RESERVE HDHU.9813RG Motorcycle Headunit CarPlay and Android Auto Owner’s Manual

RESERVE HDHU.9813RG Motorcycle Headunit CarPlay and Android Auto

Owner’s Manual EN
OEM UPGRADE HEAD UNIT FOR 1998-2013 HARLEY DAVIDSON® ROAD GLIDEMOTORCYCLES

TECHNOLOGIES

IPx6
WATERPROOF FACEPLAT E
HDHU.9813RGSafety First Safety Definitions
Pre-Riding Check list Care and cleaning Screen
Appearance Accessories & Installation Installation Headunit Control Wiring Harness
Operation
Main menu Setting Apple CarPlay/Android Auto Radio operation USB operation Bluetooth Music Bluetooth Phone SiriusXM Ready Camera in Specification
Trouble Shooting FCC Notes

Safety First

Safety Definitions

2

Statements in this manual preceded by following words are of special significance:

3

WARNING

3

WARNING indicates a potentially hazardous

3

situation which, if not avoided, could result

in death or serious injury.

3

4

WARNING

5

Set volume levels and other controls on

6

audio and electronic devices before riding.

8

Distractions can lead to loss of control,

resulting in death or serious injury.

10 WARNING

Do not select a volume level that blocks out

11

traffic noise or interrupts the concentration

11

necessary for the safe operation of the Motor-

16

cycle. Distractions or a volume level that

18

blocks our traffic noise could cause loss of

18

control resulting in death or severe injury.

19

20

21

Note

27

Pay attention while riding, keeping your eyes and

28

clear mind on the road. Some features are locked out

to prevent distraction, limited in capability while the

29

Motorcycle isin motion. Even a part is available, donot

30

allow it to distract you from operating your

Motorcycle safely.

For safety, program the system when stopped. Perform system setup and get familiar with the controls and features of the infotainmentsystem before operating the Motorcycle on the road. This system cannot warn about the safety of an area, bad road conditions, and availability of emergency services.

Use this radio only in locations where it is safe to do.

2

Pre-RIDING
Check list
Configure the system with your personal preferences before riding to use features and minimize distractions while on the road entirely. 1. Set brightness, background. 2. Configure presets. 3. Adjust audio settings like EQ, volume, fade, balance etc. before ridding. 4. Pair, connect and set up phone features through Bluetooth. 5. Connect USB devices for Apple CarPlay® or Android Auto®. 6. Selectstation or media

CARE AND CLEANING

Use only HDHU.9813G recommended products and methods to keep the radio, speakers, and other audio system components clean and in good condition. Do not use any abrasives, polishes, or rubbing compoundsto clean the screen or other components. Do not use any ammonia-based cleaners on the net. The use of other products or methods may cause damage to components.
Screen :
Do not use any chemical cleaners or chemical-containing wipes or cloths. These can cause damage to the screen surface.
Gently clean the display glasssurface with a clean, dry microfiber cloth. Before cleaning, it is suggested to remove any visible dust, dirt, sand particles with a gentle compressed airstream.

Appearance
Front
Top

Back
3

Accessories and Installation

Harness Included!

23 Pin to Motorcycle

Connector to Headunit

35 Pin to Motorcycle 35 Pin to Motorcycle

Installation Rubber Ring:

User Manual
Owner’s Manual EN OEM UPGRADE HEAD UNIT FOR 1998-2013 HARLEY DAVIDSON® ROAD GLIDEMOTORCYCLES

Installation Screws (4pcs):

IPx6 WATERPROOF FACEPLAT E

TECHNOLOGIES

HDHU.9813RG

External Microphone:

4

Installation Installation
1. Insert the Headunit into the dashboard.

Headunit 2. Use the 4pcs screws to fix the headunit.

Motorcycle Dashboard

Screws 3. Connect the correct wiring and enjoying the headunit.

5

Headunit Control
Panel Control.

1 2

3 1

Apple CarPlay® / Android Auto®

2

Press to enter CarPlay® / Android Auto® directly(When the iPhone/Android phone

is connected).

Siri ButtoncVoice Recognition
When the iPhone/Android phone is 3 connected, press Siri button to start the
voice control function.

Power / Mute
· When the power is off, press to power on. · When the unit is working, short pressing for Mute, press again for unmute. · Pressing and hold to turn the source unit power off.

4 5 6

4

(Volume +)

· Press to increase the volume value.

5

Home button

· Press to toggle between Home screen and

active media.

· Available selections: Radio, SiriusXM, Apple CarPlay®/Android Auto®, BT Music, BT Phone, USB,Settings, Camera in.

6

(Volume -)

· Press to decrease the volume value.

6

Headunit Control
Handble Bar Control.
· Press to increase the volume value. Mute Button · When the unit is working, short pressing for Mute, press again for unmute. Siri ButtoncVoice Recognition · When the iPhone/Android phone is connected, Long press this button to start the voice control function. · Press to decrease the volume value.
·[Radio] Press to select Next preset radio station for broadcasting. Press and hold to seek upward . ·[USB Music] Press repeatedly to shift track next for playback. Press and hold to active variousfast forward speeds for playback. [Bluetooth Music] Press repeatedly to shift track next for playback. Mode Button · When the unit is working, press to select desired playback mode. Bluetooth Button #MVFUPPUI$POOFDUFE
· When incoming call, short press to answer the call, long press to reject the call. · When talking call, long press to hangup.
·[Radio] Press to select previous preset radio station for broadcasting. Press and hold to seek downward . ·[USB Music] Press repeatedly to shift track previous for playback. Press and hold to active various fast rewind speeds for playback. [Bluetooth Music] Press repeatedly to shift track previous for playback.
7

Wiring
1

34 2

6 5

1 USB Connector Connect the external USB cable for USB device, Android smart phone, iPhone.
2 Radio Connector Connect the Radio Antenna from motorcycle.
3 Camera in Connect the Camera in.
4 External Microphone Connector Connect the external Microphone cable.
5 Camera +12 V DC (Max 0.5A) Connect the Camera power cable.
6 SiriusXM Tuner Connector Connect the SXV300 tuner.
Note: SiriusXM SXV300 Tuner sold separately, SiriusXM subscription required.
USB Connector (USB Storage /Apple CarPlay/Android Auto)
Radio Antenna

HDHU.9813RGWire Harness

SXM Tuner(Not included)
3.5mm Connection for Included Bluetooth Calling Microphone
Camera in Camera Control Wire (+12V Max0.5A)
RCA Low-Level Subwoofer Channel Output For Optional Subwoofer Amplifier (RCA not incl.) RCA Low-Level Rear Channel Output for Optional Speaker Amplifier (RCA not incl.) RCA Low-Level Front Channel Output for Optional Speaker Amplifier (RCA not incl.) 8

Wiring

1
2 3
4 ABCD E F G H

32 Pin Connector Pin Definition:

A3,Blue( SWC R2) A4, Blue( SWC C1)
E1,Green( RL+)
E3,Blue( REM) E4, Blue( SWC R0)

B4, lue( SWC C0)

C4, Blue( SWC C2)

F1,Purple/Black( RR-) F2,Purple( RR+)
F4,Blue( SWC R1)

G1, White/Black( FL-) G2, White( FL+) G3, Black(Ground) G4, Black(Ground)

D1,Green/Black( RL-) D2,Red( ACC)
D4, Blue( SWC C4)
H1, Gray/Black( FR-) H2, Gray( FR+) H3, Yellow( B+) H4, Yellow( B+)

9

Included Harness Harness Included!
23 Pin to Motorcycle
35 Pin to Motorcycle 35 Pin to Motorcycle

Connector to Headunit

16 9 1
23 15 8
23 Pin Connector

P1, Gray/Black( FR-) P3, Blue( SWC R0) P4, Blue( SWC R1) P5, Blue( SWC R2) P6, Blue( SWC C4) P8, Blue( SWC C2) P10, Yellow( B+) P11, Black( Ground) P12, Red( ACC) P16,White( FL+) P17, White/Black( FL-) P18, Gray( FR+) P19, Black( Ground) P20, Yellow( B+) P22, Blue( SWC C1) P23, Blue( SWC C0)

24 13 1

P1,20#, Purple( RR+) P2,20#, Green( RL+)
P24,20#, Purple/Black( RR-) P25,20#, Green/Black( RL-)

23

35

12

35 Pin Connector

10

Main Menu
HDHU.9813RG is a headunit for Motorcycle with the following functions: Apple CarPlay®, Android Auto®, Radio, USB, BT Music, Phone, Camera, SiriusXM ready . Touch the corresponding Mode icon to enter playing mode. The Mode icon in gray means the corresponding function is not ready, or the proper device has not been connected.

Settings
Touch the icon to enter the Setup menu. The Setup menu is included System Settings, Display Settings, Audio & EQ Settings, Bluetooth Settings

Hidden soft button bar: A hidden pop up soft button bar is located at the bottom. Touch the icon to shown the soft button bar. Touch the to hidden.
Dimming, to change Daylight or Night
Setup, to enter the Settings Menu.
Bluetooth pairing.
Camera in.
EQ, to enter the Equalizer setting menu.

System Settings The System Settings allow the user to set up the Language, Date & Time, Key Beep, Factory Reset and About
System Settings

Language Date & Time Key Beep Camera View Factory Reset About
Language
Language

Normal

Date & Time: To setting Time display format (12H or 24H), setting the date and time
Date & Time

11

Settings

Key Beep: On / Off To set the touch button beep tone is On or Off.

Touch Key Color
Touch Key Color

Camera View : Normal / Reverse. To set the camera view is Normal or Reverse.

Auto Changing Color

ON

Selectable Color

Factory Setting: To default the default factory settings:

Factory Reset

About: To display the HDHU.9813RG hardware and firmware version.
About

Auto Changing Color: On/Off .

ON: The Led color will change automatically.

OFF: You press the button

or

to select desired color.

Color: White / Red / Orange / Yellow /Blue / Green /

Purple / Cyan.

Background Wallpaper: User can select the preset wallpaper or select prefer picture in USB driver as the wallpaper.
Background Wallpaper
Press + to download a custom, JPG background wallpaper image from a USB flash drive, or select from the options below…

Display setting:
Below is the Display setting menu, user can select Nighttime Brightness,Touch Key Color,Background Wallpaper.

Display Settings

Nighttime Brightness

-8

Touch Key Color

Background Wallpaper

Touch the corresponding picture to select the prefer background. Touch ” + “, the head unit will search the USB photo file for wallpaper. Select a picture and touch “OK” to add the wallpaper.
Select another picture for replacing the current wallpaper.

Nighttime Brightness : -15 ­ 0. (Default is -8).

12

Settings

Audio & EQ Setting Below shown is the Audio serring Menu.
Balance/Fader: Touch the + or ­ of Balance/Fade to tune for the driver and passenger preference. The value of Balance (Left 12 ­ Right 12) and Fader (Front 12 ­ Rear 12). Touch Reset to set both Balance and Fader to zero.
Audio & EQ Settings
13-Band Equalizer: 13-band of EQ tuning, slide the EQ bar to tune each band frequency level according to use preference. Touch Reset button to sell all Band to zero.

About the Crossover
This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs. The crossover adjusts the HPF (high pass filter) or LPF (low pass filter) of speakers and subwoofer, and also the slope (how fast the filter rolls off the highs or lows). Adjustments should be made according to the reproduction characteristics of the speakers. Depending on the speakers, a passive network may not be necessary. If you are unsure about this point, please consult your authorized Alpine dealer.
· HPF (high pass filter): Cuts the lower frequencies and allows the higher frequencies to pass. · LPF (low pass filter): Cuts the higher frequencies and allows the lower frequencies to pass. · Slope: The level change (in dB) for a frequency change . · The higher the slope value, the steeper the slope becomes. · Do not use a tweeter without the HPF set on, with a high cut-off frequency, otherwise damage may occur to the speaker due to the low frequency content. · Adjustment should be made according to the recommended crossover frequency of the connected speakers. Determine the recommended crossover frequency of the speakers. Adjusting to a frequency range outside that recommended may cause damage to the speakers. For the recommended crossover frequencies of speakers, refer to the respective Owner’s Manual. We are not responsible for damage or malfunction of speakers caused by using the crossover outside the recommended value.

Or user can touch “<” or “>” at the bottom to select the following preset EQ: Off, Soft Rock,Pop,Electric,Jazz, EQ Custom.
13

Settings
Front/ Rear Crossover:

Subwoofer Phase: 00 or 1800 User can touch “<” or “>” to select the 00 or 1800 AMP Turn-on Delay: ON /OFF. User can set AMP Turn-on Delay is ON or OFF.
Volume Settings: User can set Source Level / Maximum Volume.

Slope 12dB / 24dB User can touch “<” or “>” to select the desired frequency Value. Subwoofer Settings:
Subwoofer Output: ON or OFF. Subwoofer Level: -10~+10 Subwoofer Crossovers:

Source Level Adjust.

0

0

0

0

0

SiriusXM

0

User can adjust the source mode (Radio, USB, BT Audio,Apple CarPlay, Andriod Auto, SiriusXM) gain value. The gain can be adjusted from -10~0 seperatedly.
Maximum Volume Adjust.

Set Low Pass Crossover Frequency & Slope.
Slope 12dB / 24dB Set High Pass Crossover Frequency & Slope. User can touch “<” or “>” to select the desired frequency Value.
14

Maximum Volume Level : ON or OFF. Maximum Level Adjust: -40~+50

Settings
Bluetooth Settings Touch the Bluetooth Settings from the setting menu will be shown below:
Bluetooth Settings
Connection : On/Off (Select Bluetooth connection is On or Off).
Pairing: To start the paring.
Bluetooth Settings
Device Name : Shown the connected phone or device name.
Clear Records: To clear the device list records.
15

Apple CarPlay®
Apple CarPlay :
You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product.
Compatible iPhone models For details about compatibility of iPhone models, refer to the following website. https://www.apple.com/ios/carplay
WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
Notes on using Apple CarPlay · iPhone with iOS 7.1 or later is required. Update to the latest iOS version before use. · Apple CarPlay can be used on iPhone 5 or later. · For details on compatible models, refer to the compatibility list on the support site on the back cover. · For details about Apple CarPlay, refer to the manual supplied with your iPhone, or visit the website of Apple CarPlay. · Since the GPS on your iPhone is used, place your iPhone where it can easily receive a GPS signal
· You can use Siri function by touching button once Apple CarPlay is activated
· The Bluetooth connection with the Apple CarPlay compatible device will be terminated automatically if Apple CarPlay is turned on. · Hands-free phoning via Bluetooth wireless technology is not available while Apple CarPlay is on.

Starting procedure of using Apple CarPlay 1 Connect an Apple CarPlay compatible device to this unit via USB. 2 Touch the Apple CarPlay icon. The Apple CarPlay home screen appears.
You can use Apps of connected iPhone. The items displayed and the language used on the screen differ among the connected devices. To enter the Apple CarPlay mode, touch Apple Carplay icon on the Home selection screen.
1
2
3
1 Application keys Start the application.
2 Display the home screen of Apple CarPlay. Touch and hold to active Siri.
3 Home Exit the Apple CarPlay screen and displays Home screen.

• The icon design may change depending on the iOS version.

16

Android Auto®
Android Auto®:
You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product
Starting procedure of using Android Auto 1 Connect an Android AutoTM compatible device to this unit via USB. 2 Touch the Android Auto icon. The Android Auto home screen appears
Note: · You can use Voice function by touching
button once Android Auto is activated.
· The Bluetooth connection with the Android Auto compatible device will be terminated automatically if Android Auto is turned on. · Hands-free phoning via Bluetooth wireless technology is not available while Android Auto is on.
Notes on using Android Auto
· Android phone with Android 5.0 or higher is required. Update to the latest OS version before use. · Your Android phone needs to support Android Auto. For details on compatible models, refer to the compatibility list on the support site on the back cover. · Download the Android Auto app on Google Play. · For details about Android Auto, refer to the manual supplied with your Android phone, or visit · Since the GPS on your Android phone is used, place your Android phone where it can easily receive a GPS signal. · Android Auto may not be available in your country or region.the website of Android Auto.

1
2
3
1 Application keys Start the application.
2 Home Exit the Android Auto screen and displays Home screen.
3 Operation Bar Starts the application or displays information.

17

Radio
Touch “Radio” in the main menu to enter the radio interface.

USB
for more than 3 seconds, then the preset button will be highlighted on the screen, and the preset station will be stored.
Radio setting:

Touch “FM” can change between FM1>FM2>FM3.
Touch “AM” can change between AM1>AM2. Touch “GOTO” then Pop-up the GOTO menu and enter the desired Frequency Number.

Radio Area: Select the region , America/Europe
/Eastern Europe /Japan /Southeast Asia /Latin America/ Asia / Australia.
RDS: Switch ON or OFF. TA: Switch ON or OFF. AF:Switch ON or OFF. PTY: Enter PTY list. Note: AF is only for Europe region.

Touch for Prescan search, each scanned station will be played for 10 sec, touch again to stop. Touch to auto scan searching.
Touch to enter EQ settings.
Touch to switch Local or DX.
Touch to enter Radio settings.
Short touch to seek down, long touch to tune down.
Short touch to seek up, long touch to tune up.

USB
Plug the USB; the USB icon will be colorful. Touch the USB icon to enter the USB playback mode. The source unit will playback the audio in the USB device.

Preset channel, six preset buttons store and recall stations for each band. Touch and slide the preset channel can switch to next band FM1/FM2/FM3 or AM1/AM2.
Store a Station
1. Tune radio to desired station. 2.Touch and hold the one of the preset station

Press to go to the following folder. Press to search Audio/Image files. Press to go to the previous folder

18

USB

Short press ti skip previous track. .Long press to fast reverse.
Play or Pause button. Short press ti skip nexts track. Long press to fast forward. Press to select Repeat All> Repeat 1> Repeat Folder. Press to switch Randon is On or Off. Press to select Audio setting or set the preferred EQ of each band in custom mode.
File List Browsing
Touch to browse the folder and file list of the USB device.

Bluetooth Music
Press to search Audio files.
Short press ti skip previous track.
Play or Pause button.
Short press ti skip nexts track.
Press to select Repeat All> Repeat 1> Repeat Folder. Press to switch Randon is On or Off. Press to select Audio setting or set the prefer EQ of each band in custom mode.
Bluetooth Connect:
If the Bluetooth is not connected, press Reconnect the paired Phone or paring to pair the new device.

Select Audio or Music files.
Select Picture files.
Return to playing previous file.
Bluetooth Music:
Touch the BT Music icon to enter Bluetooth Music playing mode. If the Bluetooth is connected, the music will be playing as below shown:

Bluetooth Pairing

Pairing screen will be shown as below:

Turn on the Bluetooth of the Mobile phone/ Bluetooth device; you can see the “SOUNDSTREAM HD.” Select the “SOUNDSTREAM HD” for paring and connection.
19

Bluetooth Phone
Bluetooth Phone:
After the mobile Phone is connected with the source unit via Bluetooth(HFP), the user can go through the source unit Make a phone call. Touch the Phone icon in Main Menu to go to BT Phone mode. Please note it needs to connect the microphone for phone calls.
SOUNDSTREAM HD

SOUNDSTREAM HD

Receive an incoming call:
If the Phone is connected with the source unit via Bluetooth, when an incoming call, below screen will be shown:

Press to answer the incoming call.

Press
Keypad. Tap it to enter call mode.
History. Tap it to show the call record, missed, received and dialed calls. Contact. Tap it to show the phonebook of connected device. BT Setup. Tap it to set Auto answer and Microphone gain. Make a call or Accept the incoming call.
Backspace, tap it to clear the incorrect dial digit.
Make a Call:

to reject the incoming call.
SOUNDSTREAM HD
SOUNDSTREAM HD

1. Touch the icon to enter dial screen.

2. Using the keypad , touch 0-9,*,# , enter the desired number to dial. If you input an incorrect number, touch the icon on the keypad to delete the incorrect number.

3. Once hte correct bumber appears on the screen, touch the icon to go to daling interface.

4 To end the call, touch the icon on the screen.

20

Interchange between phone and source unit. ON / OFF the Microphone function. Display the Keypad.

Bluetooth Phone

Call List:

Touch the

icon to display the

call combined list.

SOUNDSTREAM HD

Slide the bar at the right up and down to display a call logs.

Contacts:

Touch the icon

to access the phone

book of the connected mobile Phone.

To make a call from the phonebook,simply

touch the contact’s name

SOUNDSTREAM HD

BT Setup:

Auto Answer On/Off, incoming call auto
answer.
MIC Gain: Low /Middle /High
21

SiriusXM Operation
SiriusXM Ready SiriusXM is where moments happen. The widest, deepest variety of music, ad-free. More games, more sports, more coverage than anywhere. The most extensive entertainment, complete news coverage and every kind of comedy. Listen in your car, on your phone, online and at home. A SiriusXM Vehicle Tuner and subscription are required. For more information, visit www.siriusxm.com. Activating your SiriusXM Subscription after installing your SiriusXM Connect Vehicle Tuner and antenna, power on your Headunit and select SiriusXM mode. You should be able to hear the SiriusXM preview channel on Channel 1. If you cannot hear the preview channel, please check the installation instructions to make sure your SiriusXM Connect tuner is properly installed.
After you can hear the preview channel, tune to Channel 0 to find the Radio ID of your tuner. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging. You will need this number to activate your subscription. Write the number down for reference.
Note: the SiriusXM Radio ID does not include the
letters I, O, S or F. In the USA, you can activate online or by calling SiriusXM Listener care: · Visit www.siriusxm.com/activatenow · Call SiriusXM Listener Care at 1-866-635-2349 For Canadian Subscriptions, please contact: · Visit www.siriusxm.ca/activate · Call SiriusXM Customer Care at 1-888-539-7474
As part of the activation process, the SiriusXM satellites will send an activation message to your tuner. When your radio detects that the tuner has received the activation message, your radio will display “Subscription Updated”.
Once subscribed, you can tune to channels in your subscription plan. Note, the activation process usually takes 10 to 15 minutes, but may take up to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message.

SiriusXM Ready
To enter SiriusXM mode, touch the SXM icon on the Main Menu:
If the CHECK TUNER message appears, verify all connections are complete. Confirm the Vehicle Connect Tuner is connected, as well as the antenna for the Vehicle Connect Tuner.
SiriusXM

User Interface Operation

Press FM or AM keys to toggle between SXM & FM/AM radio mode
Press the SXM key to toggle between three preset groups
Press the ALRT key to view current song and/or artist alerts Press the Channel Browse key to scroll channel listings by category Press the Direct Tune key to enter a specific channel number to tune
Press the EQ key to open the 10-band equalizer settings Press the Settings icon to access settings specific for SiriusXM mode

Press the Next or previous channel keys to advance channels

When successfully connected, the user interface will appear:
SiriusXM
SiriusXM Channel Logos are displayed in the user interface, providing a graphical representation of the current channel tuned.Album art can be displayed for most of the SiriusXM music channels. When album art is not available, the channel logo or the SiriusXM logo will be displayed. Note: Compatible with SXV200 or later tuner models. Not all music channels contain album art images.
22

Press any preset key to tune the stored channel. To store a preset, tune to the desired channel, then press & hold on the preset location for 3 seconds.
Artist & Song Alerts
While listening to SiriusXM Satellite Radio, you can mark Artists and/or Songs for which you wish to be alerted. The radio will display an Alert message whena matching artist or song is found on another channel. Then you can choose if you want to tune to that favorite or you can ignore the alert and stay on your current channel. To save an artist or song title, press on the artist name or song title on the screen. Then, confirm again to save the favorite.
SiriusXM

SiriusXM Operation
SiriusXM
1 [Artist Alert] 10,000 Maniacs Ch 22: Ch0022Sid362Cat01
2 [Artist Alert] Pearl Jam Ch 21: Ch0021Sid363Cat01
Channel Browse
Press the Browse key to scroll channel listings by category or all available channels.
Channel List Press Ch. List to view all available channels in
numeric sequence. Scroll the list to the desired channel, then select within the channel row to tune the channel.
SiriusXM

At any time, press the content key on the right side to view the artist, title, & other
information about the song/content currently playing on the channel(s) listed.

My Music

Press the MyMusic key to view all stored artist &

song title alerts. Press the red X

at right of any

undesired alerts to delete it. Temporarily disable

any alert by deselecting the check box

left of

any alert.

Disable all alerts by sliding the switch on top to off.

SiriusXM
My Music Alerts

My Music
Category List Press Cat. List to view all available channels in
category sequence.
SiriusXM

Direct Tuning a Channel

Press the Direct Tune key to enter a channelnumber

to tune. Enter the channel number using the

keypad pop-up, then select the green check

box

to confirm your selection. If a number is

entered in error, press the red backspace keyto

erase the last digit.

SiriusXM

My Music
Select a category by pressing the left or right arrows above the channel list. Scroll the corresponding category’s channels below, press a channel name to tune the channel.
23

SiriusXM Operation
13-Band Equalizer
Press the 13-Band Equalizer key to access the audio equalizer settings. Return to the Audio & EQ Settings section of this owners manual (pg. 13) for more information.

SiriusXM

Then, the channel list will appear to scroll the subscribed channels. Select any channel(s) to lcok. When a channel is successfully locked, a lock icon will appear adjacent to the channel name.
SSiirriiuussXXMM

SiriusXM Settings Menu
Press the settings icon to enter the SiriusXM settings menu.
SiriusXM

Parental Controls

The Parental Lock feature can be used to block

user selected channels from playback. To

enable the parental lock, slide the virtual switch

to ON. The switch should illuminate orange. A

passcode pop-up will appear, requesting the

parental lock passcode. Enter the 4-digit

passcode, then select the green check

box

to confirm. If a number is entered by

mistake, press the red backspace

key

to erase the last digit. The default passcode is

Change Passcode

Select Change Passcode to change the

passcode required to activate the parental lock

feature and to lock & unlock channels. A

passcode pop-up will appear, requesting the

current passcode. Enter the 4-digit passcode,

then select the green check box

to

confirm. If a number is entered by mistake,

press the red backspace key to erase the

last digit. The default passcode is 0000.

SiriusXM

24

SiriusXM Operation

Then, another passcode pop-up will appear,

requesting the new passcode. Enter the 4-digit

passcode, then select the green check

box to confirm. If a number is entered by

mistake, press the red backspace key

to

erase the last digit.

SiriusXM

Then, the channel list will appear to scroll the subscribed channels. Select any channel(s) to lock or unlock. If a channel is successfully locked, a lock icon will appear adjacent to the channel name.
SiriusXM

Then, a third & final passcode pop-up will

appear, requesting to enter the new passcode

again to the green check box

to confirm.

If a number is entered by mistake, press the red

backspace key to erase the last digit.

SiriusXM

Lock Channel

Select Lock Channel to lock or unlock channels

from playback. A passcode pop-up will appear,

requesting the current passcode. Enter the

4-digit passcode, then select the green check

box

to confirm. If a number is entered by

mistake, press the red backspace key

to

erase the last digit. The default passcode is 0000.

SiriusXM

25

SiriusXM trouble shooting

Advisory Message Check Antenna

Cause
The radio has detected a fault with theSiriusXM antenna. The antenna cable maybe either disconnected or damaged.

Explanation / Solution
-Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner. -Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. -SiriusXM products are available at your local car audio retailer or online at: shop.siriusxm.com/all-parts/

Check Tuner No Signal

The radio has difficulty communicatingwith the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or damaged.

Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio

The SiriusXM Connect Vehicle Tuner hasdifficulty receiving the SiriusXM satellite signal.

-Verify that your vehicle is outdoors with a clear view of the sky. -Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle. -Move the SiriusXM antenna away from any obstructions.Inspect the antenna cable for damage and kinks. -Consult the SiriusXM Connect Vehicle tuner installation manual for more information on antenna installation. Replace the antenna if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at shop.siriusxm.com/all-parts/
-Press OK to clear the message.

The radio has detected a change in your SiriusXM Subscription Updated subscription status.

Channel Unavailable

The channel that you have requested is nota valid SiriusXM channel or the channelthat you were listening to is no longeravailable. You may also see this messagebriefly when first connecting a newSiriusXM Connect Vehicle tuner.

The channel that you have requested is not included in your SiriusXM subscription package Channel Unsubscribed or the channel that you were listening to is no longer included in your SiriusXM subscription package.

-In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription.
-In Canada, visit www.siriusxm.ca/activate or call CustomerCare at 1-888-539-7474 if you have questions about yoursubscription. shop.siriusxm.com/all-parts/
Visit www.siriusxm.com for more information about the SiriusXM channel lineup.
-In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription. -In Canada, visit www.siriusxm.ca/activate or call CustomerCare at 1-888-539-7474 if you have questions about yoursubscription. shop.siriusxm.com/all-parts/

Channel Locked

The channel that you have requested is Locked by the radios Parental Control feature.

See the Parental Control section for more information on the Parental Control feature and how to access locked channels.

26

Camera in Camera View
For connecting a camera.
Displaying the picture from the Camera
The camera view screen is displayed when you enter the Camra in.
Camera in
27

Specification

GENERAL Power Requirement: Power Requirement: Current Drain: Maximum Power Output: RMS Power Output: Speaker Impedance: Frequency Response: Operating temperature: Dimensions:
TFT Display TFT Screen size: Resolution
FM RADIO SECTION Frequency Range
Usabe Sensitivity (S/N=30dB) S/N Ratio: Stereo Seperation
AM RADIO SECTION Frequency Range
Usabe Sensitivity (S/N=20dB) S/N Ratio:
Line-out / Subwoofer Output Maximum Output Leve (10K ohms load): Subwoofer Time Align

DC 10 – 16Volts, Negative ground 15A (Max.) 50Watts x 4 25Watts x 4 2- or 4-Ohm Load 20Hz ~20KHz -20~60 ¥ 230mm(W) x 210mm(D)x 140mm(H)
7 ­ Inch TFT/LCD 1024×600 pixels
87.5 ­ 107.9 MHz (America) 87.5 ­ 108 MHz (Europe) 15dB 55dB 30dB
(America) 530 ­ 1710 KHz (Europe) 522 ­ 1620 KHz 40dB 45dB
4 V RMS 0~18ms

28

Trouble Shooting

Problem

Cause

Correct action

Check fuse

Replace fuse

No Power, Dead.
No sound output when operating the unit with amplifiers or power antenna attached.

Incorrect wiring
Power antenna lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna

Consult your Local Specialist. www.MotorcycleAudio.com/Spe cialist- Locator
1. Turn off the unit. 2. Remove all wires attached to the power antenna lead. Check eachwire for a possible short to the ground using an ohm meter. 3. Turn on the unit. 4. Reconnect each amplifier remotewire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external replay to provide remote-on voltage (excessive current required)

Poor performance of radiostation
No Sound or Audio

Weak signal

Move the Motorcycle to another place, then tryagain

Volume is in minimum.
The wiring is not properly connected

Adjust volume to the desired level.
Check wiring connection.

29

FCC Notes
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help
www.MotorcycleAudio.com
Follow Us on Social Media
30

References

• All Parts - Shop SiriusXM
• Motorcycle Audio by PrecisionPower®
• Premium Coaxial Motorcycle Neodymium Speakers
• SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand
• Activate Now | SiriusXM
• iOS - CarPlay - Apple

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>