Atlanta ATH-717 Electric Kettle Instruction Manual

Atlanta ATH-717 Electric Kettle Instruction Manual

DEAR CUSTOMER!
CONGRATULATIONS ON YOUR GOOD CHOICE! NOW YOU ARE THE OWNER OF ATLANTATM PRODUCT NOTABLE FOR ITS PROGRESSIVE DESIGN AND GOOD QUALITY PERFORMANCE. WE HOPE OUR PRODUCTS WILL STAY WITH YOU FOR  YEARS ON END.

BEFORE OPERATING

Please read these operating instructions before kettle operating. Before the first use or in case of long time interruption in operation it is recommended to pour water to the maximum level mark and bring it to the boiling. Pour off the boiled water, repeat the procedure twice.

SAFETY MEASURES

• The kettle operates from power supply; power supply technical characteristics are specified on the factory marking of device.
• As surface temperature of the kettle can be over 60 °С, do not touch it except for a handle and buttons.
• Distance between the kettle and other appliances above it must be over 50 cm  in order not to be damaged by steam. Avoid close position to other appliancesthat are easily distorted due to high temperature.
• The device is not intended for use by persons (including children) with reduced physical, sensory or mental ability or if they have no experience or knowledge, if they are not under control or not instructed on the use of the instrument the person responsible for their safety.
• Do not leave the appliance unattended when the kettle is plugged in or when children are around. A power supply cord must not be hung down as children can pull it, throw the kettle and get burnt.
• To avoid the danger, if the power cord has been damaged, it should be replaced by the manufacturer, its agent or similar qualified person.
• The kettle must be used only upright. Never use it on uneven and non  heatresistant surface.
• Use a separate socket for the kettle.
• In case of connecting the device never use the electrical extension cord.
• In order to avoid a fire or electric shock:
  • do not scrape the body of the kettle;
  • do not expose the electric part of the kettle to rain or water exposure;
  • do not submerge the kettle into water or other liquid;
  • KEEP THE APPLIANCE PLUGGED OUT IF IT IS NOT USED, THE DEVICE IS DANGEROUS EVEN IF IT IS UNPLUGGED;
  • do not cover the kettle;
  • do not use the kettle in wet places;
  • do not plug in the kettle if there is water on its base’s surface;
  • do not plug in and plug out by wet hands;
  • do not allow overheating of a plug; it must be fully and tightly put into a socket;
  • do not the kettle if a power supply cord is damaged or soaked;
  • plug out the kettle before cleaning and wait until it has cooled down completely after use;
  • never pull a power supply cord to switch off the appliance, just pull carefully a plug from an outlet;
  • keep the appliance in a dry and cool place.
• The device is designed for indoor use, exclusively for domestic use. Do not use the appliance for professional purposes.
• In case of any work failure, please, apply to the nearest maintenance center with a warrantee certificate. Never fix problems by yourself.
• Don’t arrange kettle near sources, such as: heating radiators, gas stoves, or at places exposed to direct sun rays, excessive dust, mechanical vibration or impact loads.
• In case of transportation under the reduced temperature conditions do not plug in the kettle less than two hours of its storage in warm place. Don’t use any reactive liquids (gasoline, kerosene, alcohol, different solvents) for appliance cleaning.
• Any errors in storage, transportation and use of the device are not covered by the warranty

KETTLE BASIC ELEMENTS

A – top for kettle
B – switch
C – handle
D – base unit
E – kettle housing
F – water-level scale
G – filter (inside the beak)
H – power supply cord
I – operation indicator

PERFORMANCE SPECIFICATIONS

Voltage: 230 V~ 50 Hz
Rated power: 900 W
Capacity: 0,8 L
Operating life: 3 years

The date of manufacture is provided in the serial number of the products: the third and the fourth digits – month of manufacture, the fifth and the sixth digits – year of manufacture (since 2010 to 2019). Example: хх1217хххххх – month 12, year 2017.

OPERATION

1. Arrange kettle with the base unit at flat dry heat-resistant surface as close to the socket as possible.
2. Make sure the kettle is switched off and plug it in: the kettle is switching off by pushing pushbutton on the inner side of the handle.
3. Fill the kettle with water through the top open. Water volume shall be not less than 0.3 l , but not more than the volume marked at the scale as «MAX».
4. Tightly close the top of the kettle otherwise the kettle won’t switch off when boiling.
5. Put the kettle on the base plugged in.
6. Push ON push button (B). Operating indicator is ON (I).
7. Wait till water is boiling. The kettle will switch off automatically. Boiling process may be stopped manually at any time. In order to make repeated boiling, it is necessary to wait a while, till the kettle get cold a little and heat-sensing device arrives to home position.
8. Don’t open the top in the process of boiling and immediately after in order to avoid thermal injury.

NOTES

1. Never fill the kettle with any liquid except water.
2. Be money-saving: don’t boil more water than you need. This will reduce power consumption and increase the operating life of the kettle.
3. Condensate may appear in the kettle in the course of operation.
4. Never heat the kettle on gas or electric stove.
5. The kettle shall be used only with the base completed with the supply.
6. The manufacturer reserves the right to make change in the kettle’s design

CLEANING AND CARE

• The kettle must be cleaned regularly in order to remove calciferous sediments.
  A bulk of sediments on a heating element can cause a breakage of the kettle.

• Plug out the kettle and let it cool down, then clean it with a wet cloth using soda. Do not use reactive and abrasive detergents as they can damage a surface of the kettle.

• Do not use tools when cleaning the kettle.

• To prevent calciferous sediments getting to your cup the kettle is equipped with a filter that must be regularly washed with water. The sediment appeared due to lime water boiling inside of the kettle is not harmful.

• The kettle must be thoroughly washed after cleaning.

• Never put the device into water or another liquid.

ENVIRONMENTAL INSTRUCTIONS

Old appliances are a set of technical materials, so they may not be utilized together with houdehold waste! That is why we kindly ask you to give us an active support in saving the resources and protecting our environment and to hand it over to a receving utilization office (if any).

References

• Атланта - Страховой центр, г. Казань

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>