Lighting Olympia F5 Multi color RGB series LED neon flex Installation Guide
- June 5, 2024
- Lighting Olympia
Table of Contents
- Dimension
- Features
- Applications
- Model Encoding
- Technical Specification
- Lumen Output
- Construction
- Physical Specification
- Mold injection connector
- Other Accessories
- Mounting Channel
- Packing
- Testing
- Loading Chart
- Recommendation of extension wire
- Connection Diagram
- For more information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Lighting Olympia F5 Multi color RGB series LED neon flex
Dimension
Features
- Uniform and even light output
- Flat surface with 120 degree beam angle
- 60LEDs or 72LEDs,24V or 48V optional
- Dimmable with Dali, 0/1-10, DMX,PWM
- Full encapsulated with IP68 Level
- High Reliability
- 3 or 5 Years warranty
Applications
- Building facade, outline
- Cove lighting
- Sign and advertising lightin
- Linear lighting
- Additional lighting
- Decorative lighting
Model Encoding
S—— Side entry
D——Direct entry
B——Bottom entry
01—— right
02——left
03——double
SM—— male connetor cable
SF——female connector cable
SMF——male & female connector cable
Blank—–bare wire
Technical Specification
Model | F15-24V-5050-60-RGB | F15-24V-5050-72-RGB | F15-48V-5050-60-RGB |
---|---|---|---|
Operating voltage | 24V | 24V | 48V |
Power consumption | 12W/M | 13W/M | 12W/M |
Working Mode | PWM CV | PWM CV | PWM CV |
LED type | SMD5050 | SMD5050 | SMD5050 |
LED Quantity | 60 pcs/m | 72 pcs/m | 60 pcs/m |
Available Color | RGB | RGB | RGB |
Min. cutting Unit | 6 LEDs | 6 LEDs | 15 LEDs |
Min. cutting length | 10cm | 8.33cm | 25cm |
Max. length single feed | 10m | 10m | 20m |
Max. length double feed | 20m | 20m | 40m |
Bending direction | Horizontally | ||
Lumen maintenance | 70 000 Hours L70 25°C , 50 000 Hours L70 50°C | ||
Housing material | Eco PVC or Silicone | ||
Installation temperature | 0°C to +55°C | ||
Ambient temperature | -25°C to +55°C | ||
Ingress protection | IP68 wet location submersible* to 2m | ||
Warranty | 3 years as standard, 5 years warranty maximum |
Lumen Output
Construction
Physical Specification
Mold injection connector
(IP68 Factory Assembly only)
DIY Screw & Snap Connector Kit (IP67 Only)
Other Accessories
Mounting Channel
Model | Description | Dimension | Drawing |
---|---|---|---|
ALC15S01 | Use for : F15 & F21 |
Length option:1m,2m,35mm
Material:Aluminum alloy
Optional color:AS/AB/PW
Type: Standard| |
ALC15S01| Use for : F15 & F21
Length option:1m,2m,35mm
Material:Aluminum alloy
Optional color:AS/AB/PW
Type: Anti-drop for upside down installation| |
ALC15H01| Use for : F15 & F21
Length option:1m,2m,35mm
Material:Aluminum alloy
Optional color:AS/AB/PW
Type: Cable hiding| |
ALC15V01| Use for : F15 & F21
Length option:1m,2m,35mm
Material:Aluminum alloy
Optional color:AS/AB/PW
Type: Vertical installation| |
PC15/21S01-T| Use for : F15 & F21
Length option:1m,2m,35mm
Material:Plastic
Color: Transparent
Type: Standard| |
SSC15FLX| Use for : F15 & F21
Length option:10cm,30cm,50cm,100cm
Material: Stainless steel
Optional color: Polished
Type: Flexible| |
SSC15S01| Use for : F15 & F21
Length option: 5cm
Material: Stainless steel
Optional color: Natural color
Type: 316 stainless steel| |
Packing
Standard: Carton ( Paper reel inside)
Custom: Carton ( White box+plastic plate inside)
Testing
- Please note it is under normal range if there is 20-30% yellowing of PVC housing material when the product is used under direct sunlight or long-term high temperature & wet enviroment in 3 years.
- About the tolerance range of optical parameters (luminance, CCT, Watt, RA) for all product, the volume is plus and minus 10% fluctuation refering to IEC Standard.
- It’s normal for the tolerance range in total length, it occurs from the different production technology, environmental temperature and installation. the volume would be 0.1-5M±7mm, 5.1-10M±15mm, 10.1-20M±30mm.
Loading Chart
Power supply
Rated power
| 35W| 60W| 75W| 80W| 100W| 120W| 150W| 185W| 240W|
320W
---|---|---|---|---|---|---|---|---|---|---
12W
| 2m| 4m| 5m| 6m| 7.5m| 8m| 10m| 12.3m| 16m| 20m
13W| 2m| 3.5m| 4.5m| 4.8m| 6m| 7m| 9m| 10m| 13.5m|
19m
Note: These are the max recommended run lengths based on power supply
For example: It is recommended to use one 80W power supply for a single-
feed run of 6m at 12W/m.
Recommendation of extension wire
Maximum extension wire length according to Light power
Watts of light| 22AWG| 20AWG| 18AWG| 17AWG|
16AWG| 14AWG| 12AWG| 10AWG
---|---|---|---|---|---|---|---|---
| 0.34mm 2| 0.53mm 2| 0.82mm 2| 1.04mm 2| 1.38mm 2|
2.07mm 2| 3.29mm 2| 5.62mm 2
10W| 36m| 60m| 100m| 120m| 140m| 240m| 400m| 600m
20W| 18m| 30m| 50m| 60m| 70m| 120m| 200m| 300m
30W| 12m| 20m| 30m| 38m| 45m| 80m| 130m| 200m
40W| 8m| 15m| 22m| 28m| 35m| 60m| 95m| 140m
50W| 6m| 12m| 18m| 22m| 28m| 48m| 75m| 105m
60W| 5m| 10m| 15m| 18m| 22m| 36m| 60m| 88m
70W| /| 8m| 12m| 14m| 18m| 30m| 50m| 72m
80W| /| 6m| 10m| 11m| 14m| 24m| 40m| 58m
90W| /| 4m| 7m| 8m| 10m| 18m| 30m| 45m
100W| /| /| 5m| 6m| 7m| 12m| 22m| 32m
110W| /| /| 3m| 4m| 5m| 8m| 15m| 22m
120W| /| /| 2m| 2.5m| 3m| 0m| 8m| 12m
Note:
- The values doesn’t include the 0.6m cable connected to the front connector.
- To ensure the reliability of wire connection and avoid problem of voltage drop, the extension wire length should be smaller than the above recommended values.
Connection Diagram
Connect with CTR-361 PWM controller
Connect with DMX512 controller or DMX Console
For more information
Email:info@olympialed.com
Or visitwww.olympialed.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>