LG Energy Solution RESU Prime Series Compatible Storage Inverters Owner’s Manual
- June 10, 2024
- LG Energy Solution
Table of Contents
LG Energy Solution RESU Prime Series Compatible Storage Inverters
Product Information
The LG Energy Solution Home Battery, RESU Prime Series, is a storage battery that requires a compatible inverter for installation and usage. Using a non- approved inverter will void the warranty provided by LG Energy Solution. The product is compatible with the RESU10H Prime and RESU16H Prime models. The following inverters are currently compatible with the LG Energy Solution Home Battery, RESU Prime Series:
Product Usage Instructions
When installing and using the LG Energy Solution Home Battery, RESU Prime Series, please note the following instructions:
- All RESU installations require a compatible inverter. It is the installer’s responsibility to check that compatible inverters have required Standards approvals.
- Battery/Hybrid inverters should operate in On-Grid only and not in Off-Grid.
- For On-Grid applications where Back-up mode may be sometimes utilized, the backed-up circuits and battery/hybrid inverter must be properly sized to accommodate the loads required to be backed up.
- If using an approved inverter in Back-up mode, note that the battery will not charge during a blackout.
Compatible storage Inverters with RESU Prime
All RESU installations require a compatible inverter. Using a non approved inverter will void the warranty provided by LG Energy Solution. See below important instructions when installing and using RESU Prime.
- Battery/Hybrid inverters should operate in On Grid only. (Not in Off Grid)
- For On Grid applications where Back up mode may be sometimes utilized, the backed up circuits and inverters AC draw must not exceed the battery current limit specifications.
- Custom Conduit Gland for AU must be installed Cobalt Solar Part (CSE CHG 3/4NPT H3 5.5 1B)
Following list of Inverters are currently compatible with LG Energy Solution home battery, RESU Prime Series. It is installer’s responsibility to check that compatible inverters have required Standards approvals.
| INVERTER | BATTERY | REMARK |
|---|---|---|
| Brand | Model | Software Version 1) |
Prime
| RESU16H
Prime
| SE3000H SE5000H SE6000H SE8250H SE10000H| 4.13 or above| ○| ○| -Energy Hub
series only
-Required Interface: SESTI-S4 or DC Combiner Box
-Back-up option requires Solar Edge
Back-up Interface
| SBS5.0| 3.12.03.R or above| ○| ○| – Can use in Back-up Mode, but not Secure
Power Supply compatible : battery will not charge during blackout
– Inverter software package version:
3.12.0.R or above required.
– If the Inverter has firmware
1.02.73.R to 1.50.19.R then it will need to be updated to 3.11.64.R and then
3.12.03.R
| GEH5-10kW| ARM 18 or above| ○| ○| – Can use in Back-up mode
Only compatible with the software versions which are mentioned above.
Tower1, 108, Yeoui daero, Yeongdeungpo gu, Seoul, Republic of Korea. 07335
TEL: (82) 2 3773 1114
FAX: (82) 2 3773 7005
http://www.lghomebattery.com
http://www.lgensol.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>