PAISHENKEJI M-300 Mini Portable Travel Shaver User Manual
- June 10, 2024
- PAISHENKEJI
Table of Contents
M-300 Mini Portable Travel Shaver
User Manual
M-300 Mini Portable Travel Shaver
Notes
Before using the product, please read carefully the operating instructions and
keep properly for future reference.
- Only the included charger can be used.
- Charge voltage 5V (USB).
- The charger includes a transformer which should not be cut off and replaced with another plug; otherwise, it will lead to serious results.
- If the charger is damaged, it should be replaced with a new one with the original type to avoid the danger.
- The temperature for the product’s charge and storage should be between 5 ℃ and 35 ℃.
- Make sure the charge will not become damp (Fig 1).
- Do unplug the charger before cleaning the shaver with running water (Fig 2).
- Knife head can be washed without washing the body.
- This product cannot be used by physically distempered, sensorially or mentally disordered, or inexperienced persons (including children), unless they are under supervision or instruction by people in charge of their security.
- Take care of children to keep them away from this product.
- When the shaver is charging, the indicator lamp will be off. Press the switch button back to the off state for charge.
- It’s necessary to ensure to put the protective cover on the shaver when you travel to protect the shaver head.
- Please clean inside beard if the shaver can not work after you press the switch.
Charge
Make sure the product is power-off before the charge.
The charge lasts about 2 hours.
It’s better for the product not to be connected to the power supply for more
than 24 hours.
-
Insert the product charger into the shaver (Fig 3).
-
Plug in the charger .
-
The charge indicator lights up (Fig 4).
-
After the full charge,unplug the charger and also pull off the product’s plug from the shaver.
How to Use Product
Shaving
-
Press the button ON/OFF to start the shaver.
-
Make the shaver head part move quickly on the skin in straight lines and circles (Fig 5).
-
The shaver can run for ten days after a full charge.
Cleaning & Maintenance
To ensure a better shaving effect, the shaver must be cleaned regularly.
The easiest and most sanitary way to clean the product is to wash the shaver
head part and the whisker storeroom with water each time after using it.
Do be careful while using hot water. Do remember to check the water is not too
hot to avoid harming hands.
Every day: the shaver head part and the hair storeroom.
-
Cut off the power supply of the shaver, then unplug the charger and also pull out the product’s plug from the shaver
-
Open the shaver head part(Fig 6).
-
Clean the shaver head part and the hair storeroom with hot running water(Fig 7).
Make sure both of the shaver head part and the hair storeroom be
cleaned thoroughly. -
Wash the product’s surface (Fig 8 ).
-
Close the shaver head part and throw off surplus water. Do not wipe the shaver head part with a towel or paper tissues, which may cause damages to the shaver head.
-
Open the shaver head part again and remain so to dry up the product (Fig 9 ).
You can also use the brush included to clean the hair storeroom.
Here water should not be used.
Change
Change the shaver head once a year to get the best shaving effect. The shaver
has a long service life if not damaged for human factors.
The damaged or abraded shaver head can only be replaced with products SPEED-XL
shaver head
-
Pull out the old shaver head assembly out of the shaver (Fig10).
-
Insert the flange of the new shaver head assembly into the groove (1) on the shavers top and then press down the shaver head assembly (2) to mount it on the shaver (a click will be heard) (Fig11).
Accessories
The following accessories are included with the product: Charger; Brush.
Environmental Protection
-
To discard the product, please don’t put it together with general domestic rubbish heaps but hand it to the officially designated recycle center for the environmental protection (Fig 12).
-
The built-in rechargeable battery contains substances which may pollute the environment, so it must be unloaded from the product or sent to the officially designated recycle center to be disposed before it is discarded.
The battery should not be unloaded unless it has been used up.
- Unplug the charger and also pull out the product’s plug from the shaver
- Unload the battery. Do not plug in the shaver again after unloading the battery.