Bamboo CTEK064 10W Wireless Charger with Phone Holder Instruction Manual
- June 10, 2024
- Bamboo
Table of Contents
Bamboo CTEK064 10W Wireless Charger with Phone Holder
Product Information
- Product Name: Bamboo 10W Wireless Charger with Phone Holder
- Item Number: CTEK064
- Dimensions: 110mm x 90mm x 17mm
- Weight: N/A
- Input: 5V 2A, 9V 1.67A
- Wireless Output: 5V 1A, 9V 1.1A
- Working Distance: 6mm
- Working Efficiency: 63%
- Compatibility: Qi enabled devices
Product Usage Instructions
- Connect the cable into a USB port or into a USB AC adapter.
- Put your Qi compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned.
- When the wireless charge is working correctly a white light of the USB connector will light up.
- If your phone has a protective case, you may need to remove it for a successful connection when using the wireless charger.
Warnings
- Do not expose the unit to liquid, moisture or excessive heat.
- Do not disassemble or modify the unit.
- Avoid placing any metal objects between the charger and the mobile device.
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Product Overview
- Charging area
- Indicator Light
- TYPE-C
- Instruction sheet
- TYPE-C Charging Cable
Specifications
- Input: 5V 2A, 9V 1.67A
- Wireless Output: 5V 1A, 9V 1.1A
- Working distance: 6mm
- Working efficiency: ≥63%
Magnetic alignment is suitable for compatible devices only.
Compatible with Qi-enabled devices.
Operation
- Connect the cable into a USB port or into a USB AC adapter.
- Put your Qi-compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned.
- When the wireless charge is working correctly a white light of the USB connector will light up.
_ Note: _If your phone has a protective case you may need to remove it for a successful connection when using the wireless charger.
Warnings
- Do not expose this product to rain or damp conditions.
- Prevent this ítem from falling as it could cause serious damage.
- Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
- In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire.
- Clean it with a dry cloth.
- Do not place this ítem near sources of heat or expose to direct sunlight.
- Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit.
- To avoid risk, do not place any metal objects between the charger and the mobile device during the charging process.
- Do not use mobile devices with a metal case.
- Keep out of reach of children.
- Using your phone while charging it can cause higher temperatures.
- Never store or use this product in temperatures below 32℉ (0 ℃) or above 115 ℉ (45 ℃)
SAFETY WARNING
In order to prevent conditions that can lead to overheating, please make sure that the wireless charging pad surface is free of all metal objects at all times, such as coins or paper clips. In addition, before charging, please remove anything metallic attached to the back of the phone, such as battery cases, ring holders, or plates used for mounting to magnetic phone holders.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the product.
NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.