URBAN factory EMR20UF-N 2.4ghz Wireless Vertical Ergonomic Mouse User Guide

June 11, 2024
URBAN factory

URBAN-factory-LOGO

EMR20UF-N 2.4ghz Wireless Vertical Ergonomic Mouse

URBAN-factory -EMR20UF-N 2.4ghz-Wireless-PRODUCT-IMAGE

Product Information

The ERGO Next is a wireless vertical ergonomic mouse that operates on 2.4GHz frequency. It features a built-in 500mAh battery and a USB-C port for charging. The mouse has a vertical position
and offers three levels of DPI resolution (Grade 1: 1000DPI, Grade 2: 1200DPI, Grade 3: 1600DPI). It also has a silent click feature and comes with a USB-A/USB-C adapter.

Product Usage Instructions

Setup / Installation

To set up the ERGO Next, follow these steps:

  1. For Windows computers, connect the USB-A nano receiver to the computer’s USB-A port. For Mac computers, plug the 2.4GHz receiver into a USB-A port.
  2. Windows will automatically launch the installation of the drivers (Plug&Play).
  3. Wait for the Windows confirmation signal.
  4. Your mouse is now ready to use and properly set up.

For USB-C setup, follow these steps:

  1. Connect the USB-A/USB-C adapter onto the USB-A 2.4GHz receiver connector.
  2. Connect the 2.4GHz receiver into your computer’s USB-C port.
  3. Windows will automatically launch the installation of the drivers (Plug&Play).
  4. Wait for the Windows confirmation signal.
  5. Your mouse is now ready to use and properly set up.

Note: Do not use the mouse on a reflective or glass surface.

DPI Adjustment
The button located between the right and left click is used to adjust the DPI resolution. Follow these steps to adjust the DPI:

  • First use: Grade 1: 1000DPI
  • 1 click: Grade 2: 1200DPI
  • 2 clicks: Grade 3: 1600DPI

Note: This function is not supported by Safari.

Charging the Mouse
To charge the ERGO Next, connect the USB-A cable port to a charging device and the other end to the USB-C input connector located on the front of the mouse. After connecting, the mouse will automatically charge and the LED indicator status will turn red (it will turn blue when the battery is charged).

Features

Product appearance

  1. Left click
  2. Right click
  3. Scroll wheel
  4. DPI Adjustment button
  5. USB-C port (to charge)
  6. Non-slip pads
  7. Backward
  8. Forward
  9. On / OFF button
  10. Synchronization button
  11. Dongle slot

Into the box

  • 1* Vertical ERGO mouse
  • 1*USB-A / USB-C adapter
  • 1*User Guide

Setup / Installation

2.4Ghz wireless setup

  1. Connect the USB-A cable connector to your computer’s USB-A port
  2. Windows will automatically launch the installation of the drivers (Plug&Play).
  3. Wait for the WINDOWS confirmation signal.
  4. Your mouse is ready to use and properly setup.
    CAUTION: Do not use the mouse on a reflective or glass surface.

Mac: Plug the mouse into a USB-A port, it’s ready to use.

USB-C 2.4Ghz wireless setup

  1. Connect the USB-A / USB-C adapter onto the USB-A mouse connector.
  2. Connect the 2.4Ghz receiver into your computer USB-C port
  3. Windows will automatically launch the installation of the drivers (Plug&Play).
  4. Wait for the WINDOWS confirmation signal.
  5. Your mouse is ready to use and properly setup.
    CAUTION: Do not use the mouse on a reflective or glass surface.

Mac: Plug the mouse with adapter into a USB-C port, it’s ready to use.

Tricks
DPI adjustment
The button located between the right and left click is use to adjust the DPI resolution.

  • First use: Grade 1: 1200DPI
  • 1 click: Grade 2: 1600DPI
  • 2 click: Grade 3: 2400DPI
  • 3 click: Grade 4: 3600DPI

Side buttons
The two buttons on the side of the mouse are used to navigate your web browser more easily.

  • Right side button (front most): forward or next page function
  • Left side button (the most at the back): backward or previous page function
    CAUTION: This function is not supported by Safari.

Declaration of Conformity
Urban Factory declares that the EMR01UF-N / EML01UF-N mouse complies with the essential requirements and other relevant provisions of Directive 2014/53 / EU.

Headquarters: Urban Factory, 57 rue de la Convention 75015 Paris FRANCE

Product Name: ERGO NEXT: ERGONOMIC VERTICAL WIRELESS 2.4GHZ MOUSE (RIGHT AND LEFT HANDED)
Reference: EMR20UF-N / EML20UF-N

To which this statement relates is in conformity with the following European and international normative document(s).

  • EMC (Directive 2014/53)
  • EN55032:2015+AC:2016
  • EN6100-3-2:2014 & EN6100-3-3:2013
  • EN55024-2010+ A1-2015
  • EN610004-2:2009 EN61000-4-3:2006+A1:2008+A2:2010
  • EN61000-4-4:2012 EN61000-4-5:2014
  • EN61000-4-6:2014 EN61000-4-8:2010
  • EN61000-4-11:2004
  • Directive RoHS Directive 2011/65 / EU
  • Regulation 1907/2006 (REACH)

Signed in Paris on 15 June 2022 by Thierry Zeitoun, General Manager.

Warning

  1. Do not insert a screwdriver or other blunt objects into the moldings, ports, buttons or aeration of the mouse.
  2. Do not open the mouse.
  3. Do not throw the mouse but send it to a recycling center.
  4. Do not immerse or wet.
  5. Do not throw in the fire.
  6. Do not use the mouse for any purpose other than the one for which it was been designed.
  7. Do not expose to the sun.
  8. Keep away from children

Contact: info@urban-factory.com
Tel: +33 (0)1 45 78 45 78
URBAN-FACTORY.COM

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

URBAN factory User Manuals

Related Manuals