ParrotUncle AT52-02A-01 Aerofanture 52 Inch Modern Indoor Outdoor Matte Black 6 Fan Instruction Manual

ParrotUncle AT52-02A-01 Aerofanture 52 Inch Modern Indoor Outdoor Matte

Black 6 Fan

Product Information

Product Name
An R-C Ceiling Fan

Model Number
AT52-02A

Safety Precautions

• Before beginning the fan installation or servicing the fan or installing accessories, shut the power off at the fuse or circuit breaker.
• Read all instructions and safety information carefully before installing your fan and save these instructions.
• Make sure all electrical connections comply with local codes or ordinances and the National electrician.
• Make sure you have a location selected for your fan that allows clear space for the blades to rotate, mounted at least thirty (30) inches from walls or other upright structures.
• The outlet box and ceiling support joist used must be securely mounted, and capable mount to the outlet box marked acceptable for fan support and use mounting screws provided with the outlet box. The box must be supported directly by the building structure.
• After installation is completed, check that all connections are absolutely secure.
• Do not separate the reverse switch until the fan has come to a complete stop.
• Do not insert anything into the fan blades while they are rotating.
• To reduce the risk of personal injury, do not bend the blade brackets (also referred to).
• To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
• Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.

Product Usage Instructions

1. Before starting installation or servicing, turn off the power at the fuse or circuit breaker.
2. Read all instructions and safety information carefully before installing your fan.
3. Choose a location for your fan that allows clear space for the blades to rotate and is at least thirty (30) inches from walls or other upright structures.
4. Make sure the outlet box and ceiling support joist are securely mounted and capable of supporting the fan. Use the mounting screws provided with the outlet box, and ensure the box is supported directly by the building structure.
5. Install the fan according to Steps 01-11 in the manual.
6. Follow Steps 01-06 in the manual to operate your remote control.
7. After installation, check that all connections are secure and the fan is not wobbling or making excessive noise. If necessary, refer to the manual for troubleshooting tips.
8. To clean the fan, use a dry dust cloth or lightly dampened cloth. Do not use water or detergent.

INSTALLATION & OPERATING INSTRUCTIONS FOR THE AEROCAPTURE OWNER’S INSTALLATION, MANUAL

WARNING: SHUT POWER OFF AT THE FUSE OR CIRCUIT BREAKER

THANK YOU FOR YOUR PURCHASE

Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the product.

SAFETY TIP

1. To avoid possible electric shock. turn off the electricity at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories.

2. Read all instructions and safety information carefully before installing your fan and save these instructions.

3. Make sure all electrical connections comply with local codes or ordinances and the National electrician.

4. Make sure you have a location selected for your fan that allows clear space for the blades to rotate, mounted at least thirty (30) inches from walls or other upright structures.

5. WARNING: The outlet box and ceiling support joist used must be securely mounted, and capable
   mount to the outlet box marked acceptable for fan support and use mounting screws provided with the outlet box. The box must be supported directly by the building structure.

6. WARNING: “acceptable for fan support” and use mounting screws provided with the outlet box most outlet

7. Electrical diagrams are for reference only. Light kits that are not packed with the fan must be

8. UL is listed and is suitably marked with the designated fan model you are installing. Switches must be UL general-use switches. Refer to the instructions packaged with the light kits and switches for proper assembly.

9. After installation is completed, check that all connections are absolutely secure.

10. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

11. WARNING: fan speed control device, or rheostat.

12. Do not separate the reverse switch until the fan has come to a complete stop.

13. Do not insert anything into the fan blades while they are rotating.

14. WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to

15. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.

16. Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.

17. WARNING: Chemical Burn Hazard. Keep batteries away from children. This remote contains a lithium button cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment is not closed securely, stop using the product, remove the batteries, and keep them away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

18. Dispose of batteries properly and keep them away from children. Even used batteries may cause injury.

NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense and caution are necessary factors in the installation and operation of this fan.
NOTE: This product is not intended for use by people (including children) with reduced physical, sensory, or mental capabilities that are different or are impaired, or lack experience or knowledge, unless such persons are supervised or trained to operate the appliance by a person responsible for their safety.
NOTE: Children should be supervised to ensure that they do not use appliances as a toy.

UNPACKING YOUR FAN

TOOLS REQUIRED

CONTAINS:

• Hanger bracket
• Downrod
• Canopy
• Canopy Cover
• Coupling Cover
• Fan Motor Assembly
• Blades x 3
• Receiver + Remote control incl.
• Loose parts bag containing
• Blade screw
• Hexagon Wrench
• Screw nuts
• Cable hardware (1pc per item)

INSTALLING YOUR FAN

OPERATING YOUR REMOTE CONTROL

Installing the Remote Control: FOLLOW STEP 01-06

Restore power to the ceiling fan and test for proper operation . AFTER INSTALLATION

“WOBBLE” The fan blades have been adjusted in the factory to minimize any wobble
NOTE: CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY ARE MOUNTED ON A RUBBER CROMMET. IF THE FAN WAS MOUNTED RIGIDLY TO THE CEILING, IT WOULD CAUSE EXCESS VIBRATION. MOVEMENT OF A FEW CENTIMETERS IS QUITE ACCEPTABLE AND DOES NOT SUGGEST ANY PROBLEM TO REDUCE THE FAN WOBBLE: PLEASE CHECK THAT ALL SCREWS WHICH SECURED THE MOUNTING BRACKET AND DOWNROD ARE SECURE.
BALANCING A WOBBLING CEILING FAN: For your convenience, a Balancing Kit is included; please follow this procedure when balancing the fan:

1. Check that all blade and blade arm screws are secure.
2. Most fan wobbling problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure this distance. Rotate the fan until the next blade is positioned for the same measurement.
3. Repeat for each blade. The distance deviation should be equal to 1/8″(0.32cm).
4. Use the enclosed Blade Balancing Kit if the blade wobble is still noticeable.
5. If the blade wobble is still noticeable, interchanging two adjacent (side-by-side) blades can redistribute the weight and possibly result in smoother operation.

WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE ARM WHILE INSTALLING, BALANCING THE BLADES, OR CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.
NOISE: When it is quiet (especially at night) you may hear occasional small noises. This is normal. Please allow a 24-hour “breaking-in” period, most noises associated with a new fan disappear during that time.
CARE AND CLEANING

1. Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint-free clean your fan.
2. Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock.
3. The motor has a permanently lubricated ball bearing. No need for oil.

NOTE: MAKE SURE THE POWER IS OFF AT THE ELECTRICAL PANEL BOX BEFORE YOU ATTEMPT ANY CLEANING OR REPAIRS.

Ceiling Fan Installation Manual

References

• Aerofanture Limited Company

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>