ENFORCER 900MHz HL Sereis RF Transmitter and Receiver Owner’s Manual
- June 10, 2024
- ENFORCER
Table of Contents
ENFORCER 900MHz HL Sereis RF Transmitter and Receiver Owner’s Manual
The ENFORCER 900MHz* HL Series RF transmitters and receivers use digital modulation for improved immunity to interference, better signal penetration in environments with heavy obstructions, and significantly longer range of up to 1,800ft (550m)1 line of sight. The ultra-low power consumption gives you up to 10-years battery [if& using common CR2032 coin cell batteries.
- Actual frequency, 917MHz
- Actual operating range will vary depending on the installation and operating environment
- Based on ten 1-second button presses per day.
Applications
Benefits
Consistent performance in adverse environments
Environmental Interference
- Range up to 1,800ft (550m)*
- Improved immunity to background interference
- Better penetration through physical obstacles
- Actual operating range will vary greatly depending on the installation and operating environment
Consistent performance as voltage drops
Consistent performance as temperature varies Long”
HL Series: 900MHZ Consistent Performance Even as Temperature Rises or Falls
PCB antenna
- PCB antenna, no antenna to be installed, adjusted, vandalized, or damaged
Installer and User Friendly
- Wide voltage range for more application environments
- 2 Outputs to control 2 devices or 2-door systems
- Up to 99 button codes per channel
- 5 Individually programmable output modes
- Digital LED display indicates RF reception and programming functions
Receiver Specifications
| Frequencies available | 917MHzt |
|---|---|
| Memory capacity | Up to 99 button codes per channel |
| Operating voltage | 10-24 VAC or 9-48 VDC |
| Operating current | Standby |
| Active | 100mA@12VDC/50mA@24VDC/ |
25mA@48VDC per channel
Relay output| Type| Independent, sequence, access control
Modes| 1-99 seconds momentary, 1-99 minutes momentary,
toggle, latch, follow (validity)
Relay contact rating| 2x Form C 10A@14VDC
Connectors| Screw terminals:
Power (+,-), 2 relays (NO/NC/COM)
LED Digital display| Signal strength, programming functions, etc.
Operating temperature| – 40°-167° F (- 40°-75° C)
Dimensions| 37/8″x21/16″x13/16″ (99x62x30 mm)
Transmitter Specifications
| Frequencies available | 917MHzt |
|---|---|
| Battery | CR-2032 x 2 |
| Dimensions | 31/16″x15/16″x1/2″ (78x34x13 mm) |
868MHz also available and has CE. Contact SECO-LARM for details.
Transmitters
Receiver
1-Channel and 2-Channel
OEM/ODM Welcome
SECO-LARM has a full range of ENFORCER RF transmitters and receivers for applications from access control to perimeter security to home automation and more. We can manufacture products under your brand and with your logo. All products are FCC or CE certified to bring your product to market faster.
Tel: 800-662-0800
Fax: 949-261-7326
Email: sales@seco-larm.com
Website: www.seco-larm.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>