SOMOGYI ELEKTRONICS SF 43 BK Foot Fan Instruction Manual

: June 10, 2024
: SOMOGYI ELEKTRONICS

Table of Contents

SOMOGYI ELEKTRONICS SF 43 BK Foot Fan
STRUCTURE
IMPORTANT SAFETY INSTRUCTIONS
ASSEMBLING AND SETTING UP THE DEVICE
CLEANING
TROUBLESHOOTING
DISPOSAL
CHARACTERISTICS
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOMOGYI ELEKTRONICS SF 43 BK Foot Fan

Product Information

The SF 43 BK and SF 43 WH are standing fans with a 2L2-1 motor.
The fan has a front grill with fixing tabs, a fan blade fixing bolt, a fan blade, a rear grill fixing screw, a rear grill with carrying handle, a motor shaft, a front part of motor housing, a motor housing, a grill fixing nut, a grill fixing screw, a motor holder, the back part of the control panel, a fan fixing bolt, the top part of the stand, a height fixing ring, mode switches, the front part of the control panel, the bottom part of the stand, a plastic cover, an upper metal base, a plastic locking element (4 pcs), and a lower metal base.

The device should not be used by individuals with reduced physical, sensory or mental capabilities. The power cable should not be run under a carpet or mat. The device should be positioned
so that the plug is easily accessible and cannot be unplugged accidentally or tripped over. Technical data and design are subject to change without notice due to continuous developments. The latest
operating instructions can be downloaded from www.somogyi.hu.

Product Usage Instructions

Before using the product, read and keep the operating instructions carefully.
Make sure the device is positioned on a flat surface.
Assemble the fan by attaching the front and rear grills to the motor housing using the fixing screws and nuts provided.
Attach the fan blade to the motor shaft using the fan blade fixing bolt.
Attach the motor holder to the back part of the control panel.
Attach the top part of the stand to the height fixing ring.
Attach the plastic locking elements to the upper and lower metal bases.
Attach the bottom part of the stand to the plastic locking elements.
Connect the power cable to the device.
Plug the device into an electrical outlet.
Turn on the device using the mode switches on the control panel.
Adjust the height of the fan using the height-fixing ring.
To clean the fan, turn off and unplug the device. Remove the front and rear grills and wipe them with a damp cloth. Use a soft brush to clean the fan blade and motor housing. Do not use abrasive cleaners or immerse the device in water.

STRUCTURE

(Figure 1.)

SOMOGYI ELEKTRONICS SF 43 BK Foot Fan-fig2

| EN
---|---
| STRUCTURE

(Figure 1.)

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!

WARNINGS

Before using this product, please read and keep the following operating instructions. The original language of the description is Hungarian.
This device should not be used by individuals with reduced physical, sensory or mental capabilities, or who lack experience and knowledge, while children aged 8 years and older must be supervised or instructed in the safe use of the device and understand the hazards involved. Children should not play with the device. Children may clean the device or perform user maintenance only under supervision.
Ensure that the device was not damaged during transport.
The device must not be used in combination with a programmable switch, time switch or separate remote-controlled systems, etc., which can independently switch the device on, as the possible covering or incorrect positioning of the device may cause an accident.
Never use in areas where flammable vapours or explosive dust could be released. Do not operate in flammable or explosive environments.
Operate only under constant supervision.
Do not operate around children without supervision.
Suitable for use in dry indoor conditions only. Keep away from humid environments (e.g. bathrooms, swimming pools).
DO NOT use the device in the vicinity of a bathtub, sink, shower, swimming pool or sauna.
Do not use the device in vehicles or in confined spaces (< 5 m2) (e.g. elevator).
If the device will not be used for a longer period of time, switch it off and unplug it from the wall socket.
Before moving the device, always disconnect it from the power supply.
Only move it by the carrying handle.
If you notice any irregularities (e.g. an unusual noise coming from the device or a burning smell), switch it off and disconnect the power supply immediately.
Take care that no objects or liquids penetrate through the openings.
Do not allow exposure to dust, humidity, sunlight or direct heat.
Disconnect the appliance before cleaning by unplugging it from the power supply.
Before removing or replacing the protective grill, disconnect the fan by unplugging it from the power supply.
Never touch the device or the power cable with wet hands.
Only connect to 230 V~ / 50 Hz sockets.
Unwind the power cable completely.
Do not run the power cable across the device.
Do not run the power cable under a carpet, mat, etc.
Position the device so that the plug is easily accessible and can be unplugged.
Run the power cable so that it cannot be unplugged accidentally or tripped over.
Technical data and design are subject to change without notice due to continuous developments.
The latest operating instructions can be downloaded from www.somogyi.hu.
We do not assume any responsibility for printing errors and apologise for any inconvenience caused.
Only for personal, not industrial use!

Danger of electric shock! Do not dismantle or modify the device or its accessories. In case of damage to any part, unplug it from the power supply immediately and contact a qualified electrician.
If the power cable is damaged, only the manufacturer, its repair service provider or a similarly qualified technician should replace it!

ASSEMBLING AND SETTING UP THE DEVICE

Remove the packaging with care to avoid scratching the plastic coating with scissors or a knife.
Insert the upper metal base (22) into the lower metal base (24) in the middle.
Screw the bottom part of the stand (20) onto the assembled cross-shaped base (17).
Insert the locking elements into the ends of the bases.
Cover the stand fixing screws with the plastic cover (21).
Attach the fan motor with the control panel to the top part of the stand (15) and secure it with the bolt (14).
Place the rear part of the grill (5) onto the motor so that the small borehole on the rim of the grill is at the bottom. Secure the rear grill with the plastic screw (4).
Place the blade (3) on the motor shaft and secure it with the blade fixing left-hand thread screw (2).
Hang the front grill onto the rear grill at the top. Secure the front and rear grills to each other with the small bolt and nut (11, 10).
Finally, complete the assembly by closing the grill fixing tabs.
Position the device on a solid, level surface, away from radiating heat and naked flames.
Connect it to the power supply (230 V~ / 50 Hz).

CLEANING

For the optimum operation of the device, its cleaning frequency depends on the level of contamination, but it may be required at least once a month.

Before cleaning, switch off the device and disconnect it by unplugging it from the power supply.
Attention! When the fan is disconnected from the power supply, remove the front of the protective grill.
Clean the outside of the device with a slightly damp cloth. Do not use an aggressive cleaning agent. Water must not get inside the device, onto its electrical components.
Attention! While the fan is disconnected from the power supply, replace the protective grill of the fan.
Restart the fan only therafter.

TROUBLESHOOTING

Malfunction	Possible solution to the malfunction
The fan does not switch on.	Check the power supply.

Check the mode switches.
The fan does not oscillate.| Check the oscillation toggle switch.

DISPOSAL

Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

CHARACTERISTICS

nominal blade diameter: 40 cm • with mechanical buttons • 3 speeds• oscillation option • adjustable tilting • adjustable height: 100 – 120 cm

FAN OPERATION
The fan can be switched on and the desired speed selected with the mechanical buttons (1, 2, 3).
The oscillation can be turned on by pushing the toggle switch (9) down, which will start the oscillation of the fan back and forth. The function can be switched off by pulling the toggle switch (9) upwards.
You can deflect the horizontal airflow of the fan to slightly upwards or downwards. For this, simply hold the motor and tilt it backwards or forwards. The fan is switched off by pressing the ‘0’ button.