CENTEK CT-2720 Robot Vacuum Cleaner Instruction Manual

June 10, 2024
CENTEK

CENTEK CT-2720 Robot Vacuum Cleaner

CT-2720 Robot Vacuum Cleaner

Dear Customer,

Thank You for purchasing a CENTEK brand product. We guarantee flawless function of this item, provided the guidelines of its operation are observed.

PURPOSE OF THE DEVICE

This device is designed for automatic cleaning of dust and dirt from various surfaces (tiled, parquet floors, carpets, etc.). Use the appliance for domestic purposes only in accordance with this manual. The device is not intended for commercial use.
Use for any other purpose is considered improper. The manufacturer is not responsible for any damage caused by improper use of the device.

SAFETY PRECAUTIONS

ATTENTION
Use the appliance in strict accordance with this manual to avoid damage to the appliance and furniture, and to avoid personal injury.

  • It is forbidden to operate the device at temperatures below 0 and above 40 °C on wet and sticky surfaces.
  • Make sure there are no wires on the floor, including the cord from the vacuum cleaner’s charging station, which could tangle the vacuum cleaner.
  • Remove fragile items (vases, plastic bags) from the floor that could damage the appliance.
  • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of life experience or knowledge, unless they are supervised or instructed in the use of the appliance by a person responsible for their safety. Children must be supervised to prevent playing with the appliance
  • Do not place any objects on the vacuum cleaner when it is turned on.
  • Do not allow clothes or body parts (hair, nails, etc.) to get caught in the brush or drive wheel of the appliance to avoid injury.
  • Do not use the device to clean smoldering objects (cigarette butts, matches, etc.).
  • The appliance is not intended for cleaning long pile carpets (such carpets require special cleaning methods).
  • Do not allow the device to come into contact with hard and sharp objects (glass, nails, etc.).
  • Do not carry the vacuum cleaner by holding it by the protective cover or shock buffer.
  • Regular cleaning and maintenance of the vacuum cleaner and the docking station should only be carried out in the switched off or unplugged state.
  • Do not wipe any part of the instrument with a wet cloth or use liquids to clean it.
  • Use this instrument only with the supplied power supply.
  • Unplug the power supply from the outlet before cleaning or servicing the instrument.
  • The instrument has a built-in battery that can only be replaced by a qualified technician.
  • Batteries must be removed from the instrument before disposal.
  • Disconnect the device from the power supply before removing the battery.
  • Dispose of batteries safely.
  • To charge the batteries, only the power supply supplied with the device should be used.
  • Batteries, docking stations and chargers supplied by third parties must notbe used.
  • Do not disassemble the battery and docking station.
  • Do not place the docking station near heat sources (electric stoves, etc.).
  • Do not wipe the docking station with a wet cloth or touch it with wet hands.
  • Do not dispose of used batteries with household waste. Contact a specialized organization.
  • If the power cord is damaged, stop using the appliance immediately and contact the service center to replace the cord.
  • Transport the robotic vacuum cleaner in the switched off state and in its original packaging
  • Before a long period of non-use, fully charge the battery and place the instrument in a cool, dry place. Charge the battery at least once every 2 months to prevent damage to the battery due to excessive discharge.
REMOVING THE BATTERY
  • Make sure that the robot vacuum cleaner does not touch the docking station, let the device run until the battery is completely discharged and turns off.
  • Remove the battery cover screws.
  • Remove the battery cover, disconnect the connector and remove the battery
BATTERY HANDLING
  • The device has a built-in lithium battery. It is forbidden to disassemble the battery, expose it to increased loads and open flames.
  • The battery is operated in a low air pressure environment which, if mistreated, may result in an explosion or leakage of flammable liquids and gases.
  • Do not expose the battery to high temperatures or direct sunlight as this may cause the battery to explode.
  • Do not use the device if the battery is visibly swollen.
  • Dispose of the battery in accordance with local regulations. Do not dispose of the battery with normal household waste.
  • Do not attempt to replace, disassemble or modify the battery yourself.
  • Avoid increased mechanical stress and damage to the battery housing with hard objects. Damage to the battery may result in leakage, overheating, or fire.

Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

APPLIANCE DESCRIPTION

Appliance Description
Appliance Description

1 «Power / Auto cleaning / Pause» 9 Side brush
2 «Home» button 10 Rear wheel
3 Collision bumper 11 Charging contact metal plate
4 Speaker 12 Omnidirectional front wheel
5 Power switch 13 Side brush
6 Cleaning container 14 Battery compartment cover
7 Cliff sensors 15 Rear wheel
8 Charging contact metal plate 16 Main turbo brush
CHARGING BASE

Charging Base

Power indicator light 4 Power cord compartment
Charging contacts 5 Non-slip pads
Power port  
DRY CLEANING CONTAINER

Dry Cleaning Container

1 Coarse filter 5 Container release button
2 Foam filter 6 Container intake opening
3 НЕРА filter 7 Main container unit
4 Container lid  
WET CLEANING CONTAINER

Wet Cleaning Container

1 Water tank lid 5 Sealed water filling cap
2 НЕРА filter 6 Water tank unit
3 Foam filter 7 Container release button
4 Coarse filter  
REMOTE CONTROL

Remote Control

1 Auto Clean button
2 «Forward/Reverse/Left/Right» Buttons
3 Spiral mode button
4 Call button for the robot vacuum cleaner
5 Suction power selection button
6 Dock back button
7 «Start/Pause» button
8 Corner cleaning mode button
9 Water flow selection button

SCOPE OF SUPPLY

Scope of Supply

  • Robot vacuum cleaner – 1 pc
  • Docking station – 1 pc.
  • Charger – 1 pc.
  • Container for dry cleaning – 1 pc.
  • Container for wet cleaning – 1 pc.
  • User manual – 1 pc.
  • Left brush – 1 pc.
  • Right brush – 1 pc
  • Brush for cleaning the filter – 1 pc.
  • Microfiber for wet cleaning – 1 pc.
  • Remote control – 1 pc.
  • Foam filter – 3 pcs.
  • Coarse filter – 2 pcs.
  • HEPA filter – 3 pcs.

OPERATION

BEFORE STARTING WORK
  1. Remove foam inserts on each side (fig. 1).
  2. Place the docking station on a flat surface against a wall. Then connect the station to the mains.
  3. Do not install the station in places exposed to direct sunlight.
  4. Install the side brushes: align the left and right brushes with the marks on the bottom cover of the appliance (fig. 2). Insert the side brushes until you hear a click.
    Operation

NOTE : Make sure there is at least 1 m of free space around the docking station on the sides and at least 2 m at the front.
When installing, make sure that the power cord does not lie on the floor. Otherwise, the robot cleaner may catch it and disconnect the station from the network.
The indicator light on the charging dock is on when power is supplied to the dock and turns off when the device is charging.

NSTALLING THE WET CLEANING CONTAINER

  1. Install the wet cleaning mop (fig. 3).

  2. Open the water tank, fill it with water and firmly close (fig. 4).
    Operation

  3. Install the container into the main unit (fig. 5).

  4. Start Cleaning with the Wet Cleaning Function (fig. 6).
    Operation

NOTE:
When the floor washing is completed, remove the wet cleaning container and clean out the water tank. Remove the wet cleaning mop and clean it.

NOTES:
It is recommended to vacuum clean all floors at least three times before the first wet cleaning in order to prevent excessive accumulation and transfer of dust and dirt on the wet cleaning mop.
In order to prevent corrosion and damage to the appliance please do not use any detergents or disinfectants in the water tank.
Upon completion of wet cleaning remove the water tank, drain the remaining water and clean the wet cleaning mop to prevent the forming of mold and unpleasant odors.
Remove the wet cleaning container if there is no need for wet  cleaning.
The wet cleaning container is only designed for use on smooth  floors, as the mop can get caught on the carpet flooring and impede free movement of the vacuum cleaner.

CHARGING
  • Automatic: after cleaning the robot vacuum cleaner will automatically return to the charging base to recharge. The button indicator will keep on flashing.
  • Manual: in the standby mode press the button to send the vacuum cleaner back to the charging base to recharge. If the robot vacuum cleaner is stuck or cannot find the charging base, place it on the charging base manually to charge it.

NOTES

  • To extend the service life of the battery charge it for 5 hours for the first time.
  • Please keep the charging base connected to power supply, otherwise the robot vacuum cleaner will not find the charging base.
  • Close the Smart Life application to save the battery charge in your phone/ tablet during the cleaning process.
  • Furniture must be at least 98 mm high to allow the appliance to pass under it.

«HOME» BUTTON INDICATION DURING CHARGING

  • Blue light flashing – battery low / Return to charging base
  • Continuous blue light – charging in progress
  • No light – fully charged

OPERATING PROCEDURE

TURNING ON THE POWER AND CHARGING
  1. Place the robot vacuum cleaner on the charging base and turn on the power.
  2. The robot vacuum cleaner will start up when the power switch is moved from the OFF to the ON position, the indicator light will turn on.
  3. If the robot vacuum cleaner is not connected to the charging base, we recommend turning it off by sliding the power switch from the ON to the OFF position.
    Operation Procedure
PAUSE

During cleaning, press to suspend operation.
Then press to resume cleaning or the button to stop the current cleaning session. Press the button twice to cause the appliance to return to the charging base.

SLEEP MODE

If cleaning is suspended and the robot vacuum cleaner has not been connected to the charging base for more than 10 minutes, it will enter the sleep mode; press any button to reactivate it.

PREPARING FOR OPERATION

| А. AUTO CLEANING After pressing the button the robot vacuum cleaner will start cleaning in the auto mode, following a zigzag pattern.
---|---
| В. SPOT CLEANING Suitable for cleaning heavily contaminated local areas. The robot vacuum cleaner will move in a spiral pattern.
| С. EDGE CLEANING In this mode the robot vacuum cleaner will move along the walls, following the perimeter of the rooms.
| D. SCHEDULED CLEANING Use the Smart Life application to set up the cleaning schedule.

APPLICATION INTERFACE

  1. Cleaning modes: Smart cleaning (Auto), Cleaning along walls (Edge), Local area cleaning (Spot), Manual mode (Manual).
    NOTE : In order to change the cleaning mode, you will first have to terminate the current mode.

  2. Charging: when the robot vacuum cleaner is in the standby or auto cleaning mode, pressing the «Home» button will cause the device to search for the charging base for recharging.

SETUP

Setup

Press the «More» icon on the application’s home screen to go to the additional pages and select the relevant function for setting up.

  1. Suction power (Adhesion): power settings – low, normal, high.
  2. Cleaning log (Record): browse the cleaning history (if your device supports this function).
  3. Press «Call Robot»: the device will emit an audio signal.
  4. Water supply adjustment for wet cleaning: low, middle, high.
  5. Scheduled cleaning (Schedule): use the application to set the time of planned cleaning. Select and set up a planned cleaning and its commencement time.

DEVICE SETUP

  1. Press the upper right corner of the main control page to go to the robot vacuum cleaner setup page. Press the relevant position in the menu to go to the desired function.
  2. Add Sharing: Enter the account name for the robot vacuum cleaner you want to share.
  3. Delete Device: Press «Delete Device» to remove the linked device from the current account.

RESET WI-FI SETTINGS

If your phone cannot connect to the vacuum cleaner because you have changed the router configuration, forgotten the password, etc., you can start the setup once again (see sections «Adding a Device» and «Adding a Device Via an Access Point»).

NOTE

  • Before setting up the Wi-Fi connection ensure that the device is connecting to a 2.4 GHz Wi-Fi network.
  • Ensure that the robot vacuum cleaner is fully charged.

WI-FI NETWORK

  • Use the correct wireless network password.
  • Do not use a VPN (virtual private network) or proxy server.
  • The Wi-Fi router should support the 802.11b/g/n and lpv4 protocols.
  • The router should have a frequency range 2.4 GHz or a dual bandwidth which includes the 2.4 GHz range. The robot vacuum cleaner does not support the 5 GHz frequency range.
  • If the robot vacuum cleaner cannot connect to a dual bandwidth 2.4/5 GHz Wi-Fi network switch to 2.4 GHz in the Wi-Fi settings. You may switch back to default after setup is completed.
  • When connecting to a hidden network please ensure that you have entered a correct —SSID network name (case sensitive) and connect to a 2.4 GHz wireless network.
  • When using a wireless repeater ensure that the network name (SSID) and password are the same as the main network.
  • Install a firewall and Wi-Fi router port so that the robot vacuum cleaner could connect to the application server.
  • Network safety requirements: Use TKIP, PSK or AES/CCMP encrypted WPA and WPA2 type networks.

MAP MANAGEMENT

А. CREATING A ROOM MAP IN REAL TIME MODE
A real-time room map would help you to easily understand the cleaning route and the ambient situation. A floor area map will be generated after cleaning.
The map will be updated in real time mode after each cleaning in order to ensure optimal navigation.

В. CHANGING POSITION AND MAP RE-CREATION
When the robot vacuum cleaner and/or the charging base has been relocated or the surrounding environment significantly altered, the robot vacuum cleaner will try to establish locations and create a new map in accordance with the new surroundings.

  1. If the remapping is successful the robot vacuum cleaner will resume cleaning.
  2. Should remapping fail, the robot vacuum cleaner will recreate the map to ensure normal navigation for the new cleaning.
  3. If the remapping fails and the original map has included data on a «virtual wall» (restricted area), then the robot vacuum cleaner will not resume cleaning to avoid crossing to the restricted area.

NOTE:
Ensure that the robot vacuum cleaner starts the cleaning from the charging base every time.
Do not move the robot vacuum cleaner too often during cleaning, if accidentally moved – return it to the initial position.

MAINTENANCE AND CARE

DISASSEMBLY AND CLEANING THE MAIN TURBO BRUSH

Maintenance And Care

NOTE:
When reinstalling the main brush after cleaning ensure that it is properly latched in place.

CLEANING THE COARSE FILTER / FOAM FILTER / НЕРА FILTER
Remove the primary filter and the foam filter, you can wash the under a tap. The НЕРА filter can only be cleaned dry. After cleaning let the filters dry and reinstall them.
Maintenance And Care

CLEANING THE SIDE BRUSHES
  • Use the cleaning brush to remove the debris caught in the side brushes.
  • Use a clean cloth to clean the side brushes.
    Cleaning The Side Brushes

NOTE:
To maintain high cleaning efficiency regularly clean the side brushes.

If the side brushes are heavily contaminated, remove them and wash under a tap.

NOTE:
The water temperature for cleaning should be below 60 ºC. Reinstall the brushes only after they have dried completely.

CLEANING THE TOP SIDE OF THE VACUUM CLEANER

If dust and fingerprints occur on the top of the vacuum cleaner, you can clean it with a clean cloth.


CLEANING THE DRY CLEANING CONTAINER

Cleaning The Dry Cleaning Container

  • Press the container release latch and remove it.
  • Press and hold the latch with one hand and open the lid with the other to open and clean the dust container.
  • Clean the container.
  • Remove the filters and clean them from dust.
  • The container and filters can be washed under a tap. Reinstall the filters after cleaning and close the container lid, then reinstall the container in the vacuum cleaner.

NOTE:

  • The container and filter may only be reinstalled after they are completely dry. Do not expose the HEPA filter to wet treatment.
  • To avoid scattering the collected debris after removing the container, open the lid first, and only then shake out the contents of the collector bin.
  • After the start of operation we recommend to clean the dust container every three days during the first month, and once a week after that. Do not expose the filters to direct sunlight.
  • If you have washed the filters under a tap, please thoroughly dry them before next use.
CLEANING THE WET TREATMENT CONTAINER

Cleaning The Wet Treatment Container

  1. Press the wet treatment container release latch and remove it.
  2. Remove the wet treatment mop.
  3. Wash the mop under a tap, let it dry and reinstall it. Do not dry the mop in direct sunlight.

NOTE:

  • Do not wash the mop together with the wet cleaning container.
  • The water temperature should not exceed 60 degrees.
  • Machine washing the mop is not recommended
INSTALLING THE WET CLEANING CONTAINER SEAL

Installing The Wet Cleaning Container Seal

If you have previously accidentally removed the seal, reinstall it in its seat as shown in the picture above.

CLEANING THE OMNIDIRECTIONAL WHEEL

Cleaning The Omnidirectional Wheel

  1. Turn the vacuum cleaner upside down.
  2. Pull the wheel upwards to detach it from the mounting shaft.
  3. Wash the wheel and shaft with water to remove hairs and debris.
  4. Let the wheel dry and reinstall it; push it in to firmly seat it in place.
SENSOR CLEANING

Sensor Cleaning

Use a soft, dry cloth to clean the sensors.

NOTE:
Do not allow liquids, such as water or detergents, to contact the sensors.

POSSIBLE FAULTS

Problem Decision
Main turbo brush jammed Clean the brush roller
Side brush jammed Clean the side brush
Wheels jammed, device immobilized Check drive wheels
Container installed incorrectly Install the container properly according to

instructions
Cliff sensor operates incorrectly / sensor blocked/contaminated| Wipe the cliff sensor clean
The appliance is blocked| Remove obstacles
Collision bumper jammed| Check collision bumper
Vacuum cleaner is suspended| Set the vacuum cleaner back on the floor
Cannot connect to Wi-Fi| Wi-Fi is off. Reset Wi-Fi settings and repeat connection procedure. Poor Wi-Fi      signal. Ensure the device is within a Wi-Fi coverage zone with sufficient signal strength. With power supply turned on perform network connection  (see  manual sections “Adding a Device” or “Adding a Device Via an Access Point”), until a voice prompt is emitted. Only 2.4 GHz wireless networks are supported.
Cannot install application| Ensure that you phone’s OS version complies with the requirements: for iOS – ver. 9.0 and newer, for Android OS – ver. 5.0 and newer.
Robot vacuum cleaner will not charge| If the charging base not powered, ensure both ends of power cable are properly  connected. If the contact is poor, clean the contact areas on the charging base and  vacuum cleaner. Power sully will be restored when the power indicator lights.
Robot vacuum cleaner cannot find the charging base| Too many obstacles near the charging base. Move it to a free space. The device is too far from the charging base. Move it closer to the charging base.
Poor cleaning results| Remove  large debris from the  floor first.  If some floor section is left out of the  cleaning the robot vacuum cleaner will program its cleaning automatically.
Robot vacuum cleaner blocked| The device will actively try different ways to overcome the obstacle. Otherwise it is recommended to aid it manually.
Noise during cleaning| The main brush, side brush or main wheels are probably jammed. Turn the vacuum cleaner off and clean these components. If the omnidirectional wheel is jammed, pull it out for cleaning.
Insufficient suction power| Dust container is filled up and requires emptying. Main brush is jammed and requires cleaning. Let the foam filter dry.

If the abovementioned methods will not allow clearing the malfunction, you can try the following:

  1. Turn the power switch on the side of the device off and backon to restart the device;
  2. If the appliance constantly moves backwards, please press the collision bumper with your hand and restart the appliance.
  3. If the appliance does not move forward, check if the cliff sensor is blocked; clear the dust from the sensor window.
  4. If the malfunction cannot be cleared by restarting the device, contact an authorized service vcenter.

SPECIFICATIONS

Robot vacuum cleaner СТ-2720, СТ-2721
Navigation type gyroscope
Dimensions 320x320x76 mm
Rated voltage 19 V 0,6 А
Battery Li-Ion
Battery capacity 2600 mAh, 14,8 V
Rated power 32 W
Max. operating time without recharging 120 minutes
Suction power 600/1000/2700 Pa
Max. noise level 75 dB
Dry container volume 680 ml
Wet container volume (water/dust) 350/260 ml
Max. cleaning area 120 m²

Dock station
Dimensions| 183x140x76 mm
Nom. input voltage| 220-240 V ~50/60 Hz
Nom. output voltage| DC 19 V 0,6 A
Rated power| 11,4 W
Charging time| up to 6 hours
|
WiFi network support| 2,4 HHz
Voice control| Alexa, Google Assistant, Tmall Genie, Xiaodu
Additional functions| Wet cleaning, smart management, scheduled cleaning, building a room map with saving

DISPOSAL

The chemicals contained in the battery pollute the environment. Before disposing of the device, remove the battery and take it to a specialized collection point. The battery may only be removed at the end of its service life. Never allow the battery to come into contact with metal objects.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website https://centek.ru/servis. Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «Larina- Servis», Krasnodar, Phone: +7 (861) 991-05-42.

The product has the Certificate of Conformity

MANUFACTURER AND IMPORTER INFORMATION

Imported to EAEU by: OOO «Larina-Elektroniks». Address: Russia, 350080
Krasnodar, ul. Demusa, 14. Phone: +7 (861) 2-600-900.

DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

  1. The guarantee shall be valid if the following documentation conditions are observed:
    – The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
    The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.

  2. The guarantee shall be valid if the following operation conditions are observed:
    – the appliance is used in strict accordance with the present manual;
    – the safety rules and requirements are observed.

  3. The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.

  4. The guarantee does not apply in the following cases:
    – mechanical damage;
    – normal wear of the appliance;
    – non-observance of operation requirements or erroneous actions on the part of the user;
    – improper installation or transportation;
    – natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
    – ingress of foreign objects, liquids or insects into the inside of the appliance;
    – repairs or modifications to the appliance by unauthorized persons;
    – use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
    – failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
    a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
    b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
    – for battery-powered appliances – operation with inappropriate or depleted batteries;
    – for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.

  5. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.

  6. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.

  7. Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).
    The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.

CENTEK Logo

Documents / Resources

| CENTEK CT-2720 Robot Vacuum Cleaner [pdf] Instruction Manual
CT-2720 Robot Vacuum Cleaner, CT-2720, Robot Vacuum Cleaner, Vacuum Cleaner
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals