Lighting Olympia F16 Pixel chasing series led neon flex Installation Guide

: June 5, 2024
: Lighting Olympia

Table of Contents

Dimension
Features
Applications
Model Encoding
Technical Specification
Construction
Physical Specification
Mold injection connector
Other Accessories
Mounting Channel
Packing
Testing
Loading Chart
Recommendation of extension wire
Connection Diagram
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lighting Olympia F16 Pixel chasing series led neon flex

Dimension

Features

Uniform and even light output
Flat surface with 120 degree beam angle
RS485 IC built in, 10 pixels per meter
Connect with DMX Controller
Full encapsulated with IP68 Level
High Reliability
3 or 5 Years warranty

Applications

Building facade, outline
Applications
Cove lighting
Sign and advertising lighting
Linear lighting
Additional lighting
Decorative lighting

Model Encoding

S—— Side entry
D——Direct entry
B——Bottom entry

01—— right
02——left
03——double
SM—— male connetor cable
SF——female connector cable
SMF——male & female connector cable

Technical Specification

Model	F16-24V-5050-70-DMX-RGB	F16-24V-5050-70-DMX-RGBW
Operating voltage	24V	24V
Power consumption	15W/M	18W/M
Working Mode	DMX(RS485)	DMX(RS485)
LED type	SMD5050	SMD5050
LED Quantity	70 pcs/m	70 pcs/m
Available Color	RGB/3000K/DW	RGBW(2200K/3000K/4000K)
Min. cutting Unit	7 LEDs	7 LEDs
Min. cutting length	10cm	10cm
Pixels Qty/m	10 Pixels	10 Pixels
Max. length single feed	8m	8m
Max. length double feed	16m	16m
Bending direction	Vertically
Lumen maintenance	70 000 Hours L70 25°C , 50 000 Hours L70 50°C
Housing material	Eco PVC or Silicone
Installation temperature	0°C to +55°C
Ambient temperature	-25°C to +55°C
Ingress protection	IP68 wet location submersible* to 2m
Warranty	3 years as standard, 5 years warranty maximum

Construction

Physical Specification

Mold injection connector

(IP68 Factory Assembly only)

Other Accessories

Mounting Channel

Model

| Description| Dimension|

Drawing

---|---|---|---
ALC16S02| | |
ALC16S03| | |
ALC16H01| | |
PC16/17S02-T| | |
SSC16FLX| | |
SSC16S01| | |
ACC-HX-S2830C2| | |

Packing

Standard: Carton ( Paper reel inside)

Custom: Carton ( White box+plastic plate inside)

Testing

Please note it is under normal range if there is 20-30% yellowing of PVC housing material when the product is used under direct sunlight or long-term high temperature & wet enviroment in 3 years.
About the tolerance range of optical parameters (luminance, CCT, Watt, RA) for all product, the volume is plus and minus 10% fluctuation refering to IEC Standard.
It’s normal for the tolerance range in total length, it occurs from the different production technology, environmental temperature and installation. the volume would be 0.1-5M±7mm, 5.1 10M±15mm, 10.1-20M±30mm.

Loading Chart

Power supply

Rated power	35W	60W	75W	80W	100W	120W	150W	185W	240W	320W
15W	1.5m	3m	4m	4.3m	5m	6m	6.5m	9.5m	12.5m	17m
18W	1.5m	2.5m	3m	3.5m	4m	5m	6m	8m	10.5m	14m

Note: These are the max recommended run lengths based on power supply, the signal transfers from the left end.
For example: It is recommended to use one 80W power supply for a single feed run of 4.3m at 15W/m.

Recommendation of extension wire

Maximum extension wire length according to Light power

Watts of light| 22AWG| 20AWG| 18AWG| 17AWG| 16AWG| 14AWG| 12AWG| 10AWG
---|---|---|---|---|---|---|---|---
| 0.34mm 2| 0.53mm 2| 0.82mm 2| 1.04mm 2| 1.38mm 2| 2.07mm 2| 3.29mm 2| 5.62mm 2
10W| 36m| 60m| 100m| 120m| 140m| 240m| 400m| 600m
20W| 18m| 30m| 50m| 60m| 70m| 120m| 200m| 300m
30W| 12m| 20m| 30m| 38m| 45m| 80m| 130m| 200m
40W| 8m| 15m| 22m| 28m| 35m| 60m| 95m| 140m
50W| 6m| 12m| 18m| 22m| 28m| 48m| 75m| 105m
60W| 5m| 10m| 15m| 18m| 22m| 36m| 60m| 88m
70W| /| 8m| 12m| 14m| 18m| 30m| 50m| 72m
80W| /| 6m| 10m| 11m| 14m| 24m| 40m| 58m
90W| /| 4m| 7m| 8m| 10m| 18m| 30m| 45m
100W| /| /| 5m| 6m| 7m| 12m| 22m| 32m
110W| /| /| 3m| 4m| 5m| 8m| 15m| 22m
120W| /| /| 2m| 2.5m| 3m| 0m| 8m| 12m

Note:

The values doesn’t include the 0.6m cable connected to the front connector.
To ensure the reliability of wire connection and avoid problem of voltage drop, the extension wire length should be smaller than the above recommended values.