SVEN RX-G860 Gaming Mouse User Manual

Gaming Mouse
RX-G860
USER MANUAL

RX-G860 Gaming Mouse

Congratulations on your purchase of the SVEN gaming stereo headphones!
COPYRIGHT
© SVEN PTE. LTD. Version 2.0 (17.01.2023).
This Manual and information contained in it are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur.
The information in this Manual is given on “as is” terms. The author and the publisher do no bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual.

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Check up the package contents and availability of the warranty card. Make sure the warranty card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods number corresponds to that in the warranty card. Remember: in case of warranty card loss or discrepancy of numbers you forfeit the right for warranty repairs.
• Before installing and using the speaker system, read this Manual carefully and keep it for future reference.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufact ure of the product is indicated on the box.

PACKAGE CONTENTS

• Gaming mouse — 1 pc
• Operation Manual — 1 pc
• Warranty card — 1 pc

APPLICATION

RX-G860 gaming mouse is an input device. It is designed for entering (entering) information into the computer, as well as controlling the operation of the computer.

SYSTEM REQUIREMENTS

• ОS Windows.
• Free USB port.

PREPARATION TO WORK

• Connect the gaming mouse to an available USB connector on the PC.
• After connecting to the USB port, the PC will automatically recognize the device.
• To configure buttons, lights and macros, you need to install the software downloaded from the website www.sven.fi). Run the previously downloaded file to install the driver, follow the installer’s advice. Administrator rights may be required.
• After installation, the program will automatically detect the presence of the mouse. You can call up the control window using the icon in the taskbar or in the Windows system tray.

KEY ASSIGNMENTS AND MOUSE SETTINGS

• Initially, all mouse buttons are set to their default settings (as in the picture below). However, the user can change the function of these keys.
• You can reassign the buttons by clicking on the menu items, thereby calling up a pop-up menu in which you can redefine keys, assign a macro (pre-configured keyboard shortcut options), bind functions to the multimedia key (adjusting the volume,  turning off the volume, controlling the player, etc.)

Attention! The field with number 1 can be reassigned only if you reassign the function of the left mouse button to any other button, otherwise a warning window will appear.
All changes to the settings are saved to the internal memory of the mouse, so all configured mouse functionality will be saved after restarting the PC or removing the mouse from the USB port of the PC.

CHANGING MOUSE FUNCTIONS

The function of the mouse buttons canbe changed by assigning a differentfunction to the buttons. The numberingof the mouse buttons (the image in themiddle of the screen) corresponds to thelist numbers from 1 to 8. Clicking on themenu items will cause a pop-up window with additional functions that can be re-assigned.

• Left button – left mouse button.
• Middle button – middle button, button under the wheel.
• Right button – right mouse button.
• Back – previous page.
• Forward – next page.
• DPI Cycle – switching DPI resolution in a circle.

ADDITIONAL FUNCTIONS
Functions that make it easy to work in different applications.

• Extended – opens up additional options for settings.
• Desktop – minimizes all open windows.
• Double tap – double click emulation.
• Fire – generates button presses and releases.

• Cycle Backlight – backlight mode change.
• DPI + – increasing DPI resolution.
• DPI – – decrease DPI resolution.

MULTIMEDIA FUNCTIONS

• Browser – new tab in browser (open browser).
• Media player – start audio player.
• Mail – mail client launch.
• Sound + – volume increase.
• Sound – – volume down.
• Previous – previous track.
• Next – next track.
• Mute – mute.
• Play/Pause – play/pause.
• Calculator – calculator application.

MACRO

Assigning a previously written macro from the dropdown list.
Hot button

• Copy – copy of the selected fragment.
• Insert – insert the selected fragment.
• My computer – opening explorer.
• Cancel – undo last action.
• Block. PC – computer lock.
• Close a window – close active window.
• Choose all – text selection.
• Find – search line.

ADDITIONAL SETTINGS

• Cursor precision – allows you to increase or decrease the precision of the pointer (cursor).
• Scroll speed – the speed at which the wheel is scrolled.
• Rate of fire – double-click frequency of the «Fire» function.
• Polling frequency – a parameter that specifies the number of times the mouse sends data about various user actions to the computer in one second.

On the right side of the screen, there are settings for the sensor resolution, DPI.
By clicking on the numeric value above the colored bar, you can adjust the desired sensor mode resolution by moving the slider below.
By clicking on the color bar under the value, you can select the highlight color from the Windows palette for this mode:

There are 6 sensor modes available, by clicking on the fields of the squares above the digital value, you can enable/disable the desired mode.

ADJUSTING THE MOUSE ILLUMINATION

You can select the backlight mode by clicking on the line of the drop-down list.
By clicking on the colored squares and the fields below them, you can choose the desired colors from the Windows palette. The «Brightness» slider changes the brightness of the backlight, the «Cycle» slider changes the speed of the backlight mode.

• Symmetrical – symmetrical lighting of the LEDs relative to the longitudinal axis of the mouse.
• Counterclockwise – turn on the LEDs counterclockwise.
• Vice versa – LED lighting in clockwise direction.
• In both directions – alternate change of modes «Against the hour of the hand» and «Vice versa».
• Magic – smooth color change without extinguishing LEDs.
  These options are not available for all backlight modes.

CREATING MACROS
The «Macro» tab lets you create precise sequences of keystrokes and button presses. This tab also allows you to customize macros to perform the desired tasks. Assigning a macro to a key makes it easy to perform complex, repetitive operations. To create a macro, do the following:

1. Right-click in the «Macro» field, click on the «New macro group» line:
2. Right-click on the line «New macrogroup», in the drop-down list select the line «New macro»:

Press the «Record» button and then you must sequentially press the key combination that you want to use in the future. The keys pressed will be displayed in the «Contents» field.
To end the recording, press the «Stop» button. The program will save the macro settings.
Attention: When entering macros, the entered characters will only be of the language which interface will be active at the moment. For example, if macros are recorded from the English interface, then the characters will be in English, it is impossible to switch the input language from English to Russian and vice versa.
If necessary, you can use additional commands in the pop-up window when you left-click on the «Add» button.

2. Right-click on the line «New macrogroup», in the drop-down list select the line «New macro»:

In the right part of the window, there are 3 modes of macro processing:

• Execute while the button is pressed – execute the macro while the button is pressed;
• Execute until the button is pressed – execute the macro until the button is pressed again;
• Number of repetitions – the number of repetitions of the macro that were entered in the field next to it.

Saving, loading a profile By default, the profile is set to «Office». There are four preinstalled profiles in total.

Profile settings can be saved to a file by clicking the «Upload». The «Load» button loads a previously saved file. The «Reset» button returns the software to the default settings. Button «Apply» saves the software settings.

BACKLIGHT TO THE BEAT OF THE MUSIC
This mode captures the audio stream of music, games, movies, etc. and its synchronization with the backlit mouse.
Attention! The correct operation of this mode depends on the configuration of the PC hardware. This mode works only with running software.

TECHNICAL SPECIFICATIONS

Notes. Technical specifications given in this table are supplemental information and can-not  give occasion to claims. Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Technical support is on www.sven.fi.

Model: RX-G860
Importer: Tiralana OY, Office 102, Kotolahden-tie 15, 48310 Kotka, Finland.

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, № 02-02, Singapore, 427447.
Produced under the control of Oy Sven Scandinavia Ltd.
15, Kotolahdentie, Kotka, Finland, 48310. Made in China.
® Registered Trademark of Oy SVEN Scandinavia Ltd. Finland.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>