LOCK CHOICE BS-35 Keypad Access Control User Manual
- October 29, 2023
- LOCK CHOICE
Table of Contents
LOCK CHOICE BS-35 Keypad Access Control
Description
The device is a standalone access control and proximity card reader which supports EM & MF card types. It builds-in STC microprocessor, with strong anti-interference ability,high security and reliability,powerful function and convenient operation. It’s widely used in high-end buildings, residential communities and other public places.
Features
| Ultra-low Power | Standby current is less than 30mA |
|---|---|
| Wiegand Interface | WG26 or WG34 input and output |
| Searching time | Less than 0.l s after reading card |
| Backlight keypad | Operate easily at night |
| Access ways | Card, Pin code, Card & Pin code, APP on the phone. |
| Independent codes | Use codes without related card |
| Change codes | Users can change codes by themselves |
| Delete users by card No. | The lost card can be delete by keyboard |
Specifications
| Working Voltage: DC12-24V | Standby Current: :530mA |
|---|---|
| Card Reading Distance: 1~ 3cm | Capacity: 2000 users |
| Working Temperature: -40°C ~ 60°C | Working Humidity: 10%~ 90% |
| Lock output load: :53A | Door Relay time: 0~ 99S (Adjustable) |
Installation
Drill hole according to the size of the device and fix the back shell with the equipped screw.Thread the cable through the cable hole. connect the wires according to your required function, and wrap the unused wires to avoid short circuit. After connecting the wire, install the machine. (as show below)
Wiring
| Color | ID | Description |
|---|---|---|
| Green | DO | Wiegand lnput(Wiegand Output in Card Reader Mode) |
| White | Dl | Wiegand lnput(Wiegand Output in Card Reader Mode) |
| Yellow | OPEN | Exit Button input terminal |
| Red | +12V | 12V + DC Regulated Power Input |
| Black | GND | 12V – DC Regulated Power Input |
| Blue | NO | Relay normally-on terminal |
| Purple | COM | Relay Public terminal |
| Orange | NC | Relay normally-off terminal |
Diagram
Common Power Supply
Special Power Supply
Reader Mode
Sound & Light indication
| Operate Status | LED Light Color | Buzzer |
|---|---|---|
| Standby | Red | |
| Keypad | Beep | |
| Operation Successful | Green | Beep- |
| Operation Failed | Beep-Beep-Beep | |
| Entering into Programming | Flash Red Slowly | Beep – |
| Programmable Status | Orange | |
| Exit Programming | Red | Beep- |
| Door Opening | Green | Beep- |
Advance setting
Master Card Operation
Read User Manual Online (PDF format)
Loading......