URBAN factory UBFEPR20UF Combo 2.4GHz and Bluetooth Wireless Vertical Ergonomic Mouse User Manual
- June 9, 2024
- URBAN factory
Table of Contents
ERGO PRO
Souris ergonomique Verticale combo
sans fil 2.4Ghz et Bluetooth 5.0
COMBO 2.4GHZ & BLUETOOTH WIRELESS VERTICAL ERGONOMIC MOUSE
Features
*1.1 Product appearance
Bt = Bluetooth**
- Left click
- Scroll wheel
- Right click
- USB-C charging connector
- LED indicator
- CPI Adjustment button
- Backward
- Forward
- On / Off button
- Mode selector (2.4Ghz / Bt*)
- Bt Pairing button
1.3 Into the box
1 Vertical ERGO mouse
1USB-C / USB-A Cable
140CM
1User Guide
Setup
2.4Ghz wireless setup
- Connect the USB-A nano receiver into your computer USB-A port
- Place the the 1/2 button located on the bottom of the mouse on position 1.
- Place the ON/OFF button located on the bottom of the mouse on position ON.
- Press the scroll / left / right buttons just after power ON the mouse , release the scroll / left /right buttons after 3 seconds.
- Your mouse is ready to use and properly setup.
Bluetooth wireless setup
- Place the the 1/2 button located on the bottom of the mouse on position 2.
- Place the ON/OFF button located on the bottom of the mouse on position ON.
- Press the Bluetooth pairing mode button located on the bottom of the mouse during 3s, the light located on the front of the mouse will keep flashing in blue color.
- On your computer, open the Bluetooth devices setup menu then add a new device (+), and select ERGO PRO Left or ERGO PRO right into the field “visible devices” .
- The light on the front will stop flashing.
- Your mouse is ready to use and properly setup.
Tricks
CPI level indication
The LED indicator located on the front of the mouse will flash corresponding to the CPI level.
- flash: Grade 1: 800DPI
- flashes: Grade 2: 1600DPI
- flashes: Grade 3: 2400DPI
- flashes: Grade 4: 4000DPI
Deactivate the side Leds
Pressing the Side buttons (forward and backward) at the same time for 3
seconds to turn ON / OFF the light.
Charging instructions
Charge the mouse
- Connect the USB-A cable port to a charging device and the other end to the USB-C input connector located on the front of the mouse.
- After connecting, the mouse will automatically charged and the LED indicator status will flash in blue.(It will stop flashing when the battery will be charged)
Driver instructions
Driver installation (Win)
- Make sure, the mouse is properly setup on your computer before to install the driver.
- Go to www.urban-factory.com then search for EPR20UF or EPL20UF then download the driver at the bottom page.
Warning
● Driver software is in English
*Macro settings**
-
Click “assign Macro” to enter into Macro settings. Click on “New” then give a name to your Macro then left click onto a blank space to confirm the Macro name. Start record…after finishing click on “stop record” and save the Macro by clicking on “Ok”.
After choosing certain Macro, the background of it will turn green and you will be able to re-edit it. -
What is a Macro? A Macro is a sequence of different click combination recorded in a unique click.
Declaration of Conformity
URBAN FACTORY hereby declares that the EPR20UF mouse complies with the
essential requirements and other relevant provisions of Directive 2014/53 /
EU.
Headquarters: Urban Factory, 57 rue de la Convention 75015 Paris FRANCE
Product Name: ERGO MOUSE PRO WIRELESS RIGHT HAND – 2.4GHZ – BT 5.0 –
RECHARGEABLE – 4000DPI
Reference: EPR20UF
To which this statement relates is in conformity with the following European
and international normative document(s).
- EMC (Directive 2014/30 / EU)
- Health and safety (Directive 2014/53 / EU Art. 3.1 (a))
- Adequate level of electromagnetic compatibility (Directive 2014/53 / EU 3.1 (b)) and efficient use of the spectrum (Directive 2014/53 / EU 3.2)
- EN 55032:2015+A11:2020 – EN 55035:2017+A11:2020
- EN IEC 61000-3-2:2019 – EN 61000-3-3:2013+A1:2019
- ETSI EN 300 328 V2.2.2 (2019-07) – ETSI EN 300 440 V2.2.1 (2018-07)
- ETSI EN 301 489-1 V2.2.3 (2019-11) – ETSI EN 301 489-3 V2.1.2
- ETSI EN 301 489-17 V3.2.4 (2020-09) – EN 62479:2010
- EN IEC 62368-1:2020+A11:2020
Regulation 1907/2006 (REACH)
Warning
- Do not insert a screwdriver or other blunt objects into the moldings, ports, buttons or aeration of the mouse.
- Do not open the mouse.
- Do not throw the mouse but send it to a recycling center.
- Do not immerse or wet.
- Do not throw in the fire.
- Do not use the mouse for any purpose other than the one for which it was been designed.
- Do not expose to the sun.
- Keep away from children
Contact: info@urban-factory.com
Tel: +33 (0)1 45 78 45 78
URBAN-FACTORY.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>