Atlanta ATH-6810 Professional Hair Dryer Instruction Manual

Professional hair dryer
Instruction Manual

ATH-6810
Ver.2.06.2010

PROFESSIONAL HAIR DRYER

DEAR CUSTOMER!
CONGRATULATIONS ON YOUR GOOD CHOICE! NOW YOU ARE THE OWNER OF ATLANTA™ PRODUCT NOTABLE FOR ITS PROGRESSIVE DESIGN AND GOOD QUALITY  PERFORMANCE. WE HOPE OUR PRODUCTS WILL STAY WITH YOU FOR YEARS ON END.

BEFORE OPERATING

Please, read all these instructions carefully before using the appliance. We recommend you to adheres to the distance from the nozzle to the hair at least 15cm. Compliance with this requirement ensures the temperature effect on the hair at 57 ° C which is perfect temperature for normal type of hairs. If you use a hair dryer for styling you can use your short exposure to a small strand of hair with reduced distances of up to 5 cm. The temperature effect in this case will be at 70 °C

SAFETY MEASURES

• The device is designed to operate from a power source with the specifications indicated on its marking.

• Never cover air inlets and air outlets, otherwise, this will result in device overheating and melting of the housing of the hair dryer.

• Make sure no hair, dust, etc. enters the air inlets.

• Avoid the proximity of any items easily deforming from high temperatures.

• DO NOT USE THE HAIR DRYER IN BATHROOMS OR NEAR OTHER SOURCES OF WATER.

• Do not use hair styling sprays during operation of the device.

• THIS DEVICE MAY NOT BE USED BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY ARE NOT SUPERVISED OR HAVE NOT BEEN INSTRUCTED CONCERNING THE USE OF THE DEVICE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.

• DON’T LEAVE THE DEVICE UNATTENDED IF IT IS SWITCHED ON OR WHEN CHILDREN ARE PRESENT NEAR IT. DON’T LET THE CHILDREN PLAY WITH OR USE THE HAIR DRYER. CHILDREN AT THE AGE OF 8 AND OVER ARE ALLOWED TO USE THE DEVICE IF THEY ARE CONSTANTLY SUPERVISED BY ADULTS.

• If the power cord is damaged, in order to avoid hazard, it shall be replaced by the manufacturer, the agent, or by a similarly qualified person.

• Do not place the switched on hair dryer onto soft, uneven or non-heat-resistant surfaces.

• Do not use any other attachments which are not included in the package contents.

• The device gets hot during operation. Hold it only by its handle and do not change the attachments before it is completely cooled down. Avoid contacts of the heating elements with the power cord.

• When connecting the device, using an extension cord is prohibited.

• Do not twist the cord or wind it onto the device.

• In order to reduce the hazard of fire or electric shock:
  – do not open up the housing of the product;
  – do not expose the electrical part of the device to rain or moisture;
  – do not immerse the device in water or other liquid;
  – IF NOT IN SERVICE, STORE THE HAIR DRYER DISCONNECTED FROM THE MAINS.
  THE DEVICE POSES A HAZARD EVEN IF SWITCHED OFF;
  – do not use the device in humid areas;
  – do not hold the hair dryer with wet hands;
  – do not plug in or out the device with wet hands;
  – avoid overheating of the plug; make sure it tightly sits in the socket and inserted all the way.
  – do not use the hair dryer if the power cord is damaged or moistened;
  – disconnect the device from the mains before cleaning and wait until it fully cools down after operation;
  – never pull the power cord in order to switch off the device; take the plug out of the socket carefully;
  – store the device in a dry and cool place.

• The device is designed for operating indoors, for domestic use only. Commercial use of the device is prohibited.

• If any failure or mechanical damage occurs during operation, do not use the device. In this case, address to the nearest service center and submit the warranty certificate. Never remove the faults by yourselves.

• Do not place the device close to any sources of heat, such as: heating radiators, gas stoves; or in areas subject to direct sunlight, excessive dust, mechanical vibration or impact loads.

• After transportation under low temperature conditions, the device can be connected to the mains only after two hours in a warm room.

• Do not use any chemically active liquids (petrol, kerosene, alcohol, various solvents) for cleaning the housing of the hair dryer.

• Any faults in storage, transportation or operation of the device are not covered by the warranty.

HAIR DRYER PARTS IDENTIFICATION

A – concentrator nozzle
B – body
C – air inlet
D – back cover
E – «COOL» function button
F – on/off /speed control
G – power control
H – handle
I – power cord

TECHNICAL SPECIFICATIONS

If the device is used carefully, the service life can significantly exceed the parameter stated by the manufacturer.
Date of production is represented on the label of the product in the format MM. YYYY

STYLING

1. Completely unwind the electric cord.
2. Connect the selected attachment to the hair dryer body. You may perform the simple drying without attachment as well. Please use towel to dry your hair well and use comb before you turn the hair dryer on.
3. Plug the hair dryer into a suitable power supply after making sure that the speed switch (F) is in the “0” (off) position.
4. Use the switch (F) to set motor speed into position I or II.
5. Set the airflow switch (G) to the appropriate position: 0 – cool mode, I – gentle airflow for soft drying or styling, II – high airflow for ultra fast drying or styling.
6. Start drying hair from the back taking a strand for a strand. Move the airflow from roots to ends of hair.
7. Proceed to styling until the hair is still wet. You should completely finish of one strand before you take next.
8. You can also sue the cool air function by pressing the «COOL» button (E). The essence of this function is the combined use of high temperature and cool shot to get shape fixed well.
9. If you hear any strange noises while using the appliance or the operation of the hair dryer motor is disturbed, it may be the sign of the hairs stuck in the air inlet; for getting them out see “How to clean your hair dryer” below.
10. After use set the speed switch (F) into the “0” position and unplug the appliance.  Before storing the hair dryer let it cool down.

NOTES

• When first in use or after a long rest period, you may notice a characteristic odor of burnt dust accumulated on the heating element.
• This appliance is equipped with an automatic thermal limiter. If the appliance overheats or the air intake vents are blocked or clogged, an automatic device will switch the dryer off.
• After the heating element is cooled down and the temperature is back to normal you can restart the appliance and use it as usual.
• The manufacturer has the right to make alterations in the hair dryer design.

HOW TO CLEAN YOUR HAIR DRYER

• Use a soft dry cloth to wipe the outside surface.
• Unplug the unit and let it cool down, then use a soft damp cloth to wipe the outside surface. Do not clean the hair dryer with chemically active liquids or abrasive washing agents, as they can damage the surface.
• Do not clean the hair dryer with the help of other tools.
• You can easily extract the hairs that got into the motor if needed. For that unplug  the appliance, then open the back lid. Usually hairs get wound round the ventilator  and can be easily extracted with the help of a thin object. After cleaning set the cap back into place; do not operate the appliance with the back protective lid off.
• Do not immerse the appliance in water or other liquids.

ENVIRONMENTAL INSTRUCTIONS

****Old appliances are a set of technical materials, so they may not be utilized together with household waste! That is why we kindly ask you to give us an active support in saving the resources and protecting our environment and to hand it over to a receiving utilization office (if any).

www.my-atlanta.ru

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>