Olympia Lighting DS-WP LED Control System User Manual
- June 10, 2024
- Olympia Lighting
Table of Contents
DS-WP LED Control System
User Manual
DMX512-SPI Decoder and RF Controller
Model No.: DS-WP
Compatible with 45 kinds of IC / Digital display/Stand-alone function/
Wireless remote control
Features
-
DMX512 to SPI decoder and RF controller with digital display.
-
Compatible with 45 kinds of digital IC RGB or RGBW LED strip, IC type and R/G/B order can be set.
Compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, SK6813, UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B(RGBW), SK6812(RGBW), WS2813(RGBW), WS2814(RGBW), UCS8904B(RGBW), LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A, GS8206, GS8208, UCS2904, SM16804, SM16825, SM16714(RGBW), UCS2603, UCS5603. -
DMX decode mode, stand-alone mode and RF mode selectable.
-
Standard DMX512 compliant interface, set DMX decode start address by buttons.
-
Under stand-alone mode, change mode, speed or brightness by bottons.
-
Under RF mode, match with RF 2.4G RGB/RGBW remote control.
-
32 kinds of dynamic modes, include horse-race, chase, flow, trail or gradual change style.
Technical Parameters
Input and Output
Input voltage | 5-24VDC |
---|---|
Power consumption | 1W |
Input signal | DMX512 + RF 2.4GHz |
Output signal | SPI(TTL) |
The number of dynamic modes | 32 |
Control dots | 170 pixels (RGB 510 CH) Max 900pixels |
Warranty and Protection
Warranty | 5 years |
---|---|
Protection | Reverse Polarity |
Safety and EMC
EMC standard(EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD,RED
Environment
Operation temperature | Ta: -20O C ~ +55OC |
---|---|
Case temperature (Max.) | T c: +65OC |
IP rating | IP67 |
Mechanical Structures and Installations
Wiring diagram
Note:
- If the SPI LED pixel strip is single-wire control, the DATA and CLK output is same, we can connect up to 2 LED strips.
- If the SPI LED pixel strip is two-wire control, we can connect up to 1 LED strips.
Operation
IC type, RGB order and pixel length length setting
- At rst you must rst assure IC type, RGB order and pixel length of the LED strip is correct.
- Long press M and ► key, prepare for IC type setup, RGB order, pixel length, automatic blank screen,
Short press M key to switch four item.
Press ◄ or ► key to setup value of each item.
Short press SETUP key, or timeout 10s, quit setting.
● IC type table:
No. | IC type | Output signal |
---|---|---|
C11 | TM1803 | DATA |
C12 | TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813 | |
UCS2903,UCS2909,UCS2912,WS2811,WS2812,WS2813,WS2815 | DATA | |
C13 | TM1829 | DATA |
C14 | TLS3001,TLS3002 | DATA |
C15 | Gw6205 | DATA |
C16 | MBI6120 | DATA |
C17 | TM1814B(RGBW) | DATA |
C18 | SK6812(RGBW),WS2813(RGBW),WS2814(RGBW) | DATA |
C19 | UCS8904B(RGBW) | DATA |
C21 | LPD6803,LPD1101,D705,UCS6909,UCS6912 | DATA,CLK |
C22 | LPD8803,LPD8806 | DATA,CLK |
C23 | WS2801,WS2803 | DATA,CLK |
C24 | P9813 | DATA,CLK |
C25 | SK9822 | DATA,CLK |
C31 | TM1914A | DATA |
C32 | GS8206,GS8208 | DATA |
C33 | UCS2904 | DATA |
C34 | SM16804 | DATA |
C35 | SM16825 | DATA |
C36 | SM16714(RGBW) | DATA |
C37 | UCS5603 | DATA |
C38 | UCS2603 | DATA |
- RGB order: O-1 – O-6 indicate six order (RGB, RBG, GRB, GBR, BRG, BGR).
- Pixel length: Range is 008-900.
- Automaticblankscreen: enable (“bon”) or disable(“boF”) automatic blank screen.
DMX decode mode
There are two DMX decode modes selectable.
DMX decode mode1: change light color by setting DMX decode address ;
DMX decode mod 2: switch light dynamic modes, control brightness and dynamic
mode speed via 3 different DMX decode addresses.
Long press M andSETUP key at the same time, prepare for setup DMX decode mode
Press ◄ or ► key to switch between DMX decode mode (display”d-1″ ) and DMX
decode mode (display”d-2″ ).
Short press SETUP key, and then return to DMX address interface.
mode 1:
-
Short press M key, when display 001-512, enter DMX decode mode.
-
Press ◄ or ► key to change DMX decode start address(001-512), long press for fast adjustment.
-
Short press SETUP key, prepare for setup decode number and multiple of pixels.
Short press M key to switch two item.
Press ◄ or ► key to setup value of each item.
Decode number(display “dno”) : DMX decode channel number, range is 003-600(for RGB).
Multiple of pixels(display “Pno”) : Each 3 DMX channel control length(for RGB), range is 001- pixel length. -
If there is a DMX signal input, will enter DMX decode mode automatically.
For example, the DMX-SPI decoder connect with RGB strip:
DMX data from DMX512 console:
DMX-SPI decoder output (start address: 001, decode channel number: 18, each 3 channel control length: 1): DMX-SPI decoder output (start address: 001, decode channel number: 18, each 3 channel control length: 3):
mode 2:
-
Short press M key, when display 001-512, enter DMX decode mode.
-
Press ◄ or ► key to change DMX decode start address(001-512), long press for fast adjustment.
For example, when the DMX start address is set to 001.
The address 1 of DMX console is for dynamic light type setting (32 modes), address 2 is for brightness setting (10 levels), address 3 is for speed setting (10 levels). -
Address 1of DMX console : dynamic light mode
1: 0-8
2: 9-16
3: 17-24
4: 25-32| 5: 33-40
6: 41-48
7: 49-56
8: 57-64
---|---
9: 65-72
10: 73-80
11: 81-88
12: 89-96| 13: 97-104
14: 105-112
15: 113-120
16: 121-128
17: 129-136
18: 137-144
19: 145-152
20: 153-160| 21: 161-168
22: 169-176
23: 177-184
24: 185-192
25: 193-200
26: 201-208
27: 209-216
28: 217-224| 29: 225-232
30: 233-240
31: 241-248
32: 249-255
● Address 2 of DMX console : Brightness (when address 2<5,turn off the light)
1: 5-25 (10%)
2: 26-50 (20%)
3: 51-75(30%)
4: 76-100(40%)
5: 101-125(50%)| 6: 126-150(60%)
7: 151-175(70%)
8: 176-200(80%)
9: 201-225(90%)
10: 226-255(100%)
---|---
● Address 3 of DMX console : Speed
1:0-25(10%)
2:26-50(20%)
3:51-75(30%)
4:76-100(40%)
5:101-125(50%)| 6:126-150(60%)
7:151-175(70%)
8:176-200(80%)
9:201-225(90%)
10:226-255(100%)
---|---
Stand-alone mode
-
Short press M key, when display P01-P32, enter stand-alone mode.
-
Press ◄ or ► key to change dynamic mode number(P01-P32).
-
Each mode can adjust speed and brightness.
Short press SETUP key, prepare for setup mode speed and brightness.
Short press M key to switch two item.
Press ◄ or ► key to setup value of each item.
Mode speed: 1-10 level speed(S-1, S-9, S-F).
Mode brightness: 1-10 level brightness(b-1, b-9, b-F).
Short press SETUP key , or timeout 10s, quit setting. -
Enter stand-alone mode only when DMX signal is disconnected or lost.
Dynamic mode list
No. | Name |
---|---|
P01 | Red horse race white ground |
P02 | Green horse race white ground |
P03 | Blue horse race white ground |
P04 | Yellow horse race blue ground |
P05 | Cyan horse race blue ground |
P06 | Purple horse race blue ground |
P07 | 7 color multi horse race |
P08 | 7 color horse raceclose + open |
P09 | 7 color multihorse raceclose + open |
P10 | 7 color scan close + open |
P11 | 7 color multi-scan close + open |
P12 | Blue White chase |
P13 | Green Cyan chase |
P14 | RGB chase |
P15 | 7 color chase |
P16 | Blue meteor |
P17 | Purple meteor |
P18 | White meteor |
P19 | 7 color meteor |
P20 | Red oat |
P21 | Green oat |
P22 | Blue oat |
P23 | Purple oat |
P24 | RGBW oat |
P25 | Red Yellow oat |
P26 | Green Cyan oat |
P27 | Blue Purple oat |
P28 | Blue White oat |
P29 | 6 color smooth sectionally |
P30 | 6 color oat |
P31 | 7 color jump sectionally |
P32 | 7 color strobe sectionally |
RF mode
Match: Long press M and ► key for 2s, display “RLS”, within 5s, press on/off
key of the RGB remote, display “RLO”, match is successful , then use the RF
remote to change mode number, adjust speed or brightness.
Delete: Long press M and ► key for 5s, until display “RLE”, delete all matched
RF remote.
Restore factory default parameter
● Long press ◄ and ► key, restore factory default parameter, display”RES”.
● Factory default parameter: DMX decode mode 1, DMX decode start address is 1,
decode number is 510, multiple of pixels 1, dynamic mode number is 1, chip
type is TM1809, RGB order, pixel length is 170, disable automatic blank
screen, without matched RF remote.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>