HUANANZHI H81M-I Motherboard User Manual

User Manual
H81M-I

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a successful computer assembly.
• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
• In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
• Please put the motherboard in an anti-static container or on anti-static pad if not needed.
• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal  components.
• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
• If you need any assistance in the process of installation，please contact our after-sales customer service or reach us on SHIJIAZHUANG official  -email:business@huananzhi.com for professional technical support.
• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
• Keep the motherboard away from moisture.
• Keep the user manual for future reference.
• Before plugging the power supply, please make sure the socket provides the corresponding voltage.
• In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
• In the event of any of the following conditions, have the board checked by a service technician:
  Liquid penetrated into the computer.
  Motherboard is exposed to moisture.
  Motherboard does not work even if you follow the instructions on user manual.
  Motherboard fell off to the ground and got damaged.
  Motherboard has clear signs of damage.

PACKING

• Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to  packaging or lack of accessories, contact us as soon as possible.
  1.1SHIJIAZHUANG H81M-I motherboard
  2.1DATA data cable
  3.1 User manual
  4.1Warranty Card

BRIEF INTRODUCTION

Features
CPU: Intel ®LGA1155 4th Intel Core™
RAM: 2*DIMM supports up to 16GB DDR3
1600/1333MHZ Notebook memory
Two-Channel Memory Architecture
Actual memory data rate depends on CPU type and DRAM module
I/O effects: 1 x SATA3.0 (maximum transfer speed up to 6GB/s)
1 x SATA2.0 (maximum transfer speed up to 2GB/s)
2 x USB3.0 interface
2 x USB2.0 ports
1 x RJ45 Network card interface
1 x DC 1 x HDMI-Compatible
1 x VGA
Audio: Realtor Audio Trans coder
Realtor 5.1 Channel High Fidelity
Audio Audio output: Front Out/Front Speaker Out
Audio input: Microphone input
Ethernet: 1 x Realtor Pie Gigabit LAN
Expansion slot:
1 x M.2 NAME Pie 2.0X4 (key M)2280
1 x MSATA3.0 1 x M.2 WIFI NIFF

MOTHERBOARD DIAGRAM

1-1 H81M-I Motherboard Illustration

Rear I/O Panel

Installation And Settings

NOTICE
please check the motherboard where all pins marked with number “1” or white bold line are position “1”.

2-5 CPU Installation

• In order to properly place the CPU  in the motherboard, the surface of the LGA1150 CPU has two pairs of starting points and a golden triangle. Golden triangle indicates Pin1

1. Remove the screw from the screw base
2. Remove the screw base
3. Tighten the screw base screwed into the length M.2 module to the M.2 interface distance hole
4. Insert your M.2 module into the M.2 interface at a 30 degree angle 2-6 M.2 Interface Installation
5. Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base

2-7Memory Installation

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installation.
2. Align the memory module into the slot and press
3. Let the snaps on both ends of the slot automatically bounce

Drivers Installation

1. Drivers listing:
   Driver Directory| Driver Description| Operating System
   ---|---|---
   H8IM- Chip set Driver| Intel chip. information installation| win7/win10/win11
   H81M-1 Sound Card Driver| Realtor series sound card driver installation| win7/win10/win11
   SIBILANT Driver| Realtor network card driver installation| win7/win10/win1l

2. Intel Chip Information Installation
   Run “Control Panel – System – Hardware – Device Manager”  Click the right mouse button to change the driver’s hardware device and proceed with the installation below:  Option: Property – Update driver| – Not connect to Internet –  Manually installation  Find the corresponding directory  Select “Next step”

3. Audio driver installation
   Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for  installation.
   3.1Audio driver installation (take HD Audio series for example)  Run “driver installer”:/H81M-IAudio/Realtek_Audio_XPWin7 8/setup.ex  Click on “next”to continue,and distinguished”  The system will automatically restart itself to finish the installation
   3.2 Installation of audio driver(take HD Audio series for example)  Getting into Windows desktop, choose “setting”/ “con- troll”,and then “add/remove programs”.  tare, choose “Re- alter High Definition Audio Driver” in the menu and click on “add/remove”so that the driver will be automatically
   removed.

4. Driver installation of external video card  Run “driver installer”, take Setup.exe, Click on “next”- “yes”  -“next”  “next”and”finished”h The system will automatically  ears  for devices  to complete the installation

5. Driver installation of network
   Run “driver installer”: H81M-I LAN/RTL810x_8111_win7/ setup.exe  click on “next”-  “installation”- “finished”and restart  the computer,  and restart the computer, The system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, COS SETUP normally stores all kinds of detain COS DRAM of the motherboard. When the computer is shut down, motherboard’ s battery will supply power to COS DRAM. When the computers turned on and starts POST(Power On Self Test), press “Delete/Del” key to enter into AMI BIOS COS SETUP main page. Motherboard warm boot key is 7.
Menu: please pay attention to every option in the settings menu. When there s triangle shaped symbol on the left side of menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.

1. Main Menu Function

2. Main
   System Overview
   Date/Time settings, HDD specs/Monitor  type settings.

3. Advanced
   Advanced Settings
   BIOS special function settings, such as virus alert, booting disk priority etc.

4. Chi pest
   Advanced Chi pest Settings

5. Boot
   Boot Settings

6. Security
   Security Settings

7. Save
   Save Setting

8. Exit
   Exit Options
   Exit settings include loading of optimized defaults value/ loading of fail- safe defaults / discarding changes/ exiting without saving Exit settings include loading of  optimized defaults value/ loading of fail-safe defaults / discarding sang- es/ exiting without saving,

References

• 华南金牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>