Apps HITEMP App User Manual
- June 10, 2024
- APPs
Table of Contents
Apps HITEMP App
User Privacy Instructions
We take your privacy very seriously and we promise to inform you how we use the data. Users’ private data, such as mailboxes, address, before uploading to the cloud, we will get your permission, and we will work hard to protect your data security.
Description
- Receive data signal from cloud server and transmit to the main device;
- Receive data signal from main device and transmit to cloud server;
- To achieve remote upgrade the WiFi module baseplate MCU by cloud server;
- To achieve the remote upgrade of the main device by WiFi module baseplate MCU.
Technical Parameters
- OPERATING VOLTAGE: DC8V~12V (Recommended value 12V)
- OPERATING CURRENT: Max. recurrent peak lA, average standby current S0mA
- TEMP. RANGE: Operating Temp.: -30°C~+70°C; Storage Temp.: -40°C~+85°C
LED INDICATOR LIGHT:
4 lights, Network configuration indicator, router connection indicator, cloud
server connection indicator, 485 communication indicator; DIMENSION(LXWXH):
78mmX63mmX24mm
Installation
- There is a magnet on the back of the WiFi module, it can be installed indoors or outdoors, and avoid direct sunlight;
Functional Description
Account Login
Use email address and password to register, login or reset the password.
-
Account Registration: To register an account, click 1{Fig.1) to jump to the Account Registration interface, fill in the relevant information and click 2 to receive verification code, while completed the application information, click 4 to read the details of the Privacy Policy, then click ©to agree, and click 5, registration is done.
Please note, the valid time of one verification code is 15min, please fill in the verification code within 15min, otherwise you need to ask for a new one. -
Log in: Follow the instructions on the page{Fig.1 ), enter your registered email address and password, click 6 and jump to device list;
-
Forgot Password: While forget your password, click 8 {Fig.1 ), jump to the Forgot Password interface {Fig.3 ). Follow the instructions on the page, fill in the relevant information’s, click 7 to receive verification code from your mailbox, click 9 to confirm and password reset is done.
Add Device
After login, displays My Device interface {Fig. 4) , follow the instruction to
add WiFi or DTU.
WiFi Configure Network
-
Follow the instructions on the page (Fig. 7), press button on module and hold for ls till two lights on, then AP connection is activated, click 10 to confirm, click 11 to turn the page;
-
Click 12 to enter the WiFi password for the current connection, click 13 to confirm;
-
Jump to system settings, connect specified WiFi, click 14 to select the “Smart_ AP _xxx” , click 15 to popup window(Fig.10), follow the instruction and then jump to WiFi setting interface(Fig.11);
-
Slide the page back to configure network interface, click 16 to turn next page {Fig. 12), click 17 to join WLAN Network, click 18 to cancel{Fig. 13); click 19to bond device {Fig. 14);
-
Click “OK” (Fig.15) to allow the App to use the camera for scanning the Barcode on the heat pump unit {Fig.16);
-
Click “OK” , device bond is done {Fig.17);
-
After WiFi and DTU bonding is done, and jump back to the main interface of device{Fig. 18).
Device Management
Device management operations are as below:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>