Atlanta ATH-1736 Hot Plate Instruction Manual
- June 10, 2024
- ATLANTA
Table of Contents
ATH-1736 Hot Plate
Product Information: ATH-1736 Hot Plate
The ATH-1736 Hot Plate is a kitchen appliance notable for its progressive
design and good quality performance. It has a heating plate with a diameter of
185mm and a maximum load capacity of 10kg.
The product dimensions are 25.0 x 25.0 x 6.5 cm. The hot plate runs on a rated
power of 1500W and requires a voltage of 230V~ 50 Hz.
The service life of the product is 3 years.
Parts Identification:
- A – Heating plate
- B – Housing
- C – Operation indicator
- D – Switch/temperature control
- E – Power supply cord
Safety Measures:
Before operating the hot plate, please read the instruction manual
carefully. The old appliances should not be utilized with household rubbish
and should be delivered to a utilization reception center.
Contact Details:
For any queries, please contact Atlanta at:
- Website: www.my-atlanta.ru
- Email: vopros@my-atlanta.ru
- Phone: +7 499 504-4855
Product Usage Instructions
- Place the hot plate on a flat and stable surface.
- Plug in the power supply cord into an electrical outlet.
- Turn on the hot plate by pressing the switch/temperature control button.
- Adjust the temperature as per your requirement using the switch/temperature control button.
- Once the hot plate has heated up to the required temperature, place the cookware on the heating plate.
- After use, turn off the hot plate and unplug the power supply cord from the electrical outlet.
HOT PLATE
DEAR CUSTOMER!
CONGRATULATIONS ON YOUR GOOD CHOICE! NOW YOU ARE THE OWNER OF ATLANTATM
PRODUCT NOTABLE FOR ITS PROGRESSIVE DESIGN AND GOOD QUALITY PERFORMANCE. WE
HOPE OUR PRODUCTS WILL STAY WITH YOU FOR YEARS ON END.
BEFORE OPERATING
Please, read this instruction manual carefully before operating the appliance.
SAFETY MEASURES
-
The appliance operates from power supply; power supply technical characteristics are specified on the factory marking of device.
-
Do not place empty frying pans and saucepans on the hot plate, as the cook top heats very quickly and the oil left unattended can ignite. Never extinguish the burning oil with water.
-
Do not move the hot plate when a dish is placed onto it.
-
Do not place knives, lids, and other metallic objects on the hot plate. They may heat up while the appliance is in use.
-
The oil left on the running induction hot plate could be reason of fire. Do not extinguish burning oil by water.
-
Do not heat closed tin cans on the hot plate, as they can explode.
-
Do not operate the appliance close to objects that can be easily deformed by high temperature.
-
Do not operate the hot plate in the bathroom or close to other water sources.
-
The device is not intended for use by persons (including children) with reduced physical, sensory or mental ability or if they have no experience or knowledge, if they are not under control or not instructed on the use of the instrument the person responsible for their safety.
-
Do not leave the appliance unattended when the device is plugged in or when children are around. A power supply cord must not be hung down as children can pull it, throw the appliance and get burnt.
-
To avoid the danger, if the power cord has been damaged, it should be replaced by the manufacturer, its agent or similar qualified person.
-
Do not put the hot plate on a soft, uneven, non-heat resistant surface.
-
Use a separate socket for the air pot.
-
In case of connecting the device never use the electrical extension cord.
-
Do not twist the cord and do not wind it around the appliance.
-
In order to reduce the risk of fire and electric shock:
- do not scrape the body of the appliance;
- do not expose the electric part of the device to rain or water exposure;
- do not submerge the device into water or other liquid;
-
KEEP THE APPLIANCE PLUGGED OUT IF IT IS NOT USED, THE DEVICE IS DANGEROUS EVEN IF IT IS UNPLUGGED;
- do not use this appliance in damp rooms;
- do not operate the hot plate, if your hands are wet;
- do not plug or unplug the appliance with wet hands;
- do not allow the plug to overheat; make sure the appliance is properly plugged;
- do not use the hot plate if the supply cord is damaged or wet;
- plug out the appliance before cleaning and wait until it has cooled down completely after use;
- never pull the power supply cord to unplug the appliance; instead, grasp the plug and pull to disconnect;
store the appliance in a cool dry place.
-
The device is designed for indoor use, exclusively for domestic use. Do not use the appliance for professional purposes.
-
In case of any work failure, please, apply to the nearest maintenance center with a warrantee certificate. Never fix problems by yourself.
-
Don’t arrange the device near sources, such as: heating radiators, gas stoves, or at places exposed to direct sun rays, excessive dust, mechanical vibration or impact loads.
-
In case of transportation under the reduced temperature conditions do not plug in the appliance less than two hours of its storage in warm place. Don’t use any reactive liquids (gasoline, kerosene, alcohol, different solvents) for device cleaning.
-
Any errors in storage, transportation and use of the device are not covered by the warranty.
HOT PLATE PARTS IDENTIFICATION
- A – heating plate
- B – housing
- C – operation indicator
- D – switch/temperature control
- E – power supply cord
TECHNICAL SPECIFICATIONS
- Voltage: 230 V~ 50 Hz
- Rated power: 1500 W
- Heating plate diameter: 185 mm
- Maximum load: 10 kg
- Product dimensions: 25.0 x 25.0 x 6.5 cm
- Service life: 3 years
The date of manufacture is provided in the serial number of the products: the third and the fourth digits – month of manufacture, the fifth and the sixth digits – year of manufacture. Example: хх1219хххххх – month 12, year 2019.
OPERATING THE HOT PLATE
- Place the hot plate onto a steady even surface, 10 cm from the wall. Unwind the cord completely.
- Plug the appliance.
- Put the dish with the products onto the hot plate. Try to place the dish exact onto the heating plate.
- Turn the switch / controller by setting the desired temperature. The operation indicator lights and the heating element will heat up.
- The thermostat will disable the heater upon reaching the set temperature. Heater will be reconnected by thermostat as soon as the temperature drops for 20° C. Thereby it keep the desired temperature automatically.
- When you have finished please turn the switch counter-clockwise until it clicks to turn it off. The operation indicator will go out then. Unplug it If you’re not going to use hot plate in the near future.
NOTES
- At the time of first use and use after a long break it can smell a little burnt technological grease and settled dust.
- We recommend you use dishes with thick base, this will allow you to increase the cooking power without the fear of burning your meal.
- The manufacturer has the right to make alterations in the hot plate.
CLEANING AND HANDLING
- Switch hot plate off, let it to cool down and unplug the hot plate. Then clean housing with a soft damp cloth. Do not clean the hot plate with chemically active liquids or abrasive washing agents, as they can damage the surface.
- No need to wipe and clean the heating element. It is cleared automatically while it works.
- Avoid water and food getting into the air vents.
- Do not clean the hot plate with the help of other tools.
- Never immerse the appliance in water or other liquids.
INSTRUCTIONS FOR ENVIRONMENTAL PROTECTION
The old appliances are the assemblage of technical materials and therefore
cannot be utilized with household rubbish! For this reason, we would kindly
ask you to support us in resource saving and environmental protection and
deliver this appliance into a utilization reception center (if there is one).
Website: www.my-atlanta.ru
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>