Bamboo CTEK065 10W Wireless Charging Pad with Cable Organizer User Manual
- June 10, 2024
- Bamboo
Table of Contents
Bamboo CTEK065 10W Wireless Charging Pad with Cable Organizer
Product Information
The Bamboo 10W Wireless Charging Pad with Cable Organizer, Item NO.: CTEK065, is a Qi-enabled wireless charger compatible with compatible devices only. It has a charging area, an indicator light, and comes with a Type-C charging cable. The magnetic alignment feature ensures that your device is correctly positioned for charging.
The wireless charger has an input of 5V 2A, 9V 1.67A and a wireless output of 5V 1A, 9V 1.1A. It has a working distance of 6mm and a working efficiency of 63%. The product comes with an instruction sheet for easy setup and operation.
Product Usage Instructions
- Connect the Type-C charging cable into a USB port or USB AC adapter.
- Place your Qi-compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned.
- When the wireless charger is working correctly, a white light on the USB connector will light up.
- If your phone has a protective case, you may need to remove it for a successful connection when using the wireless charger.
- To avoid risk, do not place any metal objects between the charger and the mobile device.
Warnings
- Do not disassemble or modify the unit.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Made in China
Product Overview
- Charging area
- Indicator Light
- TYPE-C
- Instruction sheet
- TYPE-C Charging Cable
Specifications
- Input: 5V 2A, 9V 1.67A
- Wireless Output: 5V 1A, 9V 1.1A
- Working distance: 6mm
- Working efficiency ≥ 63%
Magnetic alignment suitable for compatible devices only.
Compatible with Qi enabled devices
Operation
- Connect the cable into a USB port or into a USB AC adapter.
- Put your Qi compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned.
- When the wireless charge is working correctly a white light of the USB connector will light up.
Note: If your phone has a protective case you may need to remove it for a successful connection when using the wireless charger.
Warnings
- Do not expose this product to rain or damp conditions.
- Prevent this ítem from falling as it could cause serious damage.
- Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
- In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire.
- Clean it with a dry cloth.
- Do not place this ítem near sources of heat or expose to direct sunlight.
- Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit.
- To avoid risk, do not place any metal objects between the charger and the mobile device during the charging process.
- Do not use mobile devices with a metal case.
- Keep out of reach of children.
- Using your phone while charging it can cause higher temperatures.
- Never store or use this product in temperatures below 32℉ (0 ℃) or above 115 ℉ (45 ℃)
FCC
FCC Statement:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user authority to operate the product. NOTE: This
equipment has been tested and found to comply with the limits for a wireless
power charger, pursuant to Part 18 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>