PHILIPS EasySense SNS212 MC Fixture Mount Sensors Installation Guide
- June 10, 2024
- Philips
Table of Contents
PHILIPS EasySense SNS212 MC Fixture Mount Sensors Installation Guide
Wireless Node Part Number
LED Drivers
The EasySense SNS212 MC sensors are compatible with Xitanium SR drivers. To
find the SR
driver that fits your application needs and for product specifications, please
visit
www.Signify.com/xitaniumsr
Wiring Diagram
- Wiring diagram for 40W driver shown. Other drivers have different wiring diagrams. Consult datasheet for driver for applicable wiring diagram.
Sensor Dimensions (in/mm)
Mounting Dimensions (in/mm)
Mounting in U-shaped slot in sheet metal (max thickness 1 mm)
Fixture with Easy Sense installed
Mounting in a slot
Mounting in a cut-out with mounting ring
Specifications
Note: Below data applicable for SNS212 MC..
Operation and Configuration via Mobile App
SNS212 MC requires commissioning to operate. The node can be commissioned and
configured via the Philips MasterConnect app through Bluetooth LE. For a
complete description of the features and default settings—as well as details
on the app—refer to
www.philips.com/easysense.
FCC and IC Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules for the United States
and Industry Canada (IC) license-exempt RSS standard(s). These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment and is intended for
commercial use only.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications not expressly approved by Signify could void the user’s authority to operate this equipment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
© 2023 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
Signify North America Corporation
400 Crossing Blvd, Suite 600
Bridgewater, NJ 08807
Tel. 855-486-2216
Signify Canada Ltd.
281 Hillmount Rd,
Markham, ON, Canada L6C 2S3
Tel. 800-668-9008
Read More About This Manual & Download PDF:
References
- EasySense Fixture-Mount Sensor - Philips lighting
- Xitanium Sensor Ready Drivers | Advance | Signify Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>