AOSTIRMOTOR S07-E 750W Electric Mountain Bicycle Instruction Manual

S07-E 750W Electric Mountain Bicycle
Instruction Manual

Display Use & Maintenance

SW-LCD display
OPEN: Mode/M 1.5 seconds long press.
CLOSE: In standby mode, long press Mode/M for 3 seconds
SETTING: After booting, press UP+DOWN for 2.5 seconds(exit in the same way) The detailed settings are as follows:(on the boot state)

Wheel Diameter Setting:
1. UP or DOWN
2. 16-28inch (Default 26inch)
3 . Select, Mode Confirm| Speed Setting:
1. UP or DOWN
2.12-45 KM/H
3. Select, Mode Confirm| Light Setting:
1. UP or DOWN
2 . 1 – 3 (Brightness)
3 . Select, Mode Confirm

MPH/KM Setting:
1. UP or DOWN
2. MPH or KM/H
3 . Select, Mode Confirm| SPEED Setting:
1. UP or DOWN For 3 seconds
2. MAX/AVG/NOW
3 . Select, Mode Confirm| RANGE Setting:
1. PRESS Mode/M
2. Riding mileage/accumulate- total mileage

Front Light Open:
1. Exit Settings
2. UP FOR 3 Seconds
3. Front lamp will work
4. Default: 1| Power Shift Setting:
1. Exit Settings
2. UP/DOWN
3. 1 – 5 (Power)
4. Default: 1| Cruise Mode Setting:
1. Exit Settings
2. PRESS DOWN FOR 3 Seconds
3. Default: 6KM/H
4. Pushing state, nonriding

• Ride your bike in a safe way. Don’t hit or knock the display.
• Keep away from bad environments when used, such as downpours, large snowflakes, and solarization.
• Try not to use it in under-voltage conditions.
• The screen will get dark along with the temperature reduction when the temperature is below -10°C. The screen will return to normal when the temperature rises again.

Controller Use & Maintenance

1. Battery negative connection line

2. Battery-positive connection line

3. Phase line – ERROR 23

4. Tail light wire

5. Integrated the main line

6. Power sensor line

7. Motor Hall plug wire

8. Please be careful not to get water into t h e controller box

9. When the bike does not work:
   1)Check the connection of controller cables;

2. Try to restart or Replace the controller ;
   3)Contact us by email

Motor Maintenance

1. Please check the integrity of the motor blocking piece regularly.
2. Please check the integrity of the cable before and after riding.
3. Please check t h e integrity of m o t o r s h e l l before and after riding.
4. Please do not use the motor in extreme environments, and do not let the motor work in water.
5. When you find the motor power is insufficient, please get out of the bike and not force it.

FAQ

Is there a power usage or battery gauge on the bike?****

– Yes, there is a full-screen LCD display. There is also an additional LED battery gauge on the side of the battery pack. 2x the info!

Is there a switch to prevent accidental starting?****

– Yes, there is an on/off button on the battery pack. The brake levers also come standard with a safety power stop switch built in.

How do? lock it up and what can****

– I do help minimize the chance of it being stolen.
– AOSTIRMOTOR Bike has some great anti-theft features, including a locking battery rack with keys to keep the bike safe, and the rear wheel which is bolted down reduces the chances to be stolen.
– Most standard U-locks and cable locks work fine on our AOSTIRMOTOR E-bike.

Does it work in the rain?****

– The components are all waterproof and work very well in wet conditions, But we do not suggest using our bikes on a rainy day.
– We suggest that you should keep your bike parked indoors and keep him in a dry situation.

POWER BRINGS JOY
www.AOSTIRMOTOR.com
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>