMENDATIONS
STYLE NAME: Mesa
STYLE NO. HT044
DATE: 5/7/2014
REVISED DATE: 1/15/2018
Documents / Resources
|
TrafficMaster HT044-197-1818 Mesa Boulder Texture Residential 18 in. x 18 in.
Peel and Stick Carpet
Tile
[pdf] Instructions
HT044-197-1818 Mesa Boulder Texture Residential 18 in. x 18 in. Peel and Stick
Carpet Tile, HT044-197-1818, Mesa Boulder Texture Residential 18 in. x 18 in.
Peel and Stick Carpet Tile, Texture Residential 18 in. x 18 in. Peel and Stick
Carpet Tile, 18 in. x 18 in. Peel and Stick Carpet Tile, Peel and Stick Carpet
Tile, Stick Carpet Tile, Carpet Tile, Tile
---|---