legrand 7 525 66 Connected Switch with Neutral Instruction Manual
- June 10, 2024
- Legrand
Table of Contents
7 525 66 Connected Switch with Neutral
Product Information
The connected switch with neutral is a smart switch that can be controlled via an app or wireless switches. It works with LED bulbs or dimmable bulbs including LEDs in dimmer mode. The pack contents include a gateway power outlet control, a home/away wireless master control, a finishing plate, and a site protection with a dimmer option. The switch operates in default on/off mode and can be switched to dimmer mode via the app. The switch can be wired for two-way light switches with the use of wireless switches.
Product Usage Instructions
- Before starting the installation, switch off the power at the main circuit breaker and make sure that the power is off before continuing with the installation.
- Remove the old switch and wire the connected switch according to the wiring diagram provided in the user manual.
- If wiring for two-way light switches, use only the connected switch with neutral (with dimmer option) and wireless switches for all control points.
- If using dimmer mode, use only dimmable bulbs including LEDs.
- To add the connected product to your installation, follow the instructions in the Home + Control application or consult the user manual on legrand.fr.
Requires you to buy and install the «… with Netatmo» connected starter pack
- Control Modul
- Gateway power outlet control and Home/away wireless Master control
Pack contents
- Connected switch with neutral (with dimmer option)
- Site protection
- Site protection
Before starting : wiring precautions
If you plan to install two-way light switches, read the following precautions
: To control a light with two or more switches, only use the following
products :
Connected switch with neutral (with dimmer option)
- Wireless switches for all control points (not included in this pack)
- up to 20 push but-tons (not included in this pack)
Do not use : two connected switches (with dimmer option) to control the same lighting point.
Characteristics
In default operating mode (on/off), this switch works with the following bulbs
:
(*) For a good lighting comfort, it is recommended to use bulbs of the same
type and the same manufacturer. In dimmer option operating mode (which can be
activated via the App), this switch functions only with dimmable bulbs
(identifiable by the logo on packaging).
Tip if replacing a two-way switch :
old flush-mounted switch replaced by the wireless switch.
Traveller 2
Use a connector to connect all 3 wires together (travelers 1 and 2 and lamp
return wire). Use an other connector for neutral wire.
Necessary safety precautions **
**
- Switch off the power at the main circuit breaker
- Make sure that the power is off before continuing with the installation.
Make sure that the power is off before continuing with the installation.
- Remove the old switch.
Wire the connected switch
The connected light switch (with dimmer option) works with standard bulbs or dimmable bulbs including LEDs. Using dimmable LEDs is mandatory if dimmer mode is activated.
To add a connected product to your connected installation, you should follow the instructions:
- in the Home + Control application (Settings/Add a new product section)
- or consult the user manual on legrand.fr
LEGRAND – Pro and Consumer Service – BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.com
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorized opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand declares that the radio-electric equipment referred to in these
instructions complies with directive 2014/53/EU. The full text of the EU
declaration of conformity is available on the following website :
www.legrandoc.com
References
- Legrand - Spécialiste des infrastructures électriques et numériques du bâtiment
- Welcome to Legrand - Legrand
- Legrand - Spécialiste des infrastructures électriques et numériques du bâtiment
- Legrand E-catalog International | Electrical Ranges of products & Connected Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>