Kruger Matz KM0562 Spiral Wireless Speaker Owner’s Manual

: June 10, 2024
: Kruger Matz

Table of Contents

SAFETY INSTRUCTION
DESCRIPTION
OPERATION
SPECIFICATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Its YOUR LIFE
JUST TAKE IT
Wireless speaker
KM0562
Owner’s Manual

SAFETY INSTRUCTION

Place the device on flat, stable surface.
Do not place heavy objects on the device.
Do not place anything in speakers interior.
Do not place the device in close proximity to heat sources, such as radiators etc. Do not place the device on unstable surfaces.
Position the device in a properly ventilated place. Do not obstruct ventilation by covering ventilation openings.
Protect this device from humidity, water and other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
Keep the volume at a reasonable level throughout entire time of using the speaker. To prevent damage to your hearing, do not raise the volume too high.
If you experience tinnitus, discomfort or other concerning behaviors, stop using the device immediately.
Make sure, that the device is placed away from electrical devices that generate interference.
Disconnect from power outlet if the device is not going to be used for a long time.
Do not handle this device with wet hands.
Do not use this device if it has been damaged.
Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
Always disconnect the product from the power source before cleaning.
Clean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.

DESCRIPTION

1. Mute button	13. Microphone priority
2. Microphone voice effects changing button	14. Volume down sound from

Kruger Matz KM0562 Spiral Wireless Speaker -
DESCRIPTION

1. Power button	6. Volume down sound from microphone
2. Mode button	7. Volume up sound from microphone
3. Previous track button	8. Volume down button
4. Play / pause	9. Volume up button
5. Next track button

Microphone 6,3 mm input
AUX 3,5 mm input
USB port
DC charging port

OPERATION

Turning on / off / volume adjustment
To turn on the speaker, press and hold the power button for about 2 seconds. Follow the same procedure to turn off the speaker. To increase or decrease the volume keep pressing volume up/down button until the desired value is reached. The speaker illumination turns on automatically when you turn on the device.
Playing via Bluetooth
If there is no external device connected (USB), the speaker will automatically go to Bluetooth mode, after turning it on. If there is an external device connected, press the mode button or Bluetooth button on the remote control, to go to Bluetooth mode. On the external device, search for Bluetooth devices and connect to the speaker (KM Spiral). Played music can be controlled on the external device, with the buttons on the speaker or by the remote controller.
Playing via USB
After plugging the USB drive, the speaker will automatically go to USB mode. To control played music, use buttons on the speaker or use remote controller.
Playing via AUX
After connecting to the AUX socket, keeping press the mode button until the AUX mode turns on. Use your source device to control the music that is playing.
Microphone
After connecting the microphone to the microphone input, it can be used immediately. Note: microphone cord has to be mono. The set also includes a wireless microphone that connects to the speaker immediately after turning it on (microphone not included is set).
TWS function
TWS function allows for playing from one source on two speakers. After turning on the speakers, simultaneously press and hold the TWS button on both speakers. Connection will be signaled with an audio cue. After connecting the external device, the sound will be played on both speakers.
Recording and playback of sound recordings
The speaker has the function of recording and playing sound.
To use this function, connect the external memory to the USB port of the device and connect the microphone (not included).
Charging
The low battery level will be indicated by the flashing LED indicator. To charge the speaker, connect the plug of the included mains charger to the speaker charging port, and the charger itself should be connected to a mains socket. While charging, power button will be lit red.

SPECIFICATION

Power: 36 W
Impedance: 4 Ohm
Frequency response: 50 Hz – 15 kHz
S/N ratio: 83 dB
Drive units: 5,25″ + 1″
Bluetooth: 5.0
Supported formats: MP3/WMA/FLAC
TWS function (connect two speakers)
Protection class: IPX4
Remote control
I/O:
- USB port 2.0
- Microphone input (Jack 6,3 mm)
- AUX input (Jack 3,5 mm)
- DC charging port
Remote control power supply: 2 x AAA battery
Battery: 7,4 V / 4400 mAh
Dimensions: 291 x 130 x 288 mm
Weight: 2,4 kg

Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that Wireless speaker KM0562 is consistent with directive 2014/53/ UE.
Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.pl.
LEARN MORE
For more information on this device visit: www.krugermatz.com.
Read owner’s manual carefully before using.
Visit www.krugermatz.com website for more products and accessories.
In case of any doubts or questions reach out to our Frequently Asked Questions section.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

www.krugermatz.com
is a registered trademark