MOHAWK FlexLok Plus Tab System User Manual
- June 10, 2024
- MOHAWK
Table of Contents
MOHAWK FlexLok Plus Tab System
PERFORMANCE
- Exceeds all performance expectations without compromise
- FlexLok+ works with all Mohawk modular products with the exception of Walk Off Tile and EcoFlex Air products
SUSTAINABILITY
- HPD and CRI Green Label Certified
- Minimal VOCs for increased indoor air quality
INSTALLATION
- Install a flexible floating floor, no glue on the subfloor
- Install on any substrate (VCT, wood, etc.)
- FlexLok+ adhesive will not dry out so installation can be installed at your own pace
- Can be installed as long as there are no visible signs of moisture
Install Methods – Tile 24×24
Quarter Turn, Monolithic, and Multi-Directional
Lay anchor rows and place a FlexLok+ tab at every joint. Install remaining carpet tiles using a step method, placing FlexLok+ tabs at each joint. Place a FlexLok+ tab at every joint around the perimeter of the room.
Install Methods – Plank 12×36
All Install Methods
Lay anchor rows and place a FlexLok+ tab at every joint. Install carpet using a step method placing a FlexLok+ tab at every corner.
Install Methods – Tile 24×24
Brick and Ashlar
Lay anchor rows and place a FlexLok+ tab at every joint. Install remaining carpet tiles, placing FlexLok+ tabs as illustrated in the diagram. Place a FlexLok+ tab at every joint around the perimeter of the room.
Install Methods – Plank 12×36
All Install Methods
Must be used in middle of length as well as four corners.
NOTE: Included above are recommended methods of installation most frequently used. Additional installation methods may be available based on product selection.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>