FLEXIHIRE 1500-3000 PSI Water Pressure Cleaner Instructions
- June 4, 2024
- FLEXIHIRE
Table of Contents
Safe Operating Procedure
Water Pressure Cleaner
Instructions Manual
PPE Required
General Safety Instructions
- Complete pre-start checklist
- Read Manufacturers Operation Manual ( www.flexihire.com.au)
- Report any faults or damage to Flexihire 1300FLEXIHIRE
- Do not wear loose clothing or jewelry
- Do not operate equipment near pedestrians or people
- Do not operate without the appropriate PPE as detailed
- Do not operate equipment under the influence of drugs or alcohol
General Engine Safety
- Refueling - Do not smoke, or introduce an ignition source, always turn the engine off and allow the engine to cool first, relieve fuel pressure by loosening the cap slowly, and wipe clean any fuel spills prior to re-start, If fuel spilled on clothes change clothes, ensure cap is replaced & store fuel vessel away from the work area
- Do not breathe fuel vapor & replace the cap securely after fuelling
- Do not operate the engine without adequate ventilation
- Never operate indoors without adequate air flow from outside
- Beware of hot surfaces on engine & other parts
General Electricity Safety
- Ensure all electrical equipment has a current test tag within 3 months
- Do not operate equipment in or around water or damp environments
- It is recommended to use a safety switch to power this equipment
- Ensure the power lead is well stowed and does not present trip hazards
- Isolate the power by removing the plug prior to performing any work on the equipment including prior to changing leads or tools or bits
Risk Assessment
- Assess the immediate work area for any hazards
- Control or eliminate all the risks associated with the hazards
- Hazards to check for that may require risk control
❑ Overhead power lines
❑ Digging
❑ Confined space
❑ Traffic & moving machinery
❑ Stored energy – air, hydraulic, electricity, pressure
❑ Working at height
❑ Falling objects
❑ High Voltage
❑ Any stored energy
In the event of Emergency
Injuries from high-pressure water jets can be serious
- Seek medical attention immediately
- Inform the Doctor of the nature of the injury
- Show the Doctor the Operation Manual
- Inform the Doctor of the type of water source and what was being done at the time
Operating Safety Instructions
Inspect the machine prior to operation to ensure no damage| Ensure all hoses,
attachments and tools are well secured and pins inserted
---|---
Pressure cleaners produce very pressure jet streams that should never be used
for cleaning body parts or other people| Always ensure water is turned on
prior to starting the pressure cleaner
Ensure electric cables are kept dry and out of water areas and water puddles|
Unroll the high-pressure hose prior to starting and ensure there are no kinks
Never direct water flow to another person. Ensure that no other person is
standing near the operating mechanism of the water jet. Barricade the work
area and erect warning signs so to prevent access from other persons.
Never leave the machine unattended and running
Beware of Children
• Beware of children as they may approach without notice.
• Never allow children to operate the cleaner
• Never leave the cleaner unattended as a child may depress the trigger|
Starting with engine-driven models
• Ensure the main switch is off
• Turn to choke on
• Open fuel
• Pull the cord twice to prime the engine
• Now turn the main switch on and pull the cord to start
• Turn to choke off
Always wear eye protection when working with compressed water jets as objects
may be directed back toward the operator.
Water pressure cleaners are also very loud and hearing protection should be
used.| Shutting down engine-driven models
•Turn the main switch off
•Turn the fuel supply off
•Turn the water supply off
•Release pressure by depressing the trigger
•Allow to cool and then pack away (be careful not to kink the hose)
Beware of the heat that the cleaner will generate. Never place near
combustible materials and allow them to cool.| Before disconnecting, hoses and
tools ensure the compressor is shut off and all water pressure is released
Report any water leaks and if excessive does not operate. If leaking on the
pressure side, cease operation immediately and report.| Always hold the
pressure gun firmly with both hands. The cleaner operates with very high
pressure and when activated will kick back.
Never clean live electrical components as severe damage or death may result.
Never attempt to adjust the pressure or engine speed – This is pre-set| For
Hot water cleaner models. Beware of the hot water and never direct it toward
the skin of any person. Beware the unit may dump hot water at times
– refer to the operation manual.
Never blast toward fuel, fuel tanks, chemicals, or vessels containing harmful
substances as the contents may be splashed everywhere| Keep hands away from
all moving parts
FMS10-5.1.3.9.18 SOP Water Pressure Cleaner
Version #: FLX 3.1
Issue: October 2021
Review: October 2026